Proscenic Wash Vac F20 Cordless Wet Dry Vacuum Cleaner

Introduction

Live Smart, Live Easy.

Contact Information:

• Proscenic Technology Co., Ltd.
• Service support
• Web: www.proscenic.com
• E-mail: support@proscenic.com

Precautions

Please read the following precautions carefully before using this appliance:

• Use only indoors on non-carpeted floor surfaces such as vinyl, tile, sealed wood, etc. Be careful not to run over loose objects or carpet edges.
• Use only the battery pack and charger specified by Proscenic. Using any other battery pack may cause personal injury and fire risk.
• Do not use your product to clean flammable or chemical products such as gasoline, strong acids, or strong alkalis; do not use WashVac F20 to pick up sharp objects such as metal nails, glass fragments, and needles.
• Do not touch the charger and the plug with wet hands.
• Do not use WashVac F20 without the filter.
• Do not use the damaged power cable or plug. If WashVac F20 is dropped, damaged, left outdoors, falls into water, or fails to work properly, contact our service center.
• Be extra careful when cleaning on the stairs.
• Keep your hair, clothing, fingers, and all parts of your body away from openings and moving parts.
• Do not use WashVac F20 when the water depth exceeds 5 mm.
• Turn off this appliance before making any adjustments, replacing accessories, or storing this appliance.
• WashVac F20 can only be used, charged, and stored in a dry room where the temperature is higher than 4°C but lower than 35°C.
• If you accidentally drop the battery, liquid may run out of the battery. Avoid touching it. If touched accidentally, rinse with water. If liquid gets into your eyes, seek medical help.
• If this appliance overheats, makes abnormal noise, produces abnormal smell or leaks, stop using it immediately.
• For long-term storage, please turn off WashVac F20 and disconnect the power from the socket.
• Be sure to clean the dirty water tank after each use to avoid clogging, which will result in poor suction, motor overheating or shortened service life of this appliance.
• All data and technical descriptions in this manual are based on test results from Proscenic laboratory tests and Proscenic reserves the right of final interpretation.

FCC Statement: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: (1) Reorient or relocate the receiving antenna. (2) Increase the separation between the equipment and receiver. (3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. (4) Consult the dealer or an experienced radio/ TV technician for help.

Disposal Information: ? This symbol on the device or its packaging indicates: Do not dispose of electrical appliances as unsorted municipal waste; use separate collection facilities. Contact your local authority for information regarding the collection systems available. If electrical appliances are disposed of in landfills or dumps, hazardous substances can leak into the groundwater and get into the food chain, damaging your health. When replacing old appliances with new ones, the retailer is legally obliged to take back your old appliance for disposal at least free of charge. For EU countries: Product EC Declaration of Conformity.

About Your Product

Product Components:

• Handle: The main grip of the appliance.
• Self-Cleaning/Roller Brush Air Drying: Feature for automatic cleaning and drying.
• Function Switching: Button to change operating modes.
• Power/WiFi: Button for turning the device on/off and connecting to WiFi.
• Digital Display: Shows status information.
• Language/Mute: Button to change voice prompts language or mute.
• Removable Battery: The power source, can be detached.
• Dirty Water Tank Release Button: Button to detach the dirty water tank.
• Dirty Water Tank: Collects dirty water.
• Clean Water Tank Release Button: Button to detach the clean water tank.
• Clean Water Tank: Holds clean water for washing.
• Roller Brush Top Cover: Protective cover for the roller brush.
• Roller Brush Cover Release Button: Button to release the top cover.
• Roller Brush: The rotating brush for cleaning.
• Roller brush side cover release: Mechanism to release the side cover of the roller brush.
• HEPA Storage Slot: Storage for HEPA filter.
• Roller Brush Storage Slot: Storage for spare roller brush.
• Cleaning Brush Storage Hole: Storage for the cleaning brush.
• Fan Port: Outlet for air from the fan.
• Antibacterial lamp: UV light for sterilization.
• Battery Charging Slot: Where the battery connects for charging.
• Charging Base: Dock for charging the appliance and battery.

Included Accessories:

• Cleaning Brush: Used to clean tanks and tubes. ?
• Cleaning Solution: For removing tough stains. ?
• HEPA Filter: Filters air, removes dust and pollutants. ?️
• Roller Brush: The main cleaning brush. ?
• APP Download and Connection Guide: Instructions for app setup.
• User's Manual: This document.
• Adapter: Power adapter. ?
• Battery: Power source. ?
• HEPA Filter: (Duplicate mention, likely referring to the filter itself)

Display Indicator Diagram

The digital display shows various indicators:

• WiFi Indicator: Shows WiFi connection status. ?
• Roller Brush Bacteriostasis Indicator: Indicates antibacterial function status. ✨
• SMART Mode Indicator: Shows when SMART mode is active. ?
• MAX Mode Indicator: Shows when MAX mode is active. ?
• Roller Brush Error Indicator: Alerts to roller brush issues. ❗
• Suction Power Loop: Visual representation of suction level.
• Air Drying Indicator: Shows when air drying is active. ?
• Sterilization Mode Indicator: Shows when sterilization mode is active. ✨
• Suction Mode Indicator: Shows when suction mode is active. ?
• Fan Abnormal Indicator: Alerts to fan malfunction. ❗
• Error Indicator: General error alert. ❗

Product Use

Assembly

To assemble the handle:

1. Insert the handle directly into the appliance until you hear a click. ?
2. To disassemble the handle, use a tool (such as a screwdriver) to release the handle by pressing the spring, and then lift the released handle from the appliance.

