MOMAN H4C Motorcycle Helmet Headset
User Manual and Operational Guide
Caring For Your MOMAN Product
- Please keep the product in a dry, clean, dust-free environment.
- Keep corrosive chemicals, liquids, and heat sources away from the product to prevent mechanical damage.
- Use only a soft and dry cloth for cleaning the product.
- Malfunction may be caused by dropping or impact from external force.
- Do not attempt to disassemble the product. Doing so voids the warranty.
- Please have the product checked or repaired by authorized technicians if any malfunctions occur.
- Failure to follow all instructions may result in mechanical damage.
- Warranty does not apply to human errors.
Package List
- H4C Helmet Headset x1
- Changeable hard mic and soft mic speakers x1
- Back Clip x1
- Type-C charging cable x1
- Velcro Clip Kit x1
- TF card x1
- User Manual x1
Operation
Thank you for choosing a MOMAN product. Please read this manual carefully before use and follow all instructions mentioned herein.
Note: Before installing the headsets, follow the Quick Manual instructions to connect your phone and audition the sound and volume. If there is a large difference in sound effect and volume after installing it on the helmet, please adjust the position of the speaker in the helmet.
1. Power On/Off
Power On: Press and hold the Power/Play/Pause key [M] for 3 seconds. Voice prompt indicates power on.
Power Off: Press and hold the Power/Play/Pause key [M] for 3 seconds. Voice prompt indicates power off.
2. Bluetooth Connection
Status:
- Bluetooth not connected: Blue light flashes quickly [Blue Light Flashing Quickly].
- Bluetooth connected: Blue light flashes slowly [Blue Light Flashing Slowly].
3. Language Switch
Action: Double click the Volume Up key [Volume Up Button] (when Bluetooth is not connected). This switches between manual and automatic answering modes.
Available Languages: English, Japanese.
4. Phone Control
Automatic Answering Mode: Incoming call: After 10 seconds, the call is answered automatically. Short press [Answer Call Button] to answer manually. Long press [Reject Call Button] for 2 seconds to reject the call.
Manual Answering Mode: Incoming call: Short press [Answer Call Button] to answer. Short press [End Call Button] to end the call. Long press [Reject Call Button] for 2 seconds to reject the call.
Redial Last Call: Double click the Volume Up key [Volume Up Button].
Cancel Call: Short press the Volume Down key [Volume Down Button].
5. Music Control
- Play/Pause: Short press the Power/Play/Pause key [M].
- Next Song: Short press the Volume Up key [Volume Up Button].
- Previous Song: Short press the Volume Down key [Volume Down Button].
6. AI Voice Assistant
Action: Short press the AI Voice Assistant key [Voice Assistant Button] (when Bluetooth is connected) to wake up the voice assistant.
7. Recorder/Video Recording
- Recorder On/Off: Long press for 3 seconds to switch the recorder on/off.
- Recording Start/Finish: Short press the Recorder switch [Record Button].
- Recorder Indicator Light: Blue light on [Blue Light On] when recording.
8. Photo Taking/WIFI
- Taking Photo: Short press the Camera key [Camera Icon] (when WIFI is not connected).
- WIFI On/Off: Double click the WIFI key [WIFI Icon] to turn the WIFI function on/off.
- WIFI Indicator Light: Blue-green light on [Blue-Green Light On] when WIFI is on. Green light off [Green Light Off] when WIFI is off.
9. Charging Mode
- Charging: Red light on [Red Light On] when charging.
- Fully Charged: Red light off [Red Light Off] when fully charged.
- Note: If you charge the Helmet Headset while it is switched on, it will automatically switch off.
Instruction Warning
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. Operation is subject to two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
APP Installation and Operation
1. Download APP: Scan the QR code or search "Roadcam" in the App Store (Android/iOS) to download the APP. Allow information services and camera access.
2. Connect Phone to Recorder WIFI:
- Switch on the Recorder: Long press [Power Button] for 3 seconds. Recorder indicator light turns blue [Blue Light On].
- Turn on Recorder WIFI: Double click [WIFI Icon]. Recorder WIFI is on (Blue-green indicator light on [Blue-Green Light On]).
- Connect to APP: Open the Roadcam APP and click "Add Recorder". Search for WIFI "MOMAN H4C PLUS" and connect. Go back to the app. After clicking "MOMAN H4C PLUS", you can start recording.
Note: After connecting to the Recorder WIFI, mobile web traffic and other WIFI cannot be used.
3. Immediate Recording: The app interface shows controls for Video and Photo. Click to pause recording [Pause Button Icon].
4. Setup Parameters: Access the settings menu within the app to configure parameters like Photo quality, Loop video, and Power frequency.
5. View Recorded Videos/Photos: Select the desired video or photo from the app interface.
6. Download Videos/Photos: Click the "Download" button to save recorded content to your phone.
Specifications
| Feature | Details |
|---|---|
| Bluetooth Version | 5.3 |
| Bluetooth Name | MOMAN H4C PLUS |
| Bluetooth Protocol | A2DP, AVRCP |
| Charging Port | Type-C |
| Standby Time | 500H |
| Working Time | 50H |
| Battery | 1500mAh |
| Charging Time | 3H |
| Charging Voltage | 5V/1A |
| Speaker Diameter | 40mm |
| Video Pixels | 1080P |
| Wide Angle Camera Shot | Wide 120° |
| Waterproof | IPX6 |
| Video Duration | 6.5H (Music off) |
| Maximum Memory | <256G |
| Frequency Range | 2.4GHz |
| Temperature Range | -20℃-50℃ |
| Connection Distance with Mobile | 20m |
Indicator Light Status
| Operation | Indicator Light Status |
|---|---|
| Switch on | Blue light on [Blue Light On] |
| Switch off | Light off [Light Off] |
| Start recording | Blue light on [Blue Light On] |
| Pause recording | Blue light flashes [Blue Light Flashing] |
| Turn on WIFI | Blue-green light on [Blue-Green Light On] |
| Turn off WIFI | Green light off [Green Light Off] |
| SD card abnormal | Blue and green flash seven times [Blue-Green Flashing Seven Times] |
| Connect a computer to a card reader | Blue and green lights flash alternatively [Blue-Green Flashing Alternately] |
Notes
- Recorded Video time and filesize: One file every five minutes (can be changed manually in the setting of APP).
- Recording mode: Loop recording (When the storage card is full, it will automatically overwrite previous files).
- No signal: When connecting the recorder WIFI, no signal from the cell phone is a normal phenomenon.
- APP connection failure: Please make sure it is the correct WIFI name; or quit APP and restart the machine to reconnect.
- Electricity shortage: Due to the high power consumption of recording, the Recorder will turn off first, and the Bluetooth function works normally.
