Product Overview
The nVent HOFFMAN Wall-Mount Enclosures and Accessories, Continuous Hinge with Clamps, Type 4X, are designed for use in indoor and outdoor corrosive environments requiring a water-tight seal. These enclosures feature seamless foam-in-place gaskets and screw-down clamps to provide a secure seal against contaminants.
Industry Standards
- UL 508A Listed; Type 3R, 4, 4X, 12; File No. E61997
- cUL Listed per CSA C22.2 No 94; Type 3R, 4, 4X, 12; File No. E61997
- NEMA/EEMAC Type 3, 3R, 4, 4X, 12, 13
- IEC 60529, IP66
- Meets NEMA Type 3RX requirements
Specifications
- 14 gauge Type 304 or Type 316L stainless steel bodies and doors
- Seams continuously welded and ground smooth
- Seamless foam-in-place gasket
- Rolled lip around three sides of door
- Stainless steel door clamp assembly
- Hasp and staple for padlocking ?
- Door removed by pulling stainless steel continuous hinge pin
- Data pocket is high-impact thermoplastic
- Collar studs provided for mounting optional panels
- Exterior hardware on Type 316L stainless steel enclosures matches enclosure material
- Bonding provision on door; grounding stud on body
- Type 4X and offshore models use Stainless Steel 316L
Available Accessories
- Fast-Operating Clamp Assembly
- Panels for Type 3R, 4, 4X, 12 and 13 Enclosures
- Junction Box and Wall-Mount Enclosure Swing Out Panel Kit
- Steel and Stainless Steel Window Kits
- H2OMIT Vent Drains, Type 4X
- H2OMIT Thermoelectric Dehumidifier
Modification and Customization
nVent HOFFMAN offers modification and customization services for products to meet specific requirements. For detailed information, please contact your local nVent HOFFMAN sales office or distributor.
Bulletin: A4S
Standard Product Specifications
The following table details the standard product offerings for the continuous hinge wall-mount enclosures. It includes a wide range of sizes and material options. Key specifications covered are:
- Catalog Number: Unique identifier for each model.
- Article Number: Internal article number.
- Dimensions: Height, Width, and Depth in millimeters.
- Material: Type 304 or Type 316L Stainless Steel.
- Thickness: Material thickness in millimeters.
- Panel Size: Dimensions of the internal panel.
- Steel Panel: Type of internal steel panel.
- Data Pocket: Size of the data pocket (Small or Large).
- Conductive Steel Panel: Availability of conductive panel.
- Stainless Steel Panel: Availability of stainless steel panel.
- Clamp Quantity: Number of clamps included.
Due to the extensive number of models, the full table is not displayed here. Please refer to the original document for a complete list. Below are a few example entries:
| Catalog Number | Height (mm) | Width (mm) | Depth (mm) | Material | Panel Size (mm) | Data Pocket | Clamp Quantity |
|---|---|---|---|---|---|---|---|
| A16H1206SSLP | 406 | 305 | 152 | Stainless Steel 304 | 330 x 229 | Small | 2 |
| A24H2406SSLP | 610 | 610 | 152 | Stainless Steel 304 | 533 x 533 | Small | 3 |
| A36H3008SSLP | 914 | 762 | 203 | Stainless Steel 304 | 838 x 686 | Large | 7 |
| A48H3612SSLP | 1219 | 914 | 305 | Stainless Steel 304 | 1143 x 838 | Large | 8 |
Optional composite and aluminum panels are available for most sizes and can be purchased separately.
Enclosure Diagram and Features
The enclosure features a continuous hinge design with clamp closures for secure sealing. Key dimensions and components are illustrated:
- Dimensions: The diagrams show overall dimensions and specific feature placements, with measurements provided in both inches and millimeters.
- Door Features: Includes a rolled lip, stainless steel door clamp assembly, and a hasp and staple for padlocking ?.
- Hinge: A continuous stainless steel hinge allows the door to be removed by pulling the hinge pin.
- Data Pocket: A removable, high-impact thermoplastic data pocket is included, available in small (6.00 x 6.00 in / 152mm x 152mm) and large (12.00 x 12.00 in / 305mm x 305mm) sizes.
- Sealing: A seamless foam-in-place gasket ensures a water-tight seal.
- Mounting: Collar studs are provided for mounting optional panels. Mounting brackets are also detailed.
- Grounding: Features a bonding provision on the door and a grounding stud on the body.
- Notes: Diagrams include specific notes regarding the omission of middle studs based on enclosure dimensions (e.g., if width B < 31.00 in / 787mm) and maximum spacing between door clamps (15.00 in / 382mm).
Popular Cooling Products
| Enclosure Depth (C Dimension) | Thermoelectric Controller |
|---|---|
| 6 in. (152 mm) | TE090624011 |
| 8 in. (203 mm) | TE162024011 |
| 10 in. (254 mm) | TE162024011 |
| 12 in. (305 mm) | TE162024011 |
| 16 in. (406 mm) | TE162024011 |
*Important: Visit tools.hoffmanonline.com/attachments to access the Cooling Selection Tool for determining the appropriate cooling solution.
Popular Accessories
| Enclosure Width (B Dimension) | Lights | Hole Seals | Window Kits |
|---|---|---|---|
| 12 in. (305 mm) | LEDPUCK | AS050SS | APWK53NFSS |
| 16 in. (406 mm) | LEDA2M35 | AS050SS | APWK53NFSS |
| 20 in. (508 mm) | LED24V15 | AS050SS | APWK53NFSS |
| 24 in. (610 mm) | LED24V15 | AS050SS | APWK53NFSS |
| 30 in. (762 mm) | LED24V15 | AS050SS | APWK53NFSS |
| 36 in. (914 mm) | LED24V15 | AS050SS | APWK53NFSS |
Our Powerful Portfolio of Brands
nVent's brands include:
- CADDY
- ERICO
- HOFFMAN
- ILSCO
- SCHROFF
- TRACHTE
