FJÄLLBO Shelving Unit
Important Safety Information
WARNING! Serious or fatal crushing injuries can occur from furniture tip over. To prevent tip over, this furniture must be used with the wall attachment device(s) provided.
Screw(s) and plug(s) for the wall are not included. Use screw(s) and plug(s) suitable for your walls. If you are uncertain, seek professional advice. Read and follow each step of the instruction carefully.
Assembly Steps
The following steps detail the assembly of the FJÄLLBO shelving unit. Ensure all parts are present before beginning.
Step 1: Lay out the base frame components on a flat surface. Attach the side panels to the base using the provided screws.
Step 2: Insert screws into the designated holes on the side panels and attach the first shelf support.
Step 3: Attach the second shelf support to the opposite side panel.
Step 4: Secure the shelf supports with screws.
Step 5: Slide the back panel into the grooves on the side panels.
Step 6: Attach the top frame to the side panels using screws.
Step 7: Secure the top frame with angle brackets and screws.
Step 8: Attach the remaining shelf supports.
Step 9: With assistance, carefully lift and position the assembled frame.
Step 10: Insert screws to secure the shelves.
Step 11: Attach the shelf supports to the frame using screws.
Step 12: Secure the shelves with screws.
Step 13: Slide the back panel into place.
Step 14: Attach the top panel using screws.
Step 15: Secure the top panel with angle brackets and screws.
Step 16: Rotate the unit to its upright position.
Step 17: Attach the remaining shelves using screws.
Step 18: Insert screws into the bottom of the unit.
Step 19: Assemble the drawer runners.
Step 20: Attach the drawer runners to the unit.
Step 21: Place the top of the unit onto the assembled frame.
Step 22: Secure the top of the unit with screws.
Step 23: Attach the final brackets to secure the top.
Step 24: Adjust the leveling feet at the bottom of the unit to ensure stability.
Step 25: Secure the unit to the wall using the provided wall attachment devices and appropriate screws and wall plugs for your wall type.
Parts List
- 6x Screw (122158)
- 6x Screw (139212)
- 30x Screw (107616)
- 24x Screw (152497)
- 12x Screw (152527)
- 12x Screw (152526)
- 4x Angle Bracket (152730)