KYRRE Stool
Assembly Instructions
Product Information
This document provides assembly instructions for the IKEA KYRRE stool.
Brand: IKEA
Model: KYRRE
Article Number: AA-2118871-4
Parts List
- 6x Screws (Part No. 130915)
- 1x Allen Key (Part No. 100092)
- 3x Plastic Caps (Part No. 112357)
Assembly Steps
Step 1: Attach Legs
Place the stool seat upside down on a soft surface (like a rug) to prevent scratches. Use the provided Allen key (100092) to screw the six legs into the designated holes on the underside of the seat. Ensure each leg is securely fastened.
Visual guidance:
- The process involves inserting screws and tightening them with the Allen key.
- [Icon: Warning] ❌ Avoid incorrect screw insertion; ensure the screw is aligned properly.
Step 2: Insert Caps
Once the legs are attached, insert the three plastic caps (112357) into the corresponding holes on the underside of the seat. Press them firmly until they are seated.
Visual guidance:
- [Icon: Insertion] ▶️ Push the plastic cap into the hole.
Assembly Tips & Warnings
- [Icon: Assembly Check] ✔️ Ensure parts are joined correctly.
- [Icon: Incorrect Assembly] ❌ Do not join parts incorrectly.
- [Icon: Guidance] ❓ If unsure about assembly, refer to the diagrams or seek assistance.
- [Icon: IKEA Tools] ?? Assemble using provided tools and instructions.
