Litetronics Elbow with 1 Pin for Pluggable Sensor

What Comes in the Box

• Elbow
• Installation Instructions

Safety Instructions and Warnings

• When using electrical equipment, basic safety precautions should always be observed.
• This product must be installed in accordance with the applicable installation code by a person familiar with the construction and operation of the product and the hazards involved.
• Installation should only be conducted by a qualified electrician in accordance with NEC and any relevant local building codes.
• Be certain electrical power is OFF before and during installation and maintenance.
• To prevent wiring damage or abrasion, do not expose wiring to edges of sheet metal or sharp objects.

Wiring Instructions

Installing the elbow onto flood lights, 2-in-1 traditional or full cutoff and slim wall packs is quick and simple.

1. Before installation, always turn off the power supply form main circuit breaker first!
2. Unscrew and remove the sensor port plug.
3. Plug elbow into port on corresponding fixture and gently screw in to socket.
4. Install compatible sensors:
   • SC005
   • SC006
   • SC008
   • SC011
   Refer to sensor installation instructions for further details.
5. Restore power.

Compatible Products

2-In-1 Traditional or Full Cutoff Wall Packs

WPC060, WPC100

Slim Wall Packs

WPT060, WPT120

LED Flood Light

FL1501

Elbow Install Examples

Description: Visual examples showing how to connect the Litetronics elbow to various fixtures. The elbow allows for adjustment of the angle as needed for application.

Example 1: Connecting to 2-In-1 Traditional or Full Cutoff Wall Packs (WPC060, WPC100).

Example 2: Connecting to Slim Wall Packs (WPT060, WPT120).

Example 3: Connecting to LED Flood Light (FL1501).

Note: Adjust elbow angle as needed for application.

Dimensions/Size

Unit: mm

Overall Height: 62 mm

Main Body Diameter: Φ32 mm

Connection Thread Size: G1/2

Length of Main Body Section: 57 mm

Width of Main Body Section: 65.3 mm

Length of Top Section: 79.3 mm