AESCULAP DURATI Battery-Powered Clipping Machine

Brand: AESCULAP SCHERMASCHINEN

This document provides instructions for use and technical descriptions for the AESCULAP DURATI battery-powered clipping machine.

Product Overview

The AESCULAP DURATI is a battery-powered clipping machine designed for cutting human and animal hair. It is powered by a rechargeable Li-ion battery and charged using the XT433 charger.

Key Components

Cutter Head Holder (1): Holds the cutter head.
Clipping Machine (2): The main unit.
Battery Release (3): Mechanism to detach the battery.
Charger (4): For charging the battery and the machine.
Mains Connection Cable (5): Connects the charger to the power outlet.
Charging Slot for Li-ion Battery (6): For charging the spare battery.
Li-ion Battery (7): The rechargeable power source.
Charge Status Indicator (8, 9): Displays charging status.
Charging Slot for Clipping Machine (10): For charging the machine directly.
On/Off Switch (11): Controls the machine's power.
Cutter Head (12): The cutting mechanism.
Cutter Head Release (13): Mechanism to detach the cutter head.
Power Supply Unit (14): Part of the charger.
Adapter (15): For different plug types (EU, UK, USA, AUS).
Adapter Locking Mechanism (16): Secures the adapter.

Safety Instructions

DANGER: Risk of electric shock! Do not open the product (except for battery replacement).

WARNING: Risk of burns! Cutter heads can become hot after extended use. Do not touch hot cutter heads; allow them to cool down.

Always check the product's functionality and condition before use. Store the charger and batteries at room temperature and keep them dry. Charge Li-ion batteries before first use. Follow EMC guidelines. Use the product only as described in this manual and adhere to safety information. Only use manufacturer-approved accessories. Ensure the product is operated by trained individuals. Keep the manual accessible. Comply with national regulations, including electrical installation and fire/explosion protection standards. Do not use in explosive environments. Do not use damaged or defective products.

Note: The device can be used by children aged 8 and above, and by persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, if supervised or instructed on safe use and understand the resulting hazards. Keep children away from the device. Cleaning and maintenance should not be performed by children without supervision.

Operation

Charging the Battery and Machine

The charger (XT433) is designed for a voltage range of 100-240V and 50-60Hz. Connect the charger to the mains. The charger has two slots: one for the clipping machine (front) and one for the Li-ion battery (rear). Insert the Li-ion battery or the clipping machine into the respective slot to begin charging. The charge status indicator will blink green while charging and turn solid green when fully charged. A red blinking light indicates a defective battery or charger.

Charging Principle: Li-ion batteries are charged with constant current pulses. The charging process is monitored to ensure a 100% charge without overcharging. Battery temperature and charging time are also monitored. Only one charging slot is active at a time; the machine is charged first, then the spare battery if inserted.

Charging Time: Approximately 240 minutes for a full charge.

Cutter Head Handling

Attaching the Cutter Head: Ensure the cutter head (12) is correctly aligned with the cutter head holder (2) and the mechanism (17). Press the cutter head onto the holder until it audibly clicks into place. Ensure it is securely attached.

Oiling the Cutter Head: Clean the upper and lower cutting plates with a soft cloth or brush, ensuring the gaps between teeth are clean. Lightly oil the plates with special oil for cutter heads (GT604).

Replacing the Cutter Head: Turn off the clipping machine. Press the cutter head release (13) and lift the cutter head forward. Remove the cutter head. Clean the opened cutter head mechanism with a brush. Attach the new cutter head and ensure it clicks into place.

Replacing the Li-ion Battery: Hold the clipping machine (2) and press the battery release buttons (3). Pull the Li-ion battery (7) out of the machine. Insert a charged Li-ion battery until it clicks into place.

Cleaning and Maintenance

Manual Cleaning/Disinfection: Before cleaning, unplug the charger. Ensure no liquid enters the product. Allow the product to air dry for at least 1 minute after cleaning/disinfection. Wipe the housing with a lint-free cloth dampened with a standard disinfectant. If necessary, wipe off residue with a clean, damp cloth. Clean charging contacts with isopropyl alcohol or ethyl alcohol using a cotton swab. Avoid corrosive chemicals. Never immerse the product in water or cleaning agents. Do not introduce liquid into the charging slots.

Control, Care, and Testing: Allow the product to cool to room temperature. After each cleaning/disinfection, check for cleanliness, function, and damage. Oil the cutter head as needed. Check the product for damage, irregular noise, overheating, or excessive vibration. Inspect the cutter head for broken, damaged, or dull blades. Discard damaged products immediately.

Maintenance: Annual maintenance is recommended for reliable operation.

Troubleshooting

Clipping Machine Not Starting: Check switch position; charge the Li-ion battery. If the battery is defective or not inserted correctly, replace it. If the machine stops, check if the battery is low or if the safety circuit has been activated (turn off and on again).

Machine Not Charging: Ensure the mains cable is plugged in correctly. Check for a defective mains cable or charger. If the battery is not charging, check contacts in the charging slot; they may be dirty or damaged. If the battery is defective, it may need replacement by the manufacturer. If the battery overheats during charging, remove it, let it cool, and restart charging. If the problem persists, contact the manufacturer.

Technical Specifications

Clipping Machine (DURATI): Model: XT434-XX/XT436-XX, Speed: 3,300 strokes/min, Charge/Output Voltage: max. 7.4 V, Charge/Output Current: max. 1 A, Weight: 380 g (with cutter head and battery).

Charger (XT433): Input Voltage: 100-240 V, Frequency: 50-60 Hz, Charge/Output Voltage: max. 7.4 V, Charge/Output Current: max. 1 A, Weight (incl. power supply): 242 g. Certified: CE, UL.

Li-ion Battery (XT431): Type: Li, Voltage: 7.4 V, Capacity: approx. 2,850 mAh, Charge Time: approx. 240 min.

Warranty and Disposal

Warranty: AESCULAP offers a 2-year warranty. The warranty covers manufacturing defects but excludes damage from improper use, normal wear and tear, or use with non-compatible accessories. AESCULAP reserves the right to repair or replace products under warranty.

Disposal: Electrical tools, accessories, and packaging should be recycled. Do not dispose of electrical tools in household waste. Dispose of batteries properly according to regulations (e.g., Directive 2006/66/EG); do not dispose of them in household waste, fire, or water.

Manufacturer Information

Service Addresses: Albert Kerbl GmbH, Felizenzell 9, 84428 Buchbach / Germany. Phone: +49 (0) 8086 933-100, Fax: +49 (0) 8086 933-500, E-Mail: info@kerbl.com, Website: www.kerbl.com.

Manufacturer: Aesculap Schermaschinen GmbH, Fröhliche-Mann-Straße 15, 98528 Suhl / Germany.

	Aesculap DURATI Battery-Powered Clipping Machine User Manual Comprehensive user manual for the Aesculap DURATI battery-powered clipping machine, covering operation, maintenance, safety, troubleshooting, and technical specifications.
	AESCULAP FAV5 CL/FORTIS Battery-Powered Clipping Machine User Manual Comprehensive user manual and technical guide for the AESCULAP FAV5 CL/FORTIS battery-powered clipping machine, detailing operation, safety, maintenance, troubleshooting, and specifications.
	Aesculap Favorita CLi Akku-Schermaschine: Bedienungsanleitung und technische Daten Umfassende Bedienungsanleitung für die Aesculap Favorita CLi Akku-Schermaschine. Enthält Sicherheitshinweise, technische Daten, Wartung und Fehlerbehebung.
	Aesculap Bonum Large Animal Clipping Machine User Manual User manual for the Aesculap Bonum battery-operated clipping machine, providing instructions for safe handling, operation, maintenance, and troubleshooting for grooming large animals like cattle, horses, and dogs.
	Aesculap Exacta/Isis Professional Animal Trimmer User Manual User manual for the Aesculap Exacta/Isis professional animal trimmer, detailing features, operation, safety, and maintenance. Includes instructions in English, French, Spanish, Japanese, and Chinese.
	AESCULAP Acculan 4 Li-Ion Battery Short GA346: Instructions for Use and Technical Data Comprehensive instructions for the AESCULAP Acculan 4 Li-Ion battery short GA346, covering safe handling, operation, maintenance, reprocessing, technical specifications, and disposal. Includes warnings and safety precautions from B. Braun.
	Aesculap Ring-Type and Spring-Type Scissors: Instructions for Use and Care Comprehensive guide from Aesculap (B. Braun) on the use, cleaning, disinfection, and maintenance of ring-type and spring-type surgical scissors. Includes safety protocols and technical details for medical professionals.
	AESCULAP GT804 GT806 Econom CL Cattle Clipper Spare Parts List Comprehensive spare parts list for AESCULAP GT804 and GT806 Econom CL cattle clippers, featuring detailed descriptions and model numbers for easy identification and ordering of replacement components.