Lifetime Limited Warranty
The Hunter Fan Company makes the following limited warranty to the user or consumer purchaser of this Hunter ceiling fan:
If any part of your Hunter Ceiling fan motor fails during your lifetime due to a defect in material or workmanship we will provide a replacement part free of charge. If no replacement part can be provided for such Hunter Ceiling Fan motor, we will refund the actual purchase price of your fan. If your Hunter Ceiling Fan motor fails at any time within one year after the date of sale to you due to a defect in material or workmanship, labor to repair the defect will be provided free of charge at our nearest service center or our Service Department in Memphis, Tennessee. You will be responsible for labor costs after this one-year period. The foregoing limited warranty applies only to the motor itself, and does not apply to electronic controls such as remote controls, remote control receivers or transmitters used in conjunction with the motor. These electronic control items are included in the one year limited warranty below.
If any part of your Hunter Ceiling Fan other than the motor, glass globes, or light bulbs fail at any time within one year of the date of purchase due to a defect in material or workmanship, we will repair or, at our option, replace the defective part free of charge for parts and labor performed at our nearest service center or at our Service Department in Memphis, Tennessee.
IF THE USER OR CONSUMER PURCHASER CEASES TO OWN THE FAN, THIS WARRANTY AND ANY IMPLIED WARRANTY WHICH THEN REMAINS IN EFFECT, INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE VOIDED. NO WARRANTY, EXPRESSED OR IMPLIED, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, IS MADE IN RESPECT TO THE GLASS GLOBES OR LIGHT BULBS OR THE FINISH ON ANY METAL PORTION OF THE FAN.
THIS WARRANTY IS IN LIEU OF ALL OTHER EXPRESS WARRANTIES. THE DURATION OF ANY IMPLIED WARRANTY, INCLUDING, BUT NOT LIMITED TO ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, IN RESPECT TO ANY HUNTER FAN MOTOR OR OTHER FAN PART, IS EXPRESSLY LIMITED TO THE PERIOD OF THE EXPRESS WARRANTY SET FORTH ABOVE FOR SUCH MOTORS AND OTHER PARTS.
This warranty is voided if your Hunter Fan is not purchased and used in the USA. This warranty excludes and does not cover defects, malfunctions or failures of any Hunter Ceiling Fan which were caused by repairs by persons not authorized by Hunter Fan Company, by the use of parts or accessories not authorized by Hunter Fan Company, by mishandling, improper installation, modifications, or damage to the Hunter Ceiling Fan while in your possession, or unreasonable use, including failure to provide reasonable and necessary maintenance.
To obtain servicing, contact the nearest Hunter authorized service center or the Hunter Fan Company Service Department, 7130 Goodlett Farms Parkway, Suite 400, Memphis, Tennessee 38016. Please contact Hunter Fan Company before shipping your fan. If authorized to ship, you will be responsible for all insurance and freight or other transportation charges to the factory service center. Hunter Fan Company will return your Hunter Fan freight prepaid. Your ceiling fan should be properly packed to avoid damage in transit since Hunter Fan Company will not be responsible for any such damage. Proof of purchase is required when requesting warranty service. The purchaser must present sales receipt or other document that establishes proof of purchase.
IN NO EVENT SHALL HUNTER FAN COMPANY BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES.
SOME STATES DO NOT ALLOW LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY LASTS OR THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU.
THE WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.
Parts Guide
This section provides a visual and textual guide to all components of your Hunter Fairhaven ceiling fan, including pre-installed parts, optional accessories, and included accessories. Refer to the detailed parts list table for specific item numbers and descriptions.
Pre-installed Parts
These parts are typically found pre-assembled or pre-wired for convenience:
- Canopy (5)
- Ceiling Bracket (7)
- Downrod Assembly (11)
- Setscrew (13)
- Canopy Screw (18)
- Wood Screw 3" (20)
- Flat Washer (24)
- Mounting Isolator (26)
- Wire Connector (28)
- Hanger Pipe (30)
- Motor (main body of the fan)
- Blade Iron Armature Screw (104) - These screws are found in the motor's shipping blocks.
Optional Accessories
These parts are used only if removing the light kit from the fan:
- Switch Housing Cap Screw (57)
- Dummy Terminal, Male (68)
- Dummy Terminal, Female (69)
- Switch Housing Cap (71)
Included Accessories
These accessories are included with your fan for installation and balancing:
- Balancing Kit (140)
- Remote Control Receiver (106)
- Remote Control Transmitter (108)
- Remote Control Cradle (110)
Hardware Drawn to Scale
For your convenience, you may receive extra fasteners. This section illustrates the relative size of various hardware components.
Parts List Table
| # | Item Name | Qty. | Model # 53031 Part# | Model # 53032 Part# | Model # 53033 Part# |
|---|
| 1 | Hanging System Kit | 1 | K0065-01 | K0065-01 | K0065-01 |
| 5 | Ceiling Bracket | 1 | | | |
| 7 | Canopy | 1 | | | |
| 11 | Downrod Assembly | 1 | | | |
| 13 | Setscrew | 1 | | | |
| 18 | Canopy Screw | 3 | | | |
| 20 | Wood Screw 3" | 2 | | | |
| 24 | Flat Washer | 2 | | | |
| 26 | Mounting Isolator | 4 | | | |
| 28 | Wire Connector | 4 | | | |
| 30 | Hanger Pipe | 1 | | | |
| 50 | Hardware Kit | 1 | K0869-00-860 | K0869-00-861 | K0869-00-862 |
| 51 | Blade Assembly Screw | 16 | | | |
| 53 | Machine Screw 6-32 | 6 | | | |
| 57 | Switch Housing Cap Screw | 2 | | | |
| 63 | Blade Grommet | 16 | | | |
| 66 | Switch Housing Assembly | 1 | K0375-03 | K0375-03 | K0375-03 |
| 68 | Dummy Terminal, Male | 1 | 08198-01 | 08198-01 | 08198-01 |
| 69 | Dummy Terminal, Female | 1 | 08200-01 | 08200-01 | 08200-01 |
| 71 | Switch Housing Cap | 1 | K0538-01 | K0538-01 | K0538-01 |
| 76 | Light Kit Assembly | 1 | K0883-02 | K0883-02 | K0883-02 |
| 79 | Wire Harness (not shown) | 1 | K0165-11 | K0165-11 | K0165-11 |
| 80 | Globe/Shade | 1 | G2568-01-217 | G2568-01-176 | G2568-01-142 |
| 83 | Candelabra Bulb | 3 | 77646-08 | 77646-08 | 77646-08 |
| 88 | Globe Retainer | 1 | K0194-01 | K0194-01 | K0194-01 |
| 90 | Finial Cap | 1 | K1306-02 | K1306-02 | K1306-02 |
| 92 | Finial | 1 | 67787-02 | 67787-02 | 67787-02 |
| 96 | Blade Iron Set | 1 | K0156-05 | K0156-05 | K0156-05 |
| 98 | Blade Set | 1 | K0867-25-104 | K0867-25-105 | K0867-25-106 |
| 104 | Blade Iron Armature Screw | 11 | K0064-01 | K0064-01 | K0064-01 |
| 106 | Remote Control Receiver | 1 | K2431-01 | K2431-01 | K2431-01 |
| 108 | Remote Control Transmitter | 1 | K0474-02 | K0474-02 | K0474-02 |
| 110 | Remote Control Cradle | 1 | G2272-02 | G2272-02 | G2272-02 |
| 140 | Balancing Kit | 1 | K0118-01 | K0118-01 | K0118-01 |
