nvent HOFFMAN Vortex Cooler BP4640SS

Product Overview

This Vortex cooler, BP, is easy to install, has no moving parts, and is maintenance-free. In addition to cooling, it also reduces the relative humidity within the enclosure it is mounted on. This Vortex cooler is an ideal solution to prevent overheating within the enclosure.

Features

Description: Compact, reliable, and low-cost way to cool and purge enclosures. It produces cold air from compressed air, with no moving parts. The easy mounting through a standard electrical knockout makes this solution especially suitable to be installed even when the enclosures are already in the field. For a continuous Vortex operating, relative humidity inside the enclosure is maintained below 45%; no moisture condenses inside the enclosure (the enclosure must be sealed). Most TYPE 4 and 4X units include a silencer to minimize the noise. The coolers must be installed vertically to maintain the protection degree.

Material: Internal Vortex tube manufactured in stainless steel. External cover: BP TYPE 12 in plastic and aluminium, BP TYPE 4 in aluminium, and 4X in stainless steel.

Protection: Depending on type, up to IP66 | TYPE 4X.

Pack quantity: Vortex cooler with mounting accessories.

This reliable solution reduces the customer's labor cost due to the ease of installation.

It is recommended to install a thermostat, BPT, as well as an air distribution kit, BPA.

Pack quantity: Vortex cooler with mounting accessories.

Product Attributes

• Height: 185mm
• Width: 63mm
• Depth: 63mm
• Material: Stainless Steel
• Nominal Capacity Watts: 820W
• Protection Rating: IP66; NEMA Type 4X
• Finish: Brushed
• Airflow: 1133 l/min
• Noise Level: 78dB(A)
• Cooling Capacity: 820W
• Hole Diameter: 48mm min
• Air Connection Inlet: 1/4"
• Weight: 1kg

Additional Product Details

Cooling capacity is calculated with pressured air being 20 °C and having 7-bar pressure.

Silencer is not included with items BP4008, BP4015, BP4030, BP4040, BP4608, BP4608SS.

Low pressure relief valve is not included with item BP4008, BP4015, BP4030, BP4040.

? Important Notice (警告)

Only install and use nVent products according to nVent product instructions and training materials. Instructions can be obtained from www.nvent.com or your nVent customer service representative. Improper installation, misuse, abuse, or failure to fully comply with nVent instructions and warnings may result in product failure, property damage, severe personal injury, and/or death, and may void the warranty.

Our powerful portfolio of brands:

nvent, CADDY, ERICO, HOFFMAN, ILSCO, SCHROFF, TRACHTE