ED-IPC3020 Industrial Computer
Manufacturer: EDA Technology Co., Ltd
Powered by: Raspberry Pi 5
Product Overview
The ED-IPC3020 is an industrial computer designed for robust performance, powered by the Raspberry Pi 5 platform. It features a Broadcom BCM2712 4-core Arm Cortex-A76 64-bit CPU operating at 2.4GHz, coupled with up to 16GB of LPDDR4X RAM. The system offers flexible storage through a Micro SD card slot and an M.2 NVMe SSD interface. Connectivity is extensive, including multiple USB ports (USB 3.0 and USB 2.0), serial communication ports (RS232, RS485), Gigabit Ethernet with optional Power over Ethernet (PoE) support, and dual Micro HDMI outputs capable of driving two 4Kp60 displays simultaneously. It also provides stereo audio input and output, a USB Type-C power input with an ON/OFF switch, and an integrated Real-Time Clock (RTC) with supercapacitor backup. The device boasts a fanless design with a high-quality metal casing for efficient heat dissipation.
Specifications
| Category | Specification |
|---|---|
| System | |
| CPU | Broadcom BCM2712 4-core Arm Cortex-A76 64-bit 2.4GHz |
| VPU | H.265 (HEVC) up to 4Kp60 decoding |
| GPU | OpenGL ES 3.1 & Vulkan 1.2 |
| Memory | 4GB/8GB/16GB LPDDR4X-4267 SDRAM options |
| Storage | Micro SD card slot (supports 64GB/128GB/256GB SD cards), M.2 NVMe SSD slot (supports 128GB/256GB SSDs) |
| Software Parameters | |
| Operating System | Raspberry Pi OS (Desktop/Lite) 32-bit or 64-bit |
| Front Panel I/O | |
| Audio Output | 1 x Green 3.5mm audio jack (HPO), stereo output |
| Audio Input | 1 x Red 3.5mm audio jack (LINE IN), stereo input |
| RS485 Interface | 1 x RS485 interface, 3-Pin 3.5mm pitch terminal block, with 120Ω resistor, signal definition: GND/A/B |
| RS232 Interface | 1 x RS232 interface, 3-Pin 3.5mm pitch terminal block, signal definition: GND/TX/RX |
| USB 2.0 Interface | 2 x USB 2.0, Type-A connectors, each supporting up to 480Mbps |
| Rear Panel I/O | |
| USB 3.0 Interface | 2 x USB 3.0, Type-A connectors, each supporting up to 5Gbps |
| 1000M Ethernet Interface | 1 x Ethernet interface (10/100/1000M adaptive), RJ45 connector, supports PoE (optional) |
| Back Panel I/O | |
| SD Card Slot | 1 x Micro SD card slot, for system boot from SD card |
| Side Panel I/O | |
| HDMI Interface | 2 x HDMI, Micro HDMI connectors, support 4K 60Hz resolution. (Note: Some Micro HDMI cables may have shorter connectors, recommend official Raspberry Pi Micro HDMI to standard HDMI adapter cable). |
| Power Interface | 1 x USB Type-C connector, supports 5V 5A power input. |
| Buttons & Indicators | |
| ON/OFF Button | 1 x Power button for device ON/OFF. |
| PWR Indicator | 1 x Red LED for power status. |
| ACT Indicator | 1 x Green LED for system activity status. |
| COM1~COM2 Indicators | 2 x Green LEDs for serial port communication status. |
| Internal I/O | |
| M.2 M Key | 1 x M.2 M Key connector, for external SSDs and high-speed devices, compatible with M.2 2230, 2242, 2260, supports boot from SSD. |
| Expansion Features | |
| RTC | Integrated supercapacitor for RTC backup power, ensuring system clock accuracy even when powered off. Optional CR1220 battery holder. |
| Buzzer | Configurable for alerts or error indications. |
| Electrical Parameters | |
| Input Voltage | 5V DC |
| Max Power Consumption | 25W |
| Mechanical Parameters | |
| Dimensions | 102.8mm x 89.5mm x 32.5mm (L x W x H) |
| Weight | Approx. 300g |
| Mounting | Desktop or wall-mount installation |
| Wireless | Wi-Fi 802.11ac (dual-band), Bluetooth 5.0/BLE |
| Environmental Parameters & Regulations | |
| Operating Temperature | -25°C to 60°C |
| Storage Temperature | -25°C to 60°C |
| Operating Humidity | 5% - 95% (non-condensing) |
| Certifications | FCC, CE (EN IEC 62368-1, EN IEC 62311, EN IEC 61000-3-2, EN IEC 61000-3-3, EN 55032, EN 55035, EN 301 489-1, EN 301 489-3, EN 301 489-17, EN 301 489-52, EN 301 328, EN 301 440, EN 301 511, EN 301 908-1, EN 301 908-2) |
System Block Diagram Description
The system architecture diagram illustrates the ED-IPC3020's internal connections. The core is the Raspberry Pi 5, featuring a Broadcom BCM2712 CPU and LPDDR4X RAM (4GB/8GB/16GB options). It connects to Wi-Fi/Bluetooth modules via SDIO. The unit provides multiple interfaces: a USB Type-C power input (5V 5A), a Micro SD card slot for boot, two Micro HDMI ports for dual 4K 60Hz displays, two USB 3.0 Type-A ports, two USB 2.0 Type-A ports, RS232 and RS485 serial interfaces via 3-pin terminal blocks, and stereo audio jacks (Line In/Out). An M.2 M Key slot supports PCIe 2.0 for high-speed SSDs. The system includes an integrated RTC with supercapacitor backup and a buzzer for alerts. A 1000M Ethernet port supports optional Power over Ethernet (PoE). Status indicators are provided for Power (PWR), Activity (ACT), and Serial Communication (COM1, COM2).
Dimensions
The device measures 102.8mm in length, 89.5mm in width, and 32.5mm in height.
Ordering Information
The product ordering code follows the format: EDATEC-IPC3020-[RAM]-[SSD]-[SD Card]-[PoE].
- RAM options:
04(4GB),08(8GB),16(16GB). - SSD options:
0(Without SSD),1(128GB SSD),2(256GB SSD). - SD Card options:
00(Without SD Card),32(32GB SD Card),64(64GB SD Card). - PoE option:
P(With PoE Module), blank (Without PoE Module).
Note: As the Raspberry Pi 5 lacks onboard eMMC storage, selecting at least one of an SD card or an SSD is mandatory.
Example: ED-IPC3020-04321-P signifies a configuration with 4GB DDR RAM, a 32GB SD Card, a 128GB SSD, and a PoE Module.
Optional Accessories
Power Supplies
Raspberry Pi 27W USB-C Power Supplies are available in various plug configurations (UK, AU, IN, EU, US) and colors (White/Black). Order codes range from SC1149 to SC1158.
Cables
A Raspberry Pi Micro-HDMI to standard HDMI cable (1 meter length) is recommended for display connectivity. Order code SC0358.
Mounting Brackets
Wall-mount brackets are available for the ED-IPC3020 and ED-PAC3020. Order code ED-ACCBKT-L3020.
Package Contents
- 1 x ED-IPC3020 Host Unit
- 4 x Footpads
- 1 x Tweezers (for SD card insertion/removal)