Charging:

1. Place the device on the charging stand first, then plug in the charger to charge. It may take 4 hours for a full charge.
2. The battery can also be removed and separately charged on the base, but ensure the charging slot is dry.
3. To avoid tripping hazards, place the appliance and the charging base close to a wall while charging.

Note: When not in use for a long period of time, the appliance must be charged once every month for optimal performance.

Instructions for battery removal: Press the buttons on both sides of the battery and pull it out. ?

Note: Battery can be directly charged on the base.

Operation

1. Press the power button ⏻ to start the appliance. It will begin in SMART mode by default. Press again to turn off.
2. Press the function button to switch among SMART, MAX, Sterilization, and Suction Modes.
3. Long-press the power button ⏻ for 5 seconds to configure the network. For detailed instructions, please follow the "APP Download and Connection Guide". (Search "Proscenic" in the mobile app store to download the APP.)
4. Press the Language/Mute button to switch languages (sequence: English, German, French, Italian, Spanish). Long-press for 3 seconds to turn on/off the voice prompts.
5. Do not recline the appliance more than 140° to prevent water leakage. (The appliance cannot be fully extended when the gap under furniture is less than 50cm). ⚠️ Tilt angle <140°, 50cm clearance needed.
6. After use, place the appliance vertically on the charging base for charging and storage.
7. When the appliance is charging on the base, press the self-cleaning button to automatically clean the roller brush and tube. After self-cleaning, the Sterilization UV Light ? and fan ? will turn on automatically after a 5-second delay.
8. When the appliance is charging on the base, long-press the self-cleaning button for 5 seconds to turn on/off the antibacterial lamp ? and fan ?.

Cleaning Modes

• SMART Mode: The appliance automatically applies different suction power and sprays the appropriate amount of water according to the degree of dirt detected by the sensor.
• MAX Mode: The appliance applies maximum suction and sprays the maximum amount of water for deeper cleaning.
• Sterilization Mode: The appliance produces sterilizing solution and works in SMART mode. ✨
• Suction Mode: The appliance only absorbs liquids and does not spray water. ?

Product Maintenance

To ensure optimal performance and prevent odors, thoroughly clean and dry the clean water tank, dirty water tank, filters, cleaning tool, roller brush, roller brush cover, and roller brush side cover after each use. After maintenance, place the appliance vertically on the charging base and store it in a dry place indoors.

Main Body

Before cleaning, stop the appliance and unplug the power plug ?. Clean the surface with water or neutral detergent and wring out the cloth to prevent water from entering the appliance.

Dirty Water Tank

When the dirty water reaches the Max line, the appliance will stop work, display a reminder, and play a voice prompt. Remove the tank, use a cleaning brush ? to remove residual debris, and flush the tank interior. (Pay attention to the direction of the hand ?)

Diagram shows steps 1-4 for removing and cleaning the dirty water tank.

Roller brush self-cleaning

1. After use, place the appliance back on the charging dock for self-cleaning. Press the self-cleaning button to start the process.
2. After completion, you will hear the voice prompt "Cleaning completed, please clean the dirty water tank".

Note: Before self-cleaning, the battery level should exceed 20%, the dirty water tank should be emptied, and the clean water tank level should exceed 40%.

Filter

Grab the sides of the filter and pull it up. Wash it under running water, and then install it back into the machine until it is dry. * Your appliance has a spare filter for easy replacement.

Diagram shows steps 1-3 for removing and installing the filter.

Roller brush top cover

1. Grab the front handle while holding down the button, and pull up to remove it.
2. Wash it with water.
3. Make sure the cover is locked in place when installed, to avoid water leakage.

Diagram shows the release button and cover removal.

Roller Brush

1. Hold down the right button to remove the cover, and then pull out the Roller Brush to the right.
2. Remove hair and debris from the Roller Brush with a cleaning tool ?, and then rinse with water.
3. Remove hair and debris from the Roller Brush box and tube with the cleaning brush ?.

Note: Your appliance has a spare Roller Brush for easy replacement.

Diagram shows steps for removing the roller brush.

Troubleshooting

Product Specification

Customer Service

Email: support@proscenic.com

Phone support: Currently, only in English and Japanese. More languages support coming soon...

Manufacturer Information:

Proscenic Technology Co., Ltd. (Authorized manufacturer)

Shenzhen Proscenic Technology Co., Ltd. (manufacturer)

Floor 8, Block A, building 5, Tusincere Park, Longcheng street, Longgang district, Shenzhen City, China

EU Representative:

PROSCENIC EU LTD

71-75 Shelton Street, Covent Garden, London, WC2H 9JQ, ENGLAND

PROSCENIC TECHNOLOGY GmbH

EU REP Laubenhof 23, Essen Nordrhein-Westfalen 45326 Deutschland

E-mail: proscenicde@outlook.com

Tel: +49211 9753 8868