Motorola Vehicle Power Adapter PMPN4169A User Guide

Introduction

This document provides essential safety and operating instructions for the Motorola Vehicle Power Adapter PMPN4169A. It is designed to charge compatible Motorola radio batteries.

Important Safety Instructions

SAVE THESE INSTRUCTIONS.

Before using the battery charger, read all instructions and cautionary markings on the charger, the battery, and the radio using the battery.

Warnings

Risk of Injury: To reduce risk of injury, charge only rechargeable Motorola Solutions authorized batteries: PMNN4474, PMNN4507, PMNN4508, and PMNN4530. Other batteries could explode, causing personal injury and/or damage.
Accessory Use: Use of accessories not recommended by Motorola Solutions may result in risk of fire, electric shock, or injury.
Disconnecting Charger: To reduce risk of damage to the electric plug and cord, pull by the plug rather than the cord when disconnecting the charger.
Damaged Charger: To reduce risk of fire, electric shock, or injury, do not operate the charger if it has been broken or damaged in any way.
Do Not Disassemble: Do not disassemble the charger. It is not repairable and replacement parts are not available. Disassembly may result in risk of electric shock or fire.

Operational Safety Guidelines

This equipment is not suitable for outdoor use. Use only in dry locations/conditions.
Connect equipment only to an appropriately fused and wired supply of the correct voltage (as specified on the product).
Make sure the cord is located where it will not be stepped on, tripped over, or subjected to water, damage, or stress.
Output power from the power supply unit must not exceed the ratings stated on the product label located on the bottom of the charger.
The equipment may become warm during operation. If it becomes hot to touch, unplug from the outlet immediately and discontinue use.

Description

The Vehicle Power Adapter is used to charge the Lithium Ion (Li-Ion) batteries of compatible Motorola radios. Frequent charging will not adversely affect the battery's cycle life.

Operating Specifications

Input voltage range: 10.8 to 33 Vdc

Operating Instructions

The Vehicle Power Adapter is not to be used with any other radio.

Attaching the Vehicle Power Adapter:

(Refer to Figure 1)

Attach the Micro-USB connector to the Micro-USB receptacle of the radio.
Plug the Vehicle Power Adapter into the cigarette lighter socket of the vehicle.

Removing the Vehicle Power Adapter:

(Refer to Figure 1)

Unplug the Vehicle Power Adapter from the cigarette lighter socket of the vehicle.
Press the top of the accessory connector and pull away from the radio.

Diagrams and Visuals

Figure 1: Vehicle Power Adapter Connection

The Motorola Vehicle Power Adapter (model PMPN4169A) is shown. It has a Micro-USB connector on one end, designed to plug into the Micro-USB receptacle of a compatible Motorola radio. The other end features a plug for insertion into a vehicle's cigarette lighter socket. The product displays Motorola Solutions branding and certification marks such as CE and FCC ID.

Figure 2: Connection Example

This diagram illustrates the connection of the Vehicle Power Adapter. It shows the adapter's Micro-USB connector plugged into the radio's Micro-USB port, and the adapter's cigarette lighter plug inserted into a vehicle's auxiliary power socket. A list of components is also provided:

Connector
Micro USB Receptacle
Vehicle auxiliary power socket
Reference to Figure 1

Additional Information

For the complete User Guide, refer to manual MN003081A01 at: https://learning.motorolasolutions.com

Compatible Batteries: PMNN4474, PMNN4507, PMNN4508, PMNN4530

	Motorola Solutions NNTN8234 Dual-Unit Charger User Guide User guide for the Motorola Solutions NNTN8234 Dual-Unit Charger, detailing safety, operation, and troubleshooting for charging Motorola radios and batteries.
	IMPRES 2 Adaptive Single Unit Charger PMPN4523 User Guide - Motorola Solutions Comprehensive user guide for the Motorola Solutions IMPRES 2 Adaptive Single Unit Charger (PMPN4523). Learn about safe operation, charging features, battery maintenance, and troubleshooting for your Motorola communication equipment.
	Motorola Solutions RLN6434 Travel Charger User Guide User guide for the Motorola Solutions RLN6434 Travel Charger, providing safety instructions, operating procedures, and battery compatibility information.
	Motorola Solutions MXP600 Car Kit: Enhance Your Mobile Radio Experience Discover the Motorola Solutions MXP600 Car Kit, a vehicle adapter designed to transform your MXP600 portable radio into a virtual mobile radio. Enjoy in-vehicle battery charging, hands-free operation, and extended coverage for enhanced communication.
	IMPRES 2 Adaptive Single Unit Charger PMPN4523 User Guide Explore the Motorola Solutions IMPRES 2 Adaptive Single Unit Charger (PMPN4523) with this comprehensive user guide. Learn about safe operation, charging procedures, battery management, troubleshooting, and authorized accessories for optimal performance.
	Motorola Solutions Wireless RSM User Guide for Portable Radios This user guide provides comprehensive instructions for the Motorola Solutions PMMN4096 Wireless Remote Speaker Microphone (WRSM), including setup, operation, safety guidelines, and compatibility with chargers and portable radios. It details accessory usage, battery management, and troubleshooting.
	Motorola Solutions IMPRES Adaptive Single Unit Charger NNTN8845/NNTN9178 User Guide User guide for the Motorola Solutions IMPRES Adaptive Single Unit Charger (NNTN8845/NNTN9178), detailing safety instructions, operational guidelines, charging procedures, and troubleshooting for efficient battery management.
	Motorola Power Supply Safety Instructions \| MN007860A01-AB Essential safety guidelines for Motorola Solutions power supplies (model MN007860A01-AB), covering usage with IEC/EN/UL 62368-1 compliant equipment, indoor dry location use, proper connection, and handling of damaged units.