Product Overview
This document provides assembly instructions for the IKEA SUNDVIK Children's Table. Please follow these steps carefully to ensure proper assembly and safe use of the product.
Important: Assembly requires basic tools. Ensure you have a clear workspace.
Tools Required
? Screwdriver (flathead) ? Screwdriver (Phillips) ? Adjustable Wrench
Parts List
| Item Number | Description | Quantity |
|---|---|---|
| 111451 | Threaded Rod | 4x |
| 109572 | Screw | 12x |
| 109049 | Screw | 16x |
| 100716 | Nut | 4x |
| 100829 | Washer | 4x |
| 110308 | Bracket | 4x |
| 121121 | Dowel/Pin | 4x |
Assembly Instructions
-
Step 1: Attach Brackets
Take 4x Brackets (110308). Attach them to the designated frame components using 4x Screws (109049) per bracket. Use a screwdriver to secure them into the pre-drilled holes.
Diagram shows a bracket being screwed onto a flat surface with two screws.
-
Step 2: Assemble Main Frame
Connect the main frame pieces. Attach the side frame components to the end frame components. Use Screws (109049) to join these parts together, forming a rectangular base structure.
Diagram shows two U-shaped frame parts being joined by screws to form a rectangle.
-
Step 3: Attach Support Rails
Secure the support rails or beams to the assembled frame. Use 12x Screws (109572) to fasten these rails from the outside into the frame edges.
Diagram shows long screws being inserted from the outside into the frame structure.
-
Step 4: Prepare Legs
For each of the four legs: Insert 4x Dowels/Pins (121121) into the top of the leg. Then, insert 4x Threaded Rods (111451) through the bottom of the leg assembly and screw them into the dowels/pins.
Diagram shows dowels being inserted into the top of a leg piece, and threaded rods being screwed from the bottom up into the leg assembly.
-
Step 5: Attach Legs to Frame
Align the threaded rods protruding from the top of each prepared leg with the corresponding holes in the main table frame. Secure each leg by placing a Washer (100829) onto the threaded rod, followed by a Nut (100716). Tighten the nuts using an adjustable wrench ?.
Diagram shows a leg being attached to the frame, with a washer and nut being tightened.
Assembly Complete!
Need help? If you encounter any issues or have questions, please contact IKEA customer support.
