iLive Wireless Party Speaker
User's Guide for Model ISB202 v2892-01
Features
- Bluetooth wireless 5.0: range 59 ft.
- Micro SD card port
- Digital volume control
- Voice prompts
- Built-in rechargeable battery: approximately 7 hrs of playtime at 50% volume
- Micro-USB port for battery recharge
Includes
- User's Guide
- Micro-USB to USB charging cable
Controls
Diagram showing speaker controls with numbered buttons:
- 1. Mode: Press to change source modes to Bluetooth, Aux, USB or Micro SD/TF. Press and hold to turn LED lights ON/OFF.
- 2. Volume-/Previous: Press to decrease volume level. Press and hold to play previous track.
- 3. Play/Pair: While playing music, press to play/pause tracks. Press and hold for 3 seconds to pair Bluetooth device manually.
- 4. Volume+/Next: Press to increase volume level. Press and hold to play the next track.
Note: To turn voice prompts ON/OFF, press and hold both the Volume+ / Volume- buttons for 3 seconds.
Charging the Battery
To charge the internal battery, plug the USB charging cable into the DC Power Input on the speaker and a powered on computer or USB power adapter (not included) and standard power outlet. Charging time is approximately 4 hours.
When the battery is low, a voice will announce "Low Battery," then the unit will automatically power OFF.
While the unit is charging, the LED Indicator will display a solid red light. When the battery is fully charged, the light will turn off.
Inputs
Diagram showing input ports: Aux In, Power Switch, USB Port, TF/Micro SD Port, Microphone Input.
- Indicator LED: Shows charging status.
- Power Switch: Turns the unit ON/OFF.
- Aux In: Requires a 3.5mm audio cable (not included). Connect to the audio output/headphone jack on an audio device. The speaker will automatically switch to Aux Mode.
- Microphone Input: For connecting a microphone.
- USB Port: For connecting USB media.
- TF/Micro SD: For connecting Micro SD memory cards.
- DC Power Input: For charging the battery via Micro-USB.
Pairing & Playing Bluetooth Audio
- When first powered on, the speaker defaults to Bluetooth Mode and is ready to pair automatically. When pairing, remain within 3 feet of the Bluetooth device.
- Using the controls on your Bluetooth device, select "ISB202" in the Bluetooth Settings to pair. Refer to your specific device's user manual for more information.
- When successfully paired, a voice will announce, "Bluetooth is connected." The LED Indicator will display a solid blue light. Your Bluetooth device will now be heard through the speaker.
- Use the controls on the connected Bluetooth device to select and play audio. Use the speaker controls or the connected Bluetooth device to play, pause, and adjust the volume level.
- After initial pairing, the speaker will automatically connect to the last Bluetooth device used whenever it is in Bluetooth Mode. If your device becomes unpaired or cannot connect, press and hold the Play/Pair button to enter Pairing Mode. A voice will announce, "Bluetooth is connecting," and you can connect to the speaker manually.
USB & TF/Micro SD
- Load a USB or a Micro SD memory card into the appropriate media port.
- The speaker will automatically switch to USB/SD mode.
- Use the controls on your device to select and play audio from the connected drive.
Customer Support
Customer Service: 1-888-999-4215 | Email Support: prodinfo@dpiinc.com | Email Parts: partsinfo@dpiinc.com
For Warranty Information and the most up-to-date version of this User's Guide, visit www.iLiveElectronics.com.
To download this User's Guide in English, Spanish, or French, or to get answers to frequently asked questions, visit the support section at: www.iLiveElectronics.com.
FCC STATEMENT
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.
Additional Warnings
- WARNING: To prevent fire or shock hazards, do not expose this unit to rain or moisture.
- WARNING: Where the mains plug or appliance coupler is used as the disconnect device, such disconnect device shall remain readily operable.
- Lithium batteries, like all rechargeable batteries, are recyclable and should be recycled or disposed of according to state and local guidelines. They should never be disposed of in normal household waste, and they should never be incinerated, as they might explode. Contact your local government for disposal or recycling practices in your area.
- WARNING: This product can expose you to chemicals including lead, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.
This product meets and complies with required Federal product guidelines.
Copyright © 2022 Digital Products International (DPI, Inc.) All other trademarks appearing herein are the property of their respective owners. Specifications are subject to change without notice.
Models: PT403, ZJP-PT403, ZJPPT403, ISB202 Wireless Party Speaker, Wireless Party SpeakerRelated Documents
![]() |
iLIVE ISB310 Wireless Tailgate Party Speaker User's Guide User's guide for the iLIVE ISB310 Wireless Tailgate Party Speaker, covering safety instructions, features, control panel, and operation for Bluetooth, USB, SD, FM radio, and microphone. |
![]() |
iLive ISBW337 Waterproof Wireless Speaker User's Guide Comprehensive user guide for the iLive ISBW337 Waterproof Wireless Speaker, detailing features, setup, Bluetooth connectivity, speakerphone operation, charging, water resistance, and support. |
![]() |
iLive ISBW240BDL Speaker Pairing Guide Learn how to easily pair two iLive ISBW240BDL Bluetooth speakers for a Party Plus experience. This guide provides step-by-step instructions for connecting your speakers. |
![]() |
iLive ISB182 Portable Wireless Speaker User's Guide User guide for the iLive ISB182 Portable Wireless Speaker, covering features, setup, Bluetooth pairing, audio playback, line input, power, warnings, and contact information. |
![]() |
iLive ICWFV428 Voice Activated Clock with Amazon Alexa User Guide Comprehensive user guide for the iLive ICWFV428 Voice Activated Clock with Amazon Alexa, covering setup, Wi-Fi connection, Alexa integration, alarms, app usage, Bluetooth, and troubleshooting. |
![]() |
iLive ISB312 Wireless Jobsite Speaker User Guide User's guide for the iLive ISB312 Wireless Jobsite Speaker, covering important safety instructions, features, operation, and troubleshooting. |
![]() |
iLive Wireless Multi-Room 2.1 Sound Bar with Amazon Alexa User's Guide Comprehensive user guide for the iLive Wireless Multi-Room 2.1 Sound Bar with Amazon Alexa (Model ITWFV678). Learn about setup, features, Wi-Fi connection, Alexa integration, app usage, Spotify Connect, troubleshooting, and customer support. |
![]() |
iLive Wave Wireless Speaker System ISB273B User's Guide User's guide for the iLive Wave Wireless Speaker System, Model ISB273B. This guide covers features, controls, Bluetooth pairing, Party+ mode, charging, safety instructions, and customer support. |