LSC Smart Connect Outdoor Solar Spotlight Camera

Package Contents

The package includes:

• Solar panel
• Camera unit
• Mounting hardware (screws, wall plugs)
• USB-C cable
• Mounting bracket
• Tools for installation

Product Description

The LSC Smart Connect Outdoor Solar Spotlight Camera features:

1. Light sensor
2. Camera lens
3. Indicator light (Red solid: charging via USB-C; Blinking red: awaiting WiFi; Blue solid: running correctly; Blinking blue: connecting)
4. Microphone
5. LED Spotlight
6. PIR Sensor
7. Built-in speaker
8. Micro USB port (for charging)
9. Micro SD card slot (supports up to 128GB, not included)
10. Reset button
11. ON/OFF button

Getting Started

Before adding the LSC Smart Connect product, ensure you have your WiFi network name and password ready. Note that this product operates on a 2.4GHz WiFi network only. If you encounter issues, you may need to adjust your router's WiFi frequency to 2.4GHz. Consult your internet provider for assistance.

Step 1: Charge the Camera

Charge the camera using the provided USB-C cable. A 5V/1.5A power adapter is recommended (adapter not included).

Step 2: Add the Camera to the App

1. Download the LSC Smart Connect app from the Google Play Store or Apple Store, or scan the QR code provided.
2. Open the app. If this is your first time using the app, follow the on-screen instructions to create an account.
3. Turn on the device. The indicator light will blink, indicating it is in pairing mode.
4. In the app, tap the '+' icon or 'Add Device', then select the camera from the product list. Confirm the indicator light is blinking.
5. Enter your WiFi password and tap 'Confirm'.
6. Scan the QR code displayed in the app using the camera of the device. Hold the QR code steady at 10-15 cm in front of the camera.
7. When the device makes a sound, follow the on-screen instructions to complete the setup. The setup process will be automatic.

For more information, visit: www.lsc-smartconnect.com

Step 3: Reset the Product (if necessary)

If needed, locate the reset button and press it for approximately 3 seconds until you hear a sound. The blue indicator LED will start blinking. Then, proceed with Step 2.

Solar Panel Installation

Place the solar panel in an area that receives direct sunlight throughout the year. Angle the panel upwards at 30°. A few hours of direct sunlight daily are sufficient to keep the camera powered. Factors like weather conditions, seasonal changes, and geographic location can affect the energy production.

After installation, ensure all locking mechanisms are securely fastened. The separate USB-C cable can also be used to charge the batteries.

Maintenance

Regularly wipe the surface of the solar panel with a soft, damp cloth to remove any dust or debris.

Basic Parameters

• Operating voltage: 5V DC
• Operating temperature: -20.5°C to 48.5°C
• Cable length: 3m