DISNEY SERIES BLUETOOTH HEADSETS
User Guide
Product Overview
This section details the components of the Disney Series Bluetooth Headsets.
- 1. Headset MFB key
- 2. Headphone indicator light
- 3. Earphone charging contact
- 4. Loudspeaker sound hole
- 5. Charging bin indicator
- 6. Type-C Charging port
Power On/Off
Power On: The earphones automatically power on when removed from the charging box lid. They enter group pairing state with indicator lights flashing. Manual power on is achieved by long-pressing the MFB touch key for approximately 3 seconds.
Shutdown: Placing the earphones into the charging compartment automatically shuts them down and disconnects them. Indicator lights flash three times and then go off.
Bluetooth Pairing
Initial Pairing: Open the charging chamber and take out the headset. The headset starts automatically. Ensure the mobile phone (or other connecting device) is within 50cm for optimal pairing.
Connection Process: Open the Bluetooth interface on your mobile phone. Search for the Bluetooth name "J01" and click "Pairing". Indicator lights will flash. After successful pairing, the left ear light turns off, and the right ear light flashes quickly. Once connected, the lights turn off, and a confirmation message like "Pairing successful" or "Successful" is issued.
Status Display Example: A visual representation shows "Settings", "MY DEVICES", "J01", "Connected", and an information icon [!].
LED Indication Status
Various LED states indicate the headset's operational status:
- Pairing status: White lights flash alternately.
- Voice switching status: White light flashing.
- Music status: No light.
- Earphone charging status: White light flashing.
- Earphone charging complete: White light is solid.
- Earbuds out of charging case: Headphones flash white.
- Headphone reset: Headphone white light is always on after a successful reset.
Product Operating Instructions (Controls)
This section outlines the control functions for the headsets.
| Action | Control |
|---|---|
| Boot | Open charging compartment or lift headphones (auto-on). Long press headset touch key for 2 seconds for manual power on. |
| Shutdown | Place earbuds back into charging case, close lid (auto-disconnect/sleep). Long press headset touch key for 5 seconds for manual shutdown. |
| Volume Up | Triple tap the right earbud. |
| Volume Down | Triple tap the left earbud. |
| Previous Song | Double-click the left earbud. |
| Next Song | Double-click the right earbud. |
| Play/Pause/Dial | Single click. |
| Answer Call | Single click when a call comes in. |
| Reject Call | Press and hold for 2 seconds. |
| Siri/Voice Assistant | Press and hold for 2 seconds, followed by a beep. |
| Headset Pairing | Headsets are automatically paired when taken out of the warehouse. |
Specifications
| Match Name | J01 |
| Bluetooth Version | V5.3 |
| Headset Battery Capacity | 50mAh |
| Charging Box Battery Capacity | 400mAh |
| Bluetooth Effective Distance | 10m |
| Operating Voltage | 3-4.2V |
Matters Needing Attention (Safety & Care)
Please observe the following precautions for safe and optimal use of the product:
- Do not use abrasive cleaners for cleaning.
- Keep the product away from heat or fire sources, such as cooking stoves.
- Avoid prolonged exposure to direct sunlight.
- Do not discard the product in fire, as it may cause an explosion.
- Do not attempt to disassemble or modify the product, as it contains no user-serviceable parts.
- Do not use the product in the rain.
- If the product will not be used for an extended period, store it in a dry environment and charge the headset at least once to prolong its lifespan, avoiding extreme temperatures and dust.
FCC Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Note: The Grantee is not responsible for any changes or modifications not expressly approved by the party responsible for compliance. Such modifications could void the user's authority to operate the equipment.
The device has been evaluated to meet general RF exposure requirements. This equipment complies with FCC's RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna(s) must not be co-located or operated in conjunction with any other antenna or transmitter.
Label: FCC ID: 2A27VJ01
