Olight Oclip Pro User Manual

In the Box

• Olight Oclip Pro Flashlight
• USB-C Charging Cable

Specifications

General:

• White Light (Floodlight): CCT: 5700~6500K, CRI: 70
• White Light (Spotlight): CCT: 5700~7000K, CRI: 70
• LEDs: 2xMAX 3.73W/LED (White), RED MAX 0.53W/LED
• Beam Distance: 120m (Spotlight)
• Max Output: 500 lumens (Floodlight Turbo) / 380 lumens (Spotlight Turbo)
• Waterproof: IPX6
• Drop Resistance: 1.5m
• Dimensions: (L)57mm x (W)28.05mm x (H)27.33mm / (L)2.24in x (W)1.1in x (H)1.08in
• Weight: 50g / 1.76oz (Including Battery)
• Battery: Rechargeable Li-ion Battery 580mAh 3.7V (2.146Wh)
• Working Temperature: 0-40°C

Note: Above data are tested per ANSI/PLATO FL 1-2019 standard in Olight's labs for reference.

Brightness Levels & Runtime:

Floodlight Mode:

Spotlight Mode:

Red Light Mode:

Charging

USB-C Charging Cable:

Battery Level Indicator (Figure 14): Rotate the selector when the light is off to check battery level.

• Green: 60% - 100%
• Orange: 30% - 60%
• Red: 1% - 30%

During charging, high output or above brightness levels are inactivated.

Charging Status Indicators:

• Red light blink: Charging (0% - 95%)
• Green light: Charging Completed (95% - 100%)

Product Overview

The Olight Oclip Pro features:

• Clip: For attaching to clothing or gear.
• Lanyard Hole: For attaching a lanyard.
• USB-C Charging Port: For recharging the battery.
• High Performance LED: The light source.
• On/Off Button: The primary control button.
• Battery Level Indicator: Integrated into the selector.

How to Operate

1. Lockout / Unlock (Figure 3)

When the light is off, press and hold the switch for about 2 seconds to enter Lockout mode. To unlock, hold the switch for over one second until the light turns on.

2. Light Switching with the Selector (Figure 4)

Rotate the selector to choose between the spotlight, floodlight, and red light modes.

• Rotate selector counterclockwise: Floodlight
• Rotate selector clockwise: Spotlight
• Selector position: Red light

3. Operations under Spotlight and Floodlight

3.1 On/Off (Figure 5)

Single press the switch to turn the light on or off. When turned off, the light will remember the last used brightness level (Moonlight, Low, Medium, High are memorized; Turbo is memorized as High; Strobe and White Beacon are not memorized. Spotlight and Floodlight modes share the memory.)

3.2 Moonlight Mode (Figure 6)

To activate Moonlight mode, press and hold the button for 1 second or more when the flashlight is off. If Moonlight mode was the last used mode, a simple press will activate it.

3.3 Turbo Mode (Figure 7)

Quickly double-press the button to enter Turbo mode.

3.4 Strobe Mode (Figure 8)

To turn Strobe on, quickly press the button three times or more when the light is off. Press or press and hold the button to turn off Strobe.

3.5 Change Brightness Level (Figure 9)

While the flashlight is on, press and hold the button to cycle through brightness levels: Moonlight, Low, Medium, High, and Turbo (if applicable).

3.6 Beacon Mode (Figure 10)

To turn Beacon mode on, quickly press the button three times or more when the light is on. Press or press and hold the button to turn off Beacon.

4. Operations under Red Light

4.1 On/Off (Figure 11)

Single press the switch to turn the red light on or off. When turned off, the current brightness level will be memorized (High output is not memorized).

4.2 High Output (Figure 12)

Quickly double-press the switch to turn on the high output red light.

4.3 Change Red Light Mode (Figure 13)

When the red light is constantly on, press and hold the switch for over 0.5 seconds for red blink mode. Press and hold again for over 0.5 seconds to switch to low output red light.

Safety Warnings

DANGER

• Do not disassemble the product.
• Do not throw the product into fire, as it may cause the battery to burn or explode, leading to unpredictable disasters.

CAUTION

• Do not look directly at the light source or shine it into eyes, as this may cause temporary blindness or permanent damage.
• Do not obstruct the lens, as the energy emitted may cause the object to burn.
• Do not place, charge, or use this light in a car where the temperature may exceed 60°C (140°F) or in similar environments.
• Do not immerse the product in water or other liquids, as it will cause damage.
• Do not place the light in a dusty environment, as dust may enter the switch and cause functional failure.
• The clip is magnetic; metal powder adsorbed on the surface can affect function. Clean it immediately.

