STORKLINTA 4-Drawer Chest Assembly Instructions
Safety Warnings
Furniture Tip-Over Hazard
WARNING: Children have died from furniture tip-over. To reduce the risk of furniture tip-over:
- ALWAYS install the anti-tip device provided.
- NEVER put a TV on this product.
- NEVER allow children to stand, climb, or hang on any drawers, doors, or shelves.
- NEVER open more than one drawer at a time.
- DO NOT defeat or remove the drawer interlock system; it is an important stability and safety system.
- Place heaviest items in the lowest drawers.
Product Overview
This document serves as a guide for assembling the STORKLINTA 4-Drawer Chest manufactured by IKEA. The assembly process is detailed through visual diagrams in the original document, requiring careful attention to part identification and step-by-step construction.
Key safety features include an essential anti-tip device that must be installed to prevent serious injury or death from furniture tip-over.
Assembly Guidance Summary
The assembly of the STORKLINTA 4-Drawer Chest involves multiple stages, typically including:
- Identifying and organizing all included parts and hardware.
- Constructing the main frame of the chest using panels, dowels, and screws.
- Assembling the drawers, including attaching drawer fronts, sides, and bottoms.
- Installing drawer runners onto the chest frame and the drawers themselves.
- Attaching the back panel.
- Securing the top panel.
The original document references numerous specific part numbers for components and hardware, such as screws (e.g., 109048, 100823, 101345, 118331, 146114, 120076, 105248, 102553, 10076617, 10094763, 10094727, 10093081, 10093082, 10101849, 158568, 119250, 119252, 10102026, 10040242, 145718, 111919225520, 111919225502) and dowels. Quantities for each item are specified for each assembly step.
Note: Detailed visual instructions are provided in the original PDF for each step of the assembly process.
Wall Mounting Instructions
Proper installation includes securing the chest to the wall using the provided anti-tip device to ensure stability and prevent tip-over accidents.
The document indicates that the supplied screws and plugs are designed for use with most solid (A) and hollow (B) walls. For solid wood (C) applications, screws should be used without plugs. If unsure about wall type or proper installation, it is recommended to seek advice from a qualified professional.
The process typically involves drilling holes into the wall, inserting appropriate wall anchors (plugs), and then fastening the furniture to the wall using the provided hardware.
