AMZCHEF ZM5003 Smoothie Blender

Step 1: Add ingredients.

Illustration showing small brown particles (ingredients) being poured into the top of a tall, cylindrical cup.

Step 2: Secure the base.

Illustration showing the cup held steady, with an arrow indicating the base being rotated counter-clockwise to secure it.

Hold the cup still and turn the base anti-clockwise until it is tightened.

Step 3: Position the cup.

Illustration showing the cup being flipped upside down, so the base is now at the bottom.

Flip the cup over so that the base is underneath.

Step 4: Attach the cup to the blender.

Illustration showing the assembled cup being aligned with the blender base, with arrows indicating it being pressed down. Four grooves on the cup's connector are visible.

Align the four grooves with the blender and press them down.

Step 5: Installation complete.

Illustration showing the fully assembled blender unit, signifying completion.

Installation completed.

Step 1: Remove the cup.

Illustration showing the assembled blender unit, with an upward arrow indicating the cup is being lifted or pulled away from the base.

Pull the mixing cup upwards.

Step 2: Loosen the base.

Illustration showing the cup held steady, with an arrow indicating the base being rotated clockwise to loosen it.

Hold the cup still and turn the base clockwise until loosens.

Step 3: Remove the cap.

Illustration showing the cap of the blade assembly being turned counter-clockwise. The cap has 'OpenClose' markings.

Turn the cap counterclockwise until it is tightened.