NOTICE

• Please use only the provided USB-C charging cable to charge the product to avoid damage.
• Charge the product completely before storing it for a long period.
• If the product is carried or transported, please lock the product to prevent accidental activation.
• When the charging port is not in use, keep the dust cover closed to prevent dust or foreign objects from entering.
• The switch is a magnet-sensitive component; proximity to strong magnets may affect its functionality.
• Avoid activating Turbo mode repeatedly to prevent the surface from overheating.

REMARK

• Do not put a hot light into any type of fabric bag or fusible plastic container.
• This product is not a toy for pets.
• When the ambient temperature is below 0°C (32°F), the light can only output at low and medium brightness modes.
• When the temperature is below 0°C, the product will not charge, and the red light will flash rapidly.
• The light source of this luminaire is not replaceable; the entire luminaire shall be replaced when the light source reaches its end of life.

EXCLUSION CLAUSE

Olight is not liable for damages or injuries sustained resulting from the usage of the product inconsistent with the warnings in the manual, including but not limited to using the product inconsistent with the recommended lockout mode.

Battery Safety

• Do not ingest the battery; there is a Chemical Burn Hazard.
• If the battery is swallowed, it can cause severe internal burns in just 2 hours and may lead to death. Keep new and used batteries away from children.
• If the battery compartment does not close securely, stop using the product and keep it away from children.
• If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
• Do not replace the battery with an incorrect type that can defeat a safeguard, such as certain types of lithium batteries.
• Do not dispose of the battery in fire, a hot oven, or by crushing or cutting it, as it may result in an explosion.
• Avoid leaving the battery in extremely high-temperature environments, as it may cause an explosion or leakage of flammable liquid or gas.
• A battery exposed to extremely low air pressure may result in an explosion or leakage of flammable liquid or gas.

Caution: Do not stare at the operating light source.

Compliance Information

WEEE Disposal and Recycling

Products bearing the WEEE symbol are waste electrical and electronic equipment. They should not be mixed with unsorted household waste. Dispose of your waste equipment at a designated collection point for WEEE recycling, appointed by the government or local authorities. Proper disposal and recycling help prevent potential negative consequences to the environment and human health. Please contact local authorities for more information.

[Recycling symbol description: "Les ampoules et batterie recyclent."]

FCC Compliance Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

ISED Notice (Canada)

This device complies with Industry Canada’s ICES standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

French translation: Cet appareil est conforme aux normes ICES d’industrie Canada. L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est susceptible d'en compromettre le fonctionnement.

This Class B digital apparatus complies with Canadian ICES-005. / Cet appareil numérique de la classe B est conforme à la norme NMB-005 du Canada.

EU Declaration of Conformity

Dongguan Olight E-Commerce Technology Co., Ltd declares that the equipment [Oclip Pro] is in compliance with Directive 2014/30/EU and RoHS Directive 2011/65/EU & (EU) 2015/863. The full text of the EU declaration of conformity is available at: https://www.olight.com/download

Warranty Information

Olight offers a lifetime warranty in Australia, China, France, Germany, and the USA. Coverage is expanding to more countries with 2 or 5-year warranties. The warranty covers defects in material and workmanship under normal use, excluding loss, theft, deliberate damage, or cosmetic damage.

For complete warranty information, please visit Olight.com or your local Olight official website.

Customer Support:

• Australia: contact@olightstore.com.au
• Austria: kontakt@olightstore.at
• Canada: cs@olightstore.ca
• China: Wechat: olightcs
• France: cs@olightstore.fr
• Germany: kontakt@olightstore.de
• Italy: contatto@olightstore.it
• Japan: cs@olightstore.jp
• Korea: olightkorea@olight.com
• Spain: contacto@olightstore.es
• Thailand: cs@olightstore.co.th
• UK: contact@olightstore.uk
• USA: cs@olightstore.com
• For other countries and regions, please contact Global Customer Support: contact@olight.com

Manufacturer Information

Dongguan Olight E-Commerce Technology Co., Ltd

4th Floor, Building 4, Kegu Industrial Park, No. 6 Zhongnan Road, Chang'an Town, Dongguan City, Guangdong, China.

Made in China

Model Number/Identifier: 3.4000.1022

Date of Manufacture/Revision: A. 05, 08, 2024

Thank You

Thank you for choosing Olight!