Components for System Solutions: MCB Miniature Circuit Breaker
Model: 8530/1-MCB-STA103-C63-000-3
Article Number: 267213
Product Description
The R. STAHL 8530 series miniature circuit breakers (MCBs) are overcurrent protection devices offering excellent current limiting for short circuits and high switching capacity (10, 15, or 25 kA). They feature a low load on cables and high selectivity for upstream fuses. These components have a modular design, available in 1- to 4-pole versions, with rated currents from 0.5-63 A. The maximum installation capacity is 4.5 subunits.
Key Features:
- Isolation function in accordance with EN60947-2
- Energy limitation class 3
- Modular design for simple replacement and expansion
- Easy installation: snaps onto the mounting rail in Ex e enclosures
- Non-adjustable thermal and magnetic releases
- Ergonomically shaped operating lever for safe switching
- Padlocks (accessories) available for protection during maintenance
Technical Data
Explosion Protection
- Application range (zones): 1, 2
- Application range (Zone) note: For use in Zone 21/22 when protected by Ex tb/tc enclosure
- IECEx gas certificate: IECEx FMG 19.0029U
- IECEx gas explosion protection: Ex db eb IIC Gb
- ATEX gas certificate: FM19ATEX0191U
- ATEX gas explosion protection: II 2 G Ex db eb IIC Gb
- Certificates: ATEX (FM), Brazil (ULB), China (CQST), IECEx (FM)
- Declaration of conformity: Certificate of conformity (ATEX), China (CCC)
Electrical Data
- Rated operational voltage AC: 230/400 V
- Rated operational current: 63 A
- Frequency: 50/60 Hz
- Rated switching capacity: 10 kA
- Electrical service life: 104
- Mechanical service life: 2 x 104
- 1st auxiliary function: without
- 2nd auxiliary function: without
- Tripping characteristic: C
- No. of poles: 3-pole
Ambient Conditions
- Ambient temperature: -40 °C ... 70 °C (-40 °F ... 158 °F)
- Ambient temperature note: Deviating ambient temperatures based on current certificates available on request
Mechanical Data
- Degree of protection (IP) (IEC 60529): IP2X
- Enclosure material: Thermoplast
- Connection cross section min.: 1.5 mm²
- Connection cross-section max.: 25 mm²
- Connection cross-section AWG min.: 16 AWG
- Connection cross-section AWG max.: 4 AWG
- Connection cross-section 2 min.: 1.5 mm²
- Connection cross-section 2 max.: 10 mm²
- Connection cross-section 2 AWG min.: 16 AWG
- Connection cross-section 2 AWG max.: 8 AWG
- Min. tightening torque: 2 N·m
- Max. tightening torque: 3 N·m
- Connection cross-section note: 2-conductor connection (upper and lower chamber at the same time): upper and lower chamber max. 16/10 mm² (A maximum difference of one cross section may be clamped between the upper and lower chamber.)
Dimensions
- Width: 83 mm (3.27 in)
- Length: 165 mm (6.5 in)
- Mounting depth: 138.3 mm (5.44 in)
- Weight: 1.4 kg (3.087 lb)
Mounting / Installation
- Tightening torque: 2-3 N·m (17.7 to 26.6 lbf·in)
- Tightening torque auxiliary contact: 0.4-0.6 N·m (3.5 to 5.3 lbf·in)
Technical Drawings
Tripping Characteristic C:
A graph illustrates the tripping time in seconds versus the multiple of rated current for tripping characteristic C, showing curves for AC and DC, and indicating a cold state tripping curve.
Dimensional Drawings:
Diagrams show the overall dimensions of the MCB, including width, length, and mounting depth, with measurements provided in both millimeters and inches. A diagram also shows the 3-pole configuration without auxiliary contacts.
Accessories
-
4-way locking device
A lock-out/tag-out hasp for individually locking the component using up to four cylinder locks.
Art. No.: 227232 -
Cylinder lock
For closing (bracket Ø 3)
Art. No.: 107115 -
Fastening set
A fastening set for fastening the component on the mounting plate without a DIN rail.
Art. No.: 276618