Olight Diffuse Compact Flashlight User Manual
This manual provides detailed instructions for the Olight Diffuse, a compact and versatile flashlight designed for various lighting needs.
Product Specifications
Table 1: Flashlight Specifications
Feature | Specification |
---|---|
Light Source | COOL WHITE |
Color Temperature (CCT) | 5700~6700K |
Color Rendering Index (CRI) | 70 |
Max Output | 700 lumens (Turbo) |
Runtime | Up to 180 hours (Moonlight) |
Beam Distance | 80m |
Candela | 1700cd |
Waterproof | IPX8 |
Impact Resistance | 1.5m |
Dimensions | (L)87mm*(D)19mm / (L)3.43in*(D)0.75in |
Weight | 57.5g / 2.03oz (Including Battery) |
Working Temperature | 0-40°C |
Charging Time | Approx. 3.5h |
Table 2: Batteries Compatible
- 1x Customized Lithium Battery (included)
- 1x AA Battery (compatible: Alkaline, NiMH, NiCd, Lithium Iron)
Note: Above data are tested per ANSI/NEMA FL 1-2009 standard in Olight's labs. Runtime may vary depending on external temperature and ventilation conditions.
Operating Instructions
Refer to the figures for visual guidance.
- Step 1: Prepare the Flashlight
Remove the insulating film from the battery before first use. (See Figure 1)
- Step 2: Install the Battery
Install the battery correctly into the flashlight body. (See Figure 2)
- Step 3: Charging
Connect the USB charging cable to charge the flashlight. The indicator light is RED while charging and turns GREEN when charging is complete. (See Figure 3)
- Step 4: Power On/Off
To turn the flashlight ON or OFF, press the power button. (See Figure 4)
- Step 5: Lockout / Unlock
To prevent accidental activation, press and hold the power button for more than 1 second to lock the flashlight. Press and hold again for more than 1 second to unlock. (See Figure 5)
- Step 6: Moonlight Mode
From the OFF state, press and hold the power button for 1 to 2 seconds to activate Moonlight mode. (See Figure 6)
- Step 7: Turbo Mode
Double-press the power button to activate Turbo mode. (See Figure 7)
- Step 8: Strobe Mode
Triple-press the power button to activate Strobe mode. (See Figure 8)
- Step 9: Change Brightness Level
From the OFF state, press and hold the power button to cycle through brightness levels (Moonlight, Low, Medium, High). Release the button when the desired brightness is reached. (See Figure 9)
- Step 10: Battery Indicator
For Lithium Battery: The indicator light shows the battery status: RED (0-15%), ORANGE (15-60%), GREEN (60-100%). (See Figure 10-1)
For Other Batteries: Refer to Figure 10-2 for indicator information.
Safety Precautions
DANGER
- Do not leave the battery near fire or a heated source, or throw the battery into the fire.
- Do not step on, throw, or drop the battery on a hard floor to avoid mechanical impact.
CAUTION
- Do not look directly at the light source or shine into eyes, as it may cause temporary blindness or permanent eye damage.
- Do not install the included custom lithium battery on any other product, as it may cause damage.
- Do not use the rechargeable battery without a protection board.
- Do not put a hot light into any type of fabric bag or fusible plastic container.
- Do not store, charge, or use this light in a car or similar place where the interior temperature may exceed 60°C.
- Do not immerse the flashlight in seawater or other corrosive media, as it will damage the product.
- Do not disassemble the product.
NOTICE
- It is recommended to remove the battery if the flashlight is left unused for a long time.
- The included lanyard can be guided through the tail cap and then used to unscrew the tail cap for removing the battery.
- It is normal for the light to flicker when the battery is close to running out.
- In an environment with a temperature below 0°C, the flashlight can only output Low and Medium modes.
- When using dry batteries, the flashlight cannot enter Strobe mode.
REMARK
- Not a toy for pets.
Warranty Information
Within 30 days of purchase: Contact the original seller for repair or replacement.
Within 5 years of purchase: Contact Olight for repair or replacement.
Battery Warranty: Olight offers a one-year warranty for all rechargeable batteries.
For quality problems or damage to low-value fittings (like lanyards or clips) within 30 days of purchase under normal use, contact Olight's after-sale service. For issues occurring after 30 days or damage from abnormal use, conditional quality assurance may apply.
Company Information
Dongguan Olight E-Commerce Technology Co., Ltd
4th Floor, Building 4, Kegu Industrial Park, No 6 Zhongnan Road, Changan Town, Dongguan City, Guangdong, China.
Made in China
USA Customer Support: cs@olightstore.com
Global Customer Support: contact@olightworld.com
Visit www.olightworld.com to see the complete product line.