EDA ED-IPC3100 Industrial Computer
Data Manual
Built: 2025-07-09
By EDA Technology Co., Ltd
Features: Powered by Raspberry Pi CM5, ROHS compliant, Made in PRC
Overview
The ED-IPC3100 is an industrial computer based on the Raspberry Pi CM5 platform, designed for robust performance in demanding environments. It features a powerful Broadcom BCM2712 processor, ample memory and storage options, extensive I/O connectivity, and support for wireless communication.
- Processor: Broadcom BCM2712 4-core Cortex-A76 (ARM v8) 64-bit 2.4GHz SoC
- Memory: Up to 16GB LPDDR4 RAM and 64GB eMMC flash
- Storage Expansion: Supports Micro SD cards and M.2 NVMe SSDs
- Networking: Dual Ethernet ports (1x Gigabit, 1x 100M)
- Serial Ports: 4 x RS232/485 ports with isolation, ESD, and surge protection
- Wireless Connectivity: Integrated 2.4GHz & 5GHz Wi-Fi, Bluetooth, and optional 4G LTE
- Power Input: Wide voltage range of 9V~36V DC with protection features
- Operating Temperature: -25℃ to 60℃
- Mounting: DIN rail mounting support
Specifications
| Category | Specification |
|---|---|
| System | |
| CPU | Broadcom BCM2712 4-core Cortex-A76 (ARM v8) 64-bit 2.4GHz SoC |
| VPU | H.265 (HEVC), up to 4Kp60 decoding |
| GPU | OpenGL ES 3.1 & Vulkan 1.2 |
| RAM | 2GB/4GB/8GB/16GB LPDDR4-4267 SDRAM (Optional) |
| Storage | 16GB/32GB/64GB eMMC flash (Optional) |
| Storage Expansion | Micro SD card slot (for user data storage) |
| Storage Expansion | M.2 NVMe SSD slot (supports 128GB/256GB/512GB optional) |
| Operating System | Raspberry Pi OS (Desktop/Lite) 32-bit and 64-bit |
| Front Panel I/O | |
| Power Interface | 1 x DC input, 2-Pin 3.5mm pitch terminal block (VIN+/GND), supports 9V~36V input. |
| Audio Interface (Optional) | 1 x Audio input/stereo output, 3.5mm audio jack. Switches to headphone output when headphones are plugged in, otherwise outputs to speaker. (Note: Only ED-IPC3120 includes this interface) |
| RS485/232 Interface | 12-Pin 3.5mm pitch terminal block with isolation, ESD, and surge protection. Configurable for different numbers of RS232 and RS485 ports. RS232 signal definition: IGND/TX/RX. RS485 signal definition: IGND/A/B. Models: ED-IPC3110 (2x RS485 + 2x RS232), ED-IPC3120 (2x RS485 + 2x RS232), ED-IPC3130 (3x RS485 + 1x RS232), ED-IPC3140 (4x RS485). |
| 1000M Ethernet | 1x 10/100/1000M adaptive Ethernet port, RJ45 connector. |
| 100M Ethernet | 1x 10/100M adaptive Ethernet port, RJ45 connector. |
| Rear Panel I/O | |
| SD Card Slot | 1 x Micro SD card slot for user data storage. |
| SIM Card Slot | 1 x Nano SIM card slot for 4G module. |
| Micro USB Interface | 1 x Micro USB for eMMC flashing. |
| Side Panel I/O | |
| HDMI Interface | 1 x HDMI Type-A, HDMI 2.0 standard, supports 4K 60Hz resolution. |
| USB Interface | 2 x USB 2.0 Type-A ports, each supporting up to 480Mbps. |
| Antenna Interface | 2 x SMA connectors (optional) for 4G and Wi-Fi/BT antennas. |
| Keys and Indicators | |
| RESET Key | 1 x Reset button for device reset. |
| PWR Indicator | Red indicator for power status. |
| 4G Indicator | Green indicator for 4G signal status. |
| ACT Indicator | Green indicator for system status. |
| USER Indicator | Green indicator, user-configurable status. |
| COM1-COM4 Indicators | Green indicators for serial port communication status. |
| Internal I/O | |
| 40-Pin GPIO | 1 x GPIO Pin Header (2x20-Pin 2.54mm pitch) for CM4 GPIO. Pin definitions: GPIO1-GPIO27/3V3/5V2/GND, compatible with expansion modules. |
| M.2 B | 1 x M.2 B Key connector for external SSDs (M.2 B 2230 and M.2 B 2242). |
Extended Functions
- EEPROM: 4K Byte storage for system usability.
- Encryption Chip: For upper-layer applications and system security.
- RTC: Integrated supercapacitor backup power for system clock. RTC battery holder available for CR1220 battery backup.
- Buzzer: Configurable for alerts or exceptions.
- Watch Dog: Hardware Watch Dog pre-provisioned, requires software support (under development).
Electrical Parameters
- Input Voltage: 9V ~ 36V DC
- Max Power Consumption: 24W
Mechanical Parameters
- Dimensions: 143mm x 100mm x 35mm (Length x Width x Height, excluding rail and antennas)
- Weight: 750g
- Mounting: DIN rail mounting
Wireless Specifications
Wi-Fi/Bluetooth (Optional)
- Supports 2.4GHz & 5GHz dual-band Wi-Fi and Bluetooth 5.0.
