Draper IntelliFlex I/O S1 - Single Zone Wired Wall Switch

Overview

The IntelliFlex I/O Single Zone Wall Switch is a smart user input device that can be customized to operate roller shades, venetian blinds, or send a signal to a third-party Building Management system via the IntelliFlex I/O network. The I/O switch can be programmed to control a single system or zone, moving it to any position with a single touch. Swipe gestures are also recognized and quickly move the shades to the fully open or closed positions. Power for the switch is provided through the IntelliFlex I/O network using a single Ethernet cable for power and communication. A zone can be configured to control any number of shades on an IntelliFlex I/O network using the onboard programming buttons, without rewiring or the use of external configuration devices. Integrated LEDs provide users real time system status, allowing them to know when the switch is pressed, motors are in operation, or when the switch is rendered inactive due to other system priorities.

Features

• Control any number of motors in an IntelliFlex I/O network.
• Can be used with any number of intermediate stops, or no stops at all.
• Integrated LEDs provide system status to users.
• Standard Decora size and fits into any standard single gang box.

Technical Specifications - Single Zone Wired Wall Switch

Input Power: 24V DC

Material: ABS plastic

Operating Temp: Ambient

Dimensions: 4 1/8" x 1" x 7/8" (105 x 45 x 22mm)

Mounting: Single Gang

Shipping Weight: 2lb. (0.9 kg)

Usage: Indoor Use Only

Note: NDC Required (included)

IntelliFlex I/O System Overview

The IntelliFlex I/O system offers a complete control solution for Motorized FlexShades®.

User Input Devices:

• Wired Single Zone Switch (S1)
• Wired Dual Zone Switch (S2)
• Handheld RF Remote (RFR)

Network Devices:

• IR Transmitter and Receiver (IRT/R)
• IR Transmitter (IRT)
• Network Device Connector (NDC)
• Wireless Network Gateway (WNG)
• AV Gateway (AVG)
• Sensor/Scheduler Interface (SSI)
• SSI w/ Automated Glare Control (SSI+)
• Contact Closure Interface (CCI)
• Central Network Controller (CNC)
• IP Gateway (IPG)
• 3-Port Network Device Connector (NDC3)

Motor Control:

• 1 Motor Controller w/enclosure (1MC)
• 1 Motor Controller (1MC)
• 4 Motor Controller w/enclosure (4MC)

Tools & Sensors:

• Wind Speed Sensor
• External Brightness Sensor
• Internal Sun Sensor
• Motor Limit Tool (MLT)
• IntelliFlex I/O Installation Kit (IO-Kit)

Third Party Integration:

• 3rd Party Control Integration: Allows integration with systems like Lutron, Crestron, and others via the AV Gateway.
• Building Management System Integration: Allows IntelliFlex I/O shading systems to integrate via BACnet IP, acting as a BMS integration option and a router between control and building IP networks.

IntelliFlex I/O Compatible Components

Wiring Recommendations

For low voltage wiring requirements, Draper recommends consulting with a professional low voltage electrical contractor. All low voltage wiring must be run separately from line voltage wiring.