Yamaha Speaker System VXL1B-16P
Overview
Dante PoE powered speaker with 16 x 1.5" drivers.
Features
- 1.5 inch (3.75 cm) full-range speaker units with neodymium magnets
- Slim design complements any interior décor
- Available in black or white
- Enclosures can be painted to match surroundings
- Wall mount bracket supplied
- Optional hardware for a wide range of installation needs
Specifications
| General Specifications | |
|---|---|
| Speaker Type | Full-range, powered speaker, bass reflex |
| Frequency Range (-10dB) | 80Hz – 20kHz*1 |
| Nominal Coverage | H: 170° |
| V: 25° (+12.5° – -12.5°) | |
| Effective Coverage (-10dB) | H: 180° |
| V: 30° (+15° – -15°) | |
| Components (LF-HF) | 1.5" (3.75cm) Cone x 16 |
| Maximum Output Level (1m; on axis) | 102 dB SPL (when using PoE+(IEEE 802.3at))*2 |
| Power Rating | Dynamic: 15W (PoE+ (IEEE 802.3at)), 6W (PoE (IEEE 802.3 af)) |
| Continuous: 15W (PoE+ (IEEE 802.3at)), 6W (PoE (IEEE 802.3 af)) | |
| I/O Connectors | RJ-45 (Dante) x 1 |
| Protection Circuit | Clip limiting, Integral power protection |
| Speaker Processing | Over current protection, Over temperature protection, Under voltage lock out, DC detection, Clock detection |
| Amplifier Protection | Over load protection, Over voltage protection, Under voltage lock out |
| Cooling | Natural convection |
| Power Requirements | PoE+(IEEE 802.3at), PoE(IEEE 802.3af) |
| Power Consumption | Idle: 3W, 1/8(Pink Noise): 6W (PoE+(IEEE 802.3at)), 4.3W (PoE(IEEE 802.3af)) |
| Finish | VXL1B-16P: Black painting (approximate value: Munsell N3.0) |
| Magnetic Shielding | No |
| Dust and Water Resistant | No |
| Accessories | Mounting bracket x 2, Bracket base x 2, Safety wire x 1, Machine screws (M5x10) x 2, Template x 1, Owner's manual |
| Options | WMB-L1B (W), HCB-L1B, PA-L1B |
| Packaging | Packaged in 1 pc |
| Dimensions (W x H x D) | 54mm x 1120mm x 104mm (2.1" x 44.1" x 4.1") (Speaker only) |
| Weight | 5.0kg (11.0lbs) (Speaker only) |
*1: Half-space (2π)
*2: Measured peak SPL with IEC noise at 2m; value converted to 1m is shown (frequency range: 100 Hz – 10 kHz)
Dimensions and Mounting
The loudspeaker unit has the following dimensions (excluding mounting hardware): Width: 54 mm (2.1 inches), Height: 1120 mm (44.1 inches), Depth: 104 mm (4.1 inches). Mounting points are indicated along the height of the unit, with 8 x M5 screw holes.
The supplied mounting bracket is designed for wall mounting. Diagrams show bracket dimensions and hole patterns, including sizes like 42.4 mm (1.7 inches) and 3.2 mm (0.1 inches), with hole diameters of ⌀5.5 and ⌀3.2.
The bracket base provides attachment points, with dimensions such as 46.5 mm (1.8 inches) and 33.1 mm (1.3 inches), featuring 2 x ⌀5.5 holes.
Optional Hardware
- WMB-L1B / WMB-L1W: Wall Mount Bracket
- HCB-L1B: Horizontal Coupling Bracket
- PA-L1B: Pole Mount Bracket
Software Control
- ProVisionaire Touch
- ProVisionaire Control
Architectural and Engineering Specifications
The Yamaha VXL1B-16P and VXL1W-16P are designed as loudspeakers for conference rooms and similar environments. They are full-range, bass-reflex, powered units featuring sixteen 1.5" cone drivers. The continuous power rating is 15 watts when using PoE+ (IEEE 802.3at) power, or 6W when using PoE (IEEE 802.3af) power.
Performance criteria include a reproduction frequency range of 80 Hz to 20 kHz (-10 dB) and a maximum output SPL of 102 dB (peak, IEC noise @ 1m, using PoE+). Coverage angles are 170° horizontal and 25° vertical (+12.5° ~ -12.5°). Built-in protection is included for speaker processing, amplifier, and power supply.
Audio and power input is received via a single Ethernet network connection, utilizing Dante digital audio network and Power over Ethernet (PoE injector or PoE network switch). DIP switches on the rear panel allow for network UNIT ID, IP address, and startup mode selection. A front panel power indicator LED shows power status, with network SYNC and LINK/ACT indicator LEDs near the Dante/NETWORK port.
The loudspeaker enclosure is constructed of extruded aluminum with ABS top and bottom boards, and features a perforated aluminum grille. Available in black (VXL1B-16P) and white (VXL1W-16P), the enclosures can be painted to match surroundings.
The loudspeakers are powered by Power over Ethernet (PoE+ or PoE) and are designed for wall-mounting. Basic mounting hardware (mounting bracket x 2, bracket base x 2, safety wire x 1, M5x10 machine screws x 2, template x 1) is supplied. Additional mounting hardware is available separately.
Dimensions (excluding mounting hardware): 54 (2.1) x 1120 (44.1) x 104 (4.1) mm (inch). Weight: 5.0 kg (11.0lbs).
*All information subject to change without notice. All trademarks and registered trademarks are property of their respective owners. Created in November, 2018.
For more information, visit: www.yamaha.com/proaudio/
