iLive ISB182 Portable Wireless Speaker User's Guide
Introduction
This guide provides information for the iLive ISB182 Portable Wireless Speaker.
Controls Overview
The speaker features several controls:
- Pair button: Press and hold to begin connecting a Bluetooth device.
- Volume buttons (+/-): Press and hold to increase or decrease the volume.
- Play/Pause button: Press to play or pause audio playback.
- On/Off switch: Adjust the switch to turn the unit on or off. Always ensure it is switched to the OFF position when not in use.
The speaker also includes a Pairing Indicator light, which flashes blue quickly during pairing and shows a solid blue light when successfully connected.
A built-in Stand is provided for positioning the speaker.
Features
- Supports A2DP (Advanced Audio Distribution Profile)
- Built-in speakers
- 3.5mm audio input
- Micro-USB port for battery recharge
- LED pairing indicator
- Low battery indicator
- DC battery power: built-in rechargeable lithium-ion battery
- Metal speaker grill
Included
- Micro USB to USB charging cable
Power
USB Power
The speaker requires a Micro USB to USB cable (included) for charging. During the initial charge, continue charging for at least 2 hours after the battery indicator light turns green. Note: The connected PC must not be in sleep mode during charging.
Indicator Status:
| Status | Indicator Light |
|---|---|
| Power Off | No light |
| Charging | Red light |
| Fully Charged | Green light |
| Low battery | Flashing red light |
Illustration showing the speaker connected via Micro USB cable to a computer for charging.
Connecting and Playing Audio
Pairing a Bluetooth Device
- Turn on the unit using the On/Off switch. The Pairing Indicator will flash blue quickly.
- Press and hold the Pair button until a beep sounds. Remain within 3 feet of the unit while pairing.
- Using your Bluetooth device's settings, select "ISB182" to pair. If prompted for a password, enter "0000". Refer to your device's manual for specific pairing instructions.
- When successfully paired and connected, the Pairing Indicator will display a solid blue light and a beep will sound from the unit. The unit will remain paired unless manually unpaired.
Playing Audio Wirelessly
- Follow the instructions for Pairing a Bluetooth Device.
- Use your connected Bluetooth device's controls to select a track.
- To play, pause, or skip tracks, use your Bluetooth device's controls or press the Play/Pause button on the unit.
- Audio played through the connected Bluetooth device will be heard through the speakers.
- Press and hold the Volume (+/-) buttons to adjust the volume.
Using the Line Input
- Plug one end of a 3.5 mm audio input cable (not included) into the Line Input on the unit.
- Plug the other end of the cable into the audio output/headphone output of your MP3 Player or other audio source.
- Turn on the unit using the On/Off switch.
- Audio played through the connected device will be heard through the speakers. Note: Any audio playing via Bluetooth will cease once the 3.5mm audio source is connected.
Warnings and Precautions
- WARNING: To prevent fire or shock hazards, do not expose this unit to rain or moisture.
- WARNING: Do not place the unit on soft, porous, or sensitive surfaces without a protective barrier to avoid damaging the surface.
- WARNING: Ensure the mains plug or appliance coupler, used as the disconnect device, remains readily operable.
- Note: This device uses an internal rechargeable lithium-ion battery designed for the device's lifetime. If the battery appears dead after multiple charging attempts, contact support at 1-888-999-4215.
- Never disassemble the unit or attempt to remove the battery, as this could cause leakage of an electrolytic substance.
FCC Warnings
Warning: Modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used according to instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment causes harmful interference to radio or television reception (which can be determined by turning the equipment off and on), the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Warranty and Contact Information
For Warranty Information and the most up-to-date version of this User's Guide, visit: www.iLiveElectronics.com
Contact Information:
- Email Support: prodinfo@dpiinc.com
- Email Parts: partsinfo@dpiinc.com
- Phone Support: 1-888-999-4215
- Website: www.iLiveElectronics.com
International Support
To download this User's Guide in English, Spanish, or French, or to get answers to frequently asked questions, visit the support section at www.iLiveElectronics.com.
The document is also available in Spanish and French at the same website.
Eco-friendly manufacturing symbol.
