Graphtec Wireless LAN Setup
Setting up your Wireless LAN is easy and accomplished in a few simple steps for the Graphtec CE8000 Series Cutter.
On-Screen Instructions
1 Select Language
Description of the language selection screen: A screen prompting the user to select a language from a list including English, Japanese (日本語), German (Deutsch), French (Francais), Italian (Italiano), Spanish (Espanol), Portuguese (Portugues), Russian (РУССКИЙ), Chinese (中文), and Korean (한글).
2 Select Unit of Measure
Description of the unit of measure selection screen: A screen allowing the user to choose between 'METRIC' and 'INCH' for length units.
3 Confirm Ready for Setup
Description of the confirmation screen: A prompt asking 'WIRELESS LAN AVAILABLE. WANT TO SET IT UP NOW?' with 'YES' and 'NO' options.
4 Select Wireless Network
Description of the network selection screen: A screen displaying available wireless networks, such as 'AccessPoint1', 'AccessPoint2', and 'AccessPoint3'. It indicates the current view is 'ACCESS POINT 1/3'.
5 Input Password
Description of the password input screen: A screen for entering the password for the selected wireless network ('AccessPoint1'), featuring a virtual keyboard layout with alphanumeric keys and special characters. The password field is masked with asterisks (******).
6 Connect to Wireless Network
Description of the connection confirmation screen: After entering the password, a prompt appears asking 'DO YOU WANT TO CONNECT TO THIS AP?' for 'AccessPoint1', with 'YES' and 'NO' options.
7 Assign Dynamic IP Address
Description of the IP address assignment screen: The screen displays network configuration details, including 'IP ADDRESS: 192.168. 0. 2', 'SUBNET MASK: 255.255.255.0', and 'GATEWAY: 192.168. 0.254', with 'DHCP: OFF' indicated. Buttons for 'OK', 'MAC ADDR.', and 'CANCEL' are visible.
8 Switch to DHCP mode
Description of the DHCP mode switch screen: The screen shows network configuration with 'DHCP: ON'. Instructions guide the user to 'Turn DHCP (ON) and then click OK'. A critical note states: 'THIS STEP IS VERY IMPORTANT: A Dynamic IP address protocol is set and your cutter will automatically reinitialize.'
9 Confirmation of Connection
Description of the connection confirmation: After restarting, the cutter's display will show a 'WIRELESS ICON' at the top right, indicating successful Wireless LAN setup and readiness for discovery on the local network. For more details, refer to Chapter 9.2 Connecting via Wireless LAN in the CE8000 User's Manual.
