IFM SI1010 Flow Monitor
Product Type: Flow Monitor
Model: SI1010 (replaced by SI5010)
Part Number: SID10ADBFPKG/US
Product Characteristics
- Type: Compact flow monitor for adapter
- Process Connection: Internal thread M18 x 1.5 for adapter
- Probe Length: 45 mm
- Response Time: Short
- Setting Range (Liquids): 3...300 cm/s
Application
- Application: Coolants / oils in machine tools
- Pressure Rating: 300 bar
- Medium Temperature (Liquids): -25...80 °C
- Medium Temperature (Gases): Not specified
Electrical Data
- Electrical Design: DC PNP
- Operating Voltage: 20...36 V DC
- Current Consumption: < 100 mA
- Reverse Polarity Protection: Yes
- Outputs: Normally open / closed programmable
- Current Rating: 400 mA
- Voltage Drop: < 2.5 V
- Short-circuit Protection: Yes (non-latching)
- Overload Protection: Yes
Measuring / Setting Range
- Liquids Setting Range: 3...300 cm/s
- Liquids Greatest Sensitivity: 3...60 cm/s
- Gases Setting Range: Not specified
- Gases Greatest Sensitivity: Not specified
Accuracy / Deviations
- Max. Temperature Gradient of Medium: 300 K/min
Reaction Times
- Power-on Delay Time: 15 s (*)
- Response Time: 1...2 s (**)
Software / Programming
- Function: Adjustment of the switch point
Environment
- Ambient Temperature: -25...80 °C
- Protection: IP 67
Tests / Approvals
- Shock Resistance: 50 g (11 ms) [according to DIN IEC 68-2-27]
- Vibration Resistance: 20 g (55...2000 Hz) [according to DIN EN 60068-2-6]
- MTTF: 258 Years
Mechanical Data
- Process Connection: Internal thread M18 x 1.5 for adapter
- Materials (wetted parts): Stainless steel 316L / 1.4404; O-ring: FKM 8 x 1.5 gr 80 Shore A
- Housing Materials: PBT-GF 20
- Probe Length L: 45 mm
- Weight: 0.292 kg
Displays / Operating Elements
- Function Display: 10 LEDs, three-colour
- Operating Elements: Setting pushbuttons [2]
Electrical Connection
- Connection: M12 connector
Wiring
The wiring diagram shows a connection for the flow monitor. Pin 1 is connected to L+ (positive voltage supply). Pin 4 is connected to the programming wire (P), used for remote adjustment.
Wiring Diagram Description:
- Pin 1: L+ (Positive voltage supply)
- Pin 4: P (Programming wire for remote adjustment)
Remarks
- ¹): Complies with EN50178, SELV, PELV standards.
- *): Optically indicated.
- **): For a temperature gradient of 1 K/min.
Packaging
- Pack Quantity: 1 piece
Manufacturer Information
ifm efector, inc.
1100 Atwater Drive
Malvern, PA 19355
USA
Note: The company reserves the right to make technical alterations without prior notice.
