Innokin ZENITH NEX Tank Quick Guide
Components
The Innokin ZENITH NEX tank consists of the following parts:
- Mouthpiece
- Top Cap
- Side Fill Port
- Airflow
- Replaceable Glass Tube
- Coil
- Base
- 510 Thread
Adjusting the Airflow: Rotate the top cap to adjust the airflow for your preferred draw.
Filling the Tank
To fill the tank, rotate the top cap to reveal the side fill port. Pull out the black silicone plug to add E-liquid. After filling, push the silicone plug firmly back into place.
Important Notes:
- Wait at least five minutes after filling to allow a new coil to saturate with E-liquid.
- You can manually prime a new coil by placing three drops of E-liquid into the coil. Do not repeat this process, as it may oversaturate the coil.
- Ensure the tank does not run completely empty of E-liquid. Refill it regularly to avoid dry hits or coil damage.
Changing the Coil
It is time to change the coil when you experience a burnt taste or a decrease in flavour and/or vapour production.
- Unscrew the tank base and remove the old coil.
- Prime and install a new coil in its place.
- Ensure the coil notches align with the tank notches.
- Screw the tank base back into place.
Specifications
| Dimensions | Φ26 x 50.2 mm |
| Capacity | 5mL |
| Coils & Recommended Wattage |
|
Manufacturer Information
Manufacturer: Shenzhen Innokin Technology Co., Ltd.
Address: 1st-5th Floor, Building 6, Xinxintian Industrial Park, Xinsha Road, Shaer Community, Shajing, Baoan District, 518104, Shenzhen, China.
Telephone: +86 755 29898770
Email: info@innokin.com
Website: www.innokin.com
Support: support@innokin.com
European Representative: FRANCE VAPOTAGE DISTRIBUTION
Address: 68 rue d'ennevelin 59710 Avelin France
Telephone: +33 320020152
Email: Contact@innokin.fr
Social Media:
