Disney Q10 TWS Bluetooth Earbuds User Manual
Product Information
Brand: Disney
Model: Q10 TWS Bluetooth Earbuds
Authorized by: Xiamen Microphone Information Technology Co., Ltd.
Manufacturer: Shenzhen Jihe Electronics Co., Ltd.
Manufacturer Address: 2nd Floor, Building 3, Pengdadi Industrial Zone, Xueli Road, Longxi Community, Longgang Street, Longgang District, Shenzhen
Product Overview
The Disney Q10 is a pair of TWS (True Wireless Stereo) Bluetooth earbuds featuring a slide cover design and HIFI sound quality with noise reduction capabilities.
Key Components:
- LED Light Zone
- Light Switch Key: Double-click to toggle light modes (monochromatic solid, monochromatic breath, seven-color cycle breath). Click to change light color (monochromatic solid, monochromatic breath).
- Charge Indicator Light
- Lanyard Ring
- Type-C Charging Port
- Touch Point
Specifications
- Bluetooth Version: V5.1
- Operating Voltage: 3.3V-4.2V
- Pairing Name: Q10
- Horn Size: 13mm
- Usage Duration: 4 hours
- Standby Time: 180 days
- Headphone Battery Capacity: 30mAh
- Charging Bay Battery Capacity: 300mAh
Instructions for Use
Bluetooth Pairing Instructions
- Take the two earphones out of the battery compartment one by one. The earphones will power on automatically.
- The headphone indicator will blink red/blue alternately. The left and right headphones will automatically pair within 5 seconds. After successful pairing, one headphone indicator will turn off, indicating it is ready for Bluetooth connection.
- Open the Bluetooth interface on your mobile phone, search for "Q10", and click "Pairing" to complete the connection.
Power On/Off
- Power On: Long press for 3 seconds. The indicator lights will flash red/blue alternately. After automatic pairing, one headset's indicator light will turn off. Both ear indicators will turn off after connecting to the phone.
- Power Off: Long press any headset for 5 seconds. The headset indicator light will turn on red for 1 second. If there is no Bluetooth connection within 3 minutes, the headset will automatically power off.
Indicator Description of the Charging Bay
- When charging the charging bay with a Type-C cable, the red light blinks and remains solid when fully charged.
- When the remaining battery power is lower than 10% (3.3V), the headset will prompt low battery every 30 seconds, and the indicator light will flash red once every 30 seconds. The headset will automatically shut off when the remaining battery power is lower than 3.0V.
Touch Control Operation
Function | Operation | Prompt Tone |
---|---|---|
Answer/Hang up | Click (during incoming call or call) | |
Reject | Long press left or right ear for 1 second (during incoming call) | |
Play/Pause | Click (while listening to music) | |
Switch Game/Music Dual Mode | Long press left ear for 2 seconds (long press until a beep, then release) | game mode / music mode |
Previous Song | Triple click left or right ear | |
Next Song | Double click on the left or right ear | |
Start Voice Assistant | Long press right ear for 2 seconds (long press until a beep, then release) |
Prompt Tones
- Power On: power on
- Power Off: power off
- TWS Pairing Successful: TWS connected
- Connection Successful: Connected
- Disconnect: Disconnected
- Incoming Call: Play the ringtone
- Low Battery Warning: low battery Please charge
- Switching Modes: Switching modes
Precautions for Use
- To ensure personal safety, do not wear or place the earphones too close to a pacemaker (less than 10CM). Do not insert the plug into an electrical outlet.
- Children should use this device under adult supervision. This product is not a toy.
- Using headphones at high volume, especially for extended periods, can cause hearing damage.
- High-pitched sounds may be emitted when operating the hi-fi switch or inserting the headset, which may affect hearing at high volume settings. Therefore, before switching audio sources or inserting headphones, set the volume control to the lowest level.
- For traffic safety, do not use headphones while driving or cycling.
Warning!
- Do not disassemble, bump, squeeze, or put the battery into fire. Do not expose the battery to conductive materials, liquids, fire, or high temperatures.
- Improper battery replacement may cause explosion. Do not replace the battery without authorization.
- Keep metal objects away from the battery terminals. Do not continue to use the battery if it bulges, leaks, discolors, smells, or shows any other abnormalities.
- Do not place the product in extremely low temperatures. Do not drop, vibrate strongly, or hit the product with hard objects to avoid damage. Do not use the battery after it has been submerged in water.
- Improper battery usage may lead to explosion or leakage, causing burns and other personal injuries. If a battery leaks, handle it with care and dispose of the battery immediately in accordance with local laws and regulations for battery disposal.