- 2.4GHz Wi-Fi: IEEE 802.11 b/g/n
- 5GHz Wi-Fi: IEEE 802.11 a/n/ac
- Bluetooth: 2402MHz ~ 2480MHz frequency band.
4G LTE (Optional)
Connects via Mini PCIe interface to various 4G LTE modules:
- EC20-CE Module (China/India):
- LTE FDD: B1/B3
- LTE TDD: B38/B39/B40/B41
- TDSCDMA: B34/B39
- WCDMA: B1
- CDMA 1x/EVDO: BC0
- GSM: 900/1800MHz
- GPS/GLONASS/BDS/Galileo/QZSS (Optional)
- EC25-AFX Module (North America):
- LTE-FDD: B2/B4/B5/B12/B13/B14/B66/B71
- LTE-TDD: (Not specified)
- WCDMA: B2/B4/B5
- GSM/EDGE
- GPS/GLONASS/BDS/Galileo/QZSS
- EC25-AUX Module (Latin America/Australia/New Zealand):
- LTE-FDD: B1/B2/B3/B4/B5/B7/B8/B28
- LTE-TDD: B40
- EC25-EUX Module (Europe/Middle East/Africa/Thailand):
- LTE-FDD: B1/B3/B7/B8/B20/B28A
- LTE-TDD: B38/B40/B41
- WCDMA: B1/B8
- GSM/EDGE: B3/B8
- GPS/GLONASS/BDS/Galileo/QZSS
- EC25-EFA Module (Europe/Middle East/Africa/South-East Asia):
- LTE-FDD: B1/B3/B7/B8/B20/B28
- LTE-TDD: B38/B40/B41
- WCDMA: B1/B5/B8
- GSM/EDGE: B3/B8
- GPS/GLONASS/BDS/Galileo/QZSS
Environmental Parameters & Regulations
- Operating Temperature: -25℃ ~ 60℃
- Storage Temperature: -25℃ ~ 60℃
- Operating Humidity: 5% ~ 95% (non-condensing)
System Block Diagram
The system architecture is centered around the Raspberry Pi CM5 module. It integrates LPDDR4 RAM and eMMC storage. Connectivity includes Gigabit and Fast Ethernet ports, multiple RS232/485 serial ports, USB 2.0 ports, an HDMI output, a Micro SD card slot, and a SIM card slot for optional 4G modules. Wireless capabilities are provided by integrated Wi-Fi and Bluetooth, with optional 4G LTE modules connecting via Mini PCIe. The system also supports optional supercapacitor backup for RTC and an EEPROM for enhanced usability. Power is supplied via a 9-36V DC input.
Product Dimensions
The ED-IPC3100 has a compact form factor with approximate dimensions of 143mm (length) x 100mm (width) x 35mm (height), excluding antennas and rail mounting clips. Ports are strategically placed on the front, rear, and side panels for accessibility. The unit is designed for easy installation on standard DIN rails.
Ordering Information
The ED-IPC3100 series offers various configurations. The part number structure is typically ED-IPC31xx-xxxx-xxxx-S, where:
- IPC Variant: ED-IPC3110 (2x RS485, 2x RS232), ED-IPC3120 (2x RS485, 2x RS232, Audio, Speaker, CSI, FPC DSI, FPC HDMI), ED-IPC3130 (3x RS485, 1x RS232), ED-IPC3140 (4x RS485).
- Wi-Fi/BT: '0' for without, '1' for with.
- Super Capacitor: Blank for without, 'S' for with.
- 4G/LTE Module: Blank for without, '4CN' (EC20-CE China/India), '4CNG' (EC20-CE China/India + GNSS), '4US' (EC25-AFX US + GNSS), '4EU' (EC25-EUX EU + GNSS), '4AU' (EC25-AUX AU + GNSS), '4EF' (EC25-EFA SE Asia + GNSS).
- DDR RAM: '02' (2GB), '04' (4GB), '08' (8GB), '16' (16GB).
- eMMC Storage: '16' (16GB), '32' (32GB), '64' (64GB).
Example Part Number: ED-IPC3110-10216-4CN-S signifies an Industrial Computer based on Raspberry Pi CM5, with Wi-Fi & Bluetooth, 4G LTE (EC20-CE Module), 2GB DDR, 16GB eMMC, 2x RS485, 2x RS232, and Super Capacitor Module.
Optional Accessories
Compatible power adapters are available:
- ED-PSU1202-UK-3.5PL: 100~240VAC to 12VDC/2A Adapter with UK AC plug.
- ED-PSU1202-US-3.5PL: 100~240VAC to 12VDC/2A Adapter with US AC plug.
- ED-PSU1202-AU-3.5PL: 100~240VAC to 12VDC/2A Adapter with AU AC plug.
- ED-PSU1202-EU-3.5PL: 100~240VAC to 12VDC/2A Adapter with EU AC plug.
Note: Each adapter model includes one specific regional AC plug (UK, US, AU, or EU).
Package Contents
- 1 x ED-IPC3100 Main Unit
- [Optional Wi-Fi/BT]: 1 x 2.4GHz/5GHz Wi-Fi/BT Antenna
- [Optional 4G]: 1 x 4G/LTE Antenna
For sales and support, please contact EDA Technology Co., Ltd via email at sales@edatec.cn or support@edatec.cn, or visit their website at www.edatec.cn. Phone: +86-15921483028 (China) | +86-18217351262 (Overseas).
