Autel MaxiCOM MK906 Pro2-TS Quick Reference Guide

Thank you for purchasing this Autel MaxiCOM MK906 Pro2-TS. Our tools are manufactured to a high standard and - when used according to these instructions and properly maintained - will provide years of trouble-free performance.

MaxiCOM MK906 Pro2-TS Components

The MaxiCOM MK906 Pro2-TS tablet features the following components:

1. 8-inch LED Capacitive Touchscreen
2. Ambient Light Sensor - detects ambient brightness
3. Power LED
4. Front Camera
5. Microphone
6. TPMS Service Symbol - indicates the position of the embedded TPMS antenna
7. Collapsible Stand - extends from the back for hands-free viewing
8. Rear Camera
9. Camera Flash
10. TF Card Slot
11. DC Power Supply Input Port
12. USB Type-C Port - supports charging
13. USB Port - for VCI Connection
14. HDMI Port
15. Headset Jack (3-band 3.5 mm)
16. Lock/Power Button - press and hold to turn on/off the tablet, or tap to lock the screen

VCI (Vehicle Communication Interface) Device - MaxiVCI V200

The MaxiVCI V200 is the Vehicle Communication Interface device for the MaxiCOM MK906 Pro2-TS.

1. Flashlight Button
2. Power LED
3. Vehicle/Connection LED
4. Vehicle Data Connector (16-pin)
5. USB Port

VCI LED Description

LED	Color	Description
Power LED	Yellow	The VCI is powered on and performing self-check.
	Green	The VCI is ready for use.
	Flashing Red	The firmware is updating.
Vehicle /Connection LED	Green	- Solid Green: The VCI is connected via USB cable. - Flashing Green: The VCI is communicating via USB cable.
	Blue	- Solid Blue: The VCI is connected via Bluetooth. - Flashing Blue: The VCI is communicating via Bluetooth.

Operating Instructions

IMPORTANT: Before operating or maintaining this unit, please read these instructions carefully, paying extra attention to the safety warnings and precautions. Failure to use this product properly may cause damage and/or personal injury and will void the product warranty.

Connecting the MaxiVCI V200

Insert the Vehicle Data Connector on the MaxiVCI V200 into the vehicle's DLC (Data Link Connector), which is generally located under the vehicle dashboard. [Arrow pointing to a location under the dashboard].
Ensure the tablet is sufficiently charged or is connected to the supplied DC power supply. [Power symbol].
Power up the tablet. [Power button icon].
Pair the tablet with the MaxiVCI V200 via Bluetooth to establish a communication link. [Bluetooth symbol]. Alternatively, connect the devices using a USB cable. [USB cable icon].

NOTE: The tablet and the MaxiVCI V200 are configured to automatically synchronize with each other on first use, so there should be no need to pair them manually.

Vehicle Diagnosis Ready

When the MaxiVCI V200 is properly connected to the vehicle and the tablet, the VCI status button on the bottom bar of the screen will display a green badge at the corner, indicating the tablet is ready to start vehicle diagnosis. [Green badge icon].

TPMS Sensor Activation

Hold the MaxiCOM MK906 Pro2-TS tablet with its top right corner close to the tire sidewall at the valve stem to activate the TPMS sensor. [Magnifying glass icon highlighting the top right corner of the tablet near a tire valve stem].

	Autel MaxiCOM MK906S PRO & MK906S PRO-TS User Manual User manual for the Autel MaxiCOM MK906S PRO and MK906S PRO-TS advanced smart wireless diagnostic devices, covering setup, diagnostics, TPMS, service functions, and battery testing.
	Autel MaxiSys Quickstart Guide: Connecting to Wi-Fi, Tool Registration, and Software Updates A comprehensive quickstart guide for Autel MaxiSys devices, covering Wi-Fi connection, tool registration via PC and tablet, software updates, VCI connection, vehicle identification, auto-scan, fault scan, and report generation.
	Autel MaxiSys Quickstart Guide: Connecting, Registering, and Using Your Device A comprehensive quickstart guide for Autel MaxiSys diagnostic tools, covering Wi-Fi connection, tool registration, software updates, vehicle identification, and system suite applications.
	MaxiCOM MK906S PRO2-TS User Manual - Autel Diagnostics Comprehensive user manual for the Autel MaxiCOM MK906S PRO2-TS advanced smart wireless diagnostics device. Covers system overview, getting started, diagnostics, TPMS, service functions, battery testing, data management, settings, updates, support, and compliance information.
	Autel MaxiSys MS906 Pro-TS Quick Reference Guide A quick reference guide for the Autel MaxiSys MS906 Pro-TS automotive diagnostic and analysis system, detailing its display tablet and MaxiVCI V200 communication interface.
	Autel MaxiCOM MK906S PRO2-TS User Manual Comprehensive user manual for the Autel MaxiCOM MK906S PRO2-TS, an advanced smart wireless diagnostics device for automotive service. Covers system overview, getting started, diagnostics, TPMS, service functions, battery testing, data management, settings, updates, support, and compliance information.
	Autel MaxiCOM MK900-BT Quick Reference Guide A quick reference guide for the Autel MaxiCOM MK900-BT, detailing setup and initial usage instructions for vehicle diagnostics.
	Autel MaxiSys MS906 Pro Quick Reference Guide A quick reference guide for the Autel MaxiSys MS906 Pro diagnostic tablet and MaxiVCI V200 vehicle communication interface.