Anko LET'S PARTY NEON SIGN - BLUE
Model No.: TB23084BC
Keycode: 43584260
Product Description
A blue neon sign with the text "Let's Party". The sign is powered by an LED driver and is designed for indoor use.
Warnings
- This light chain is suitable for INDOOR USE ONLY.
- This product is NOT designed for permanent or long-term use.
- The LED driver MUST be installed INDOOR away from weather.
- Only operate this light chain with the LED driver, Model No. JT-DC4.5V3.6W-E4.
- Do not connect this light chain electrically to another light chain.
- Do not operate the product while it is in the packaging.
- DO NOT attempt to replace the non-replaceable bulbs in this light chain.
- Never allow any part of the set to come into contact with a source of heat or flame.
- Care must be taken to avoid damaging the cable or fittings.
- If any part of the light set or cable is damaged, the light set MUST be discarded.
- This product is for decoration only. Not to be used by children as a toy. Keep out of reach of children.
- Do not position this light chain where it will be exposed to extreme wet weather or submerged in water.
- Always switch off this light set or unplug an adaptor if unattended.
- DO NOT overload power sockets or extension leads.
- DO NOT pierce the cable when securing in place, bend or stand on the light chain, as this will damage the bulbs or wiring.
- Please refer to the packing or product rating label for product class, specifications and rating.
Adaptor Manual
Please use the equipment according to the rated voltage and current.
| Model No. | Input Rated | Output Rated | |||
|---|---|---|---|---|---|
| Voltage | Frequency | Current | Voltage | Power | |
| JT-DC4.5V3.6W-E4 | 220-240VAC | 50-60Hz | 0.10A Max | 4.5V DC | 3.6W |
- Do not open the cover of the equipment.
- For use with LED lighting equipment.
- The input and output voltage should be checked before use to ensure correct usage.
- This is the Class II product, only for indoor use.
- The product is not a toy, keep it where children cannot reach.
- The lamp controlgear does not rely upon the luminaire enclosure for protection against accidental contact with live parts.
- If applicable: an indication that the controlgear is suitable for operation with LED modules.
- Do-not-cover classification.
