OTTO Mono Wood Desk Clock

Main Features

• Function Keys: SET / UP / DOWN
• Time Function: Displays hour and minute, supports 12/24 hour switchover.
• Calendar Function: Displays month and date.
• Alarms: Triple alarms function, daily alarm.
• Temperature Function: Range from 0°C-50°C (32°F - 122°F), supports °C/°F switchover.
• Display Methods: 3 options (dP-1, dP-2, dP-3).
• Power Saving Function: Press DOWN key to enable/disable. 'oNSd' indicates power saving is on, '--Sd' indicates power saving is off. When active, sound can wake the display.
• LED Display Activation: By sound control.
• Power Supply: 3 x AAA (UM-4) Batteries, or DC 5V 300mA, or USB charger. Using an adapter or USB simultaneously is suggested.
• Battery Backup: 1 piece of 3V CR2032 battery (included) for time memory.

Full Display Description

The display shows:

• PM Indicator
• Alarm Indicator
• Temperature Unit (°C/°F)
• Time: 88:88
• Alarm Time: 88:88

Operating Instructions

1. Upon power on, the LED turns on with a beep sound and enters TIME mode with temperature display.
2. Mode Selection: Press SET button to cycle through: TIME → CALENDAR → A1 (Alarm 1) → A2 (Alarm 2) → A3 (Alarm 3) → TIME.
3. Setup: In any mode, press and hold SET for 2 seconds to enter setting. Use UP/DOWN to adjust values. Holding buttons speeds up digit changes.
4. Display Methods: In TIME or CALENDAR mode, press UP to switch between dP-1 (alternating time/date), dP-2 (selective display), and dP-3 (time display with return to time after 15 seconds).
5. Power Saving: Press DOWN to toggle power saving. 'oNSd' means power saving is on. Sound activates the display, which turns off after 10 seconds of inactivity. Alarms remain active.
6. Temperature Unit: In any mode, press and hold DOWN for 2 seconds to switch between Celsius and Fahrenheit.

Time Setting

1. Default time is 12:00 AM (12-hour system).
2. 12/24 Hour Format: In TIME mode, press and hold SET for 2 seconds. A 12 Hr indicator flashes. Use UP/DOWN to switch between 12/24 hour format. A dot on the top left indicates PM in 12-hour format.
3. Adjust Time: In TIME mode, press and hold SET for 2 seconds, then press SET repeatedly to adjust Hour, then Minute. Press UP/DOWN to adjust digits. The display returns to normal after 15 seconds of inactivity.
4. Deactivate Alarm: Go to alarm mode and turn off the alarm by changing the indicator to -A1/-A2/-A3.

Date Setting

Under normal time display mode, press SET to enter CALENDAR mode.

1. Adjust Date: Press and hold SET for 2 seconds to enter date setting. Press SET repeatedly to set Year → Month → Day. Use UP/DOWN to adjust digits. The display returns to normal after 15 seconds of inactivity.

Alarm Setting

Under normal time display mode, press SET twice for A1 (Alarm 1), press SET again for A2 (Alarm 2), and again for A3 (Alarm 3).

1. Adjust Alarm: In alarm mode (-A1/-A2/-A3), press UP to toggle alarm ON/OFF (ONA1/ONA2/oNA3 indicates alarm ON, -A1/-A2/-A3 indicates alarm OFF). After selecting an alarm, press and hold SET for 2 seconds to enter alarm setting. Press SET repeatedly to adjust Hour → Minute. Use UP/DOWN to adjust digits. The display returns to normal after 15 seconds of inactivity.
2. Alarm Signal: The alarm sounds daily for 1 minute if activated. A dot on the display indicates an active alarm.
3. Switch Off Alarm: Press any key to stop the daily alarm when it sounds.

Temperature Display

After power on, the temperature is automatically detected and updated every minute.

Product Warranty - Valid for Australian Customers Only

Officeworks Ltd warrants this product for 1 year from the date of purchase against defects and improper function. Officeworks will repair or replace the product at its discretion and expense if it fails to meet specifications during the warranty period.

This warranty does not apply to:

• Cosmetic damage.
• Damage caused by consumables (e.g., batteries).
• Damage from use not in accordance with instructions.
• Damage from normal wear and tear.
• Damage from unreasonable use.
• Damage from intentional or negligent acts.
• Attempts by the customer to repair the product.

To claim under this warranty, return the product with proof of purchase to an Officeworks store or contact 1300 633 423. This warranty is in addition to rights under the Australian Consumer Law, which provides for refunds or replacements for major failures and compensation for other foreseeable losses.

Manufacturer Information:

MADE IN CHINA
OFFICEWORKS LTD
236-262 EAST BOUNDARY RD
EAST BENTLEIGH VIC 3165 AUSTRALIA

Important Safety Information

WARNING! KEEP BATTERIES OUT OF REACH OF CHILDREN. Swallowing button batteries can cause severe internal injuries in as little as 2 hours. If swallowed, contact the Australian Poisons Information Centre on 13 11 26 immediately. Ensure battery compartments are securely fastened. Dispose of used batteries safely by taping both sides and placing them in an outdoor bin, out of reach of children.