Assembly Steps
Step 1: Prepare Base and Attach Legs
Place the circular base frame on a soft surface to prevent scratching. Attach the four legs to the base frame, ensuring they are oriented correctly. [Assemble on soft surface] ?
Step 2: Secure Legs to Base
Use 4 screws (Part ID: 10074074) and the Allen key (Part ID: 100092) to secure each leg to the base frame. Do not fully tighten the screws yet. [Use Allen key to tighten screw] ⚙️ ❌ Incorrect screw type
Step 3: Attach Upper Ring
Position the upper ring onto the legs. Insert 4 screws (Part ID: 10074074) into the designated holes on the upper ring and legs. [Insert screw] ❌ Incorrect screw type
Step 4: Tighten Upper Ring Screws
Use the Allen key (Part ID: 100092) to fully tighten the 4 screws securing the upper ring. [Use Allen key to tighten screw] ⚙️
Step 5: Insert Dowels/Caps
Insert 4 dowels/caps (Part ID: 194765) into the corresponding holes on the upper ring. [Insert dowels/caps] ?
Step 6: Place Lower Shelf
Carefully place the lower circular shelf onto the base frame, aligning it with the legs. [Place shelf]
Step 7: Attach Tabletop Supports
Peel the backing from the 4 tabletop support pieces (Part ID: 118578). Attach these supports to the top of the legs. [Peel backing] [Attach support]
Step 8: Place Glass Tabletop
Carefully place the glass tabletop onto the assembled base, ensuring it rests securely on the 4 support pieces. [Carefully place glass] ❌ Do not place glass incorrectly
