Geberit Sigma Flush Plate Installation Manual

This manual provides detailed, step-by-step instructions for the installation of Geberit Sigma flush plates.

Step 1: Frame Placement

Position the mounting frame against the wall. Align the frame with any pre-marked guides or installation points on the wall. Arrows indicate the correct orientation and placement.

Step 2: Securing the Frame

Insert screws into the designated holes on the mounting frame. Tighten the screws to securely fix the frame to the wall surface. The diagram shows screws being driven into the frame.

Step 3: Cistern Connection

Attach the cistern's water inlet pipe to the corresponding connection point on the mounting frame. Ensure a firm and secure connection is made.

Step 4: Water Supply Connection

Connect the main water supply line to the frame's inlet. The diagram includes a timer icon indicating a waiting period of approximately 30 seconds