Xiaomi Mijia Air Pump 2 (MJCQB06QW) User Manual

1. Introduction

The Xiaomi Mijia Air Pump 2 is a portable, rechargeable device designed for efficient and accurate tire inflation. Featuring tire pressure detection, preset pressure functions, and a high-capacity battery, it offers convenience for various inflation needs.

2. Product Overview

The air pump consists of the following main components:

• Main Unit: Houses the motor, battery, control panel, and display.

• Air Hose: Connects the pump to the tire valve. It typically screws onto the pump and the tire valve securely.

• Display Screen: Shows current pressure, target pressure, battery level, and mode.

• Control Buttons: Used for power, pressure adjustment, and mode selection.

Diagram Description: A visual representation of the Xiaomi Mijia Air Pump 2 shows a cylindrical main unit with a digital display at the top. Below the display are several buttons. An air hose extends from the front of the unit, terminating in a connector designed for tire valves. A USB-C charging port is usually located on the bottom or side.

3. Key Features

• High Pressure Capability: Inflates up to 150 PSI, suitable for car tires, bicycle tires (including road bikes), and other inflatables.

• Tire Pressure Detection: Automatically detects and displays current tire pressure.

• Preset Pressure Function: Allows users to set a target pressure, and the pump automatically stops when reached. (? Preset Function)

• Rechargeable Battery: Built-in 2000mAh battery, rechargeable via USB-C. (? Rechargeable)

• Fast Inflation: Efficient motor for quick inflation times.

• Multiple Modes/Units: Supports different pressure units (PSI, BAR, kPa) and may have presets for different tire types (e.g., bicycle, car, motorcycle).

4. Specifications

• Model: MJCQB06QW

• Battery Capacity: 2000mAh

• Charging Port: USB Type-C

• Maximum Pressure: 150 PSI (approx. 10.3 BAR)

• Operating Temperature: -10°C to 45°C

• Dimensions: [Approximate dimensions: 150 x 60 x 40 mm]

• Weight: [Approximate weight: 400g]

5. How to Use

1. Charge the Pump: Before first use, fully charge the pump using the provided USB-C cable and a compatible power adapter. The battery indicator on the display will show charging status. (? Charging)

2. Connect the Hose: Screw the air hose firmly onto the pump's air outlet. Then, screw the other end of the hose onto the tire valve.

3. Turn On: Press and hold the power button to turn the pump on. The display will illuminate.

4. Set Target Pressure:

   • Press the 'Mode' or 'Unit' button to cycle through pressure units (PSI, BAR, kPa).
   • Use the '+' and '-' buttons to set your desired target pressure. The pump may have pre-set modes for different vehicles (e.g., bicycle, car).

5. Start Inflation: Press the power button once to start inflation. The pump will automatically stop when the target pressure is reached. (▶️ Inflate)

6. Monitor Pressure: The display shows the real-time pressure as it increases.

7. Disconnect: Once inflation is complete, carefully unscrew the hose from the tire valve. (✔️ Done)

8. Turn Off: The pump may automatically shut off after a period of inactivity, or you can press and hold the power button to turn it off manually.

Diagram Description: An illustration shows the air hose being screwed onto a bicycle tire valve. Another diagram shows the pump's display with a target pressure of 35 PSI set, and the current pressure reading increasing.

6. Safety Precautions

• Always ensure the pump is used on a stable, flat surface.

• Do not operate the pump continuously for extended periods without allowing it to cool down, as this may cause overheating.

• Keep the pump away from water and flammable materials.

• Do not leave the pump unattended while it is operating.

• Ensure the target pressure is appropriate for the item being inflated. Over-inflation can be dangerous. (⚠️ Over-inflation Warning)

• Keep out of reach of children.

7. Maintenance and Care

• Clean the exterior of the pump with a soft, dry cloth. Do not use solvents or abrasive cleaners.

• Store the pump in a cool, dry place when not in use.

• Periodically check the air hose for damage.

• Recharge the battery when it is low to maintain battery health.

8. Troubleshooting

• Pump not turning on: Ensure the battery is charged. Connect to a power source via USB-C.

• Low inflation pressure: Check that the air hose is securely connected to both the pump and the tire valve. Ensure the tire valve is not leaking. Check if the target pressure is set too low.

• Pump stops unexpectedly: The battery may be low and require charging. The pump may have overheated; allow it to cool down.

• Inaccurate pressure readings: Ensure the pressure sensor is clean. Try recalibrating if the option is available in the settings (refer to advanced settings if applicable).

9. Warranty and Support

For warranty information and customer support, please refer to the official Xiaomi website or contact authorized Xiaomi service centers. Xiaomi provides support for its range of products, including the Mijia Air Pump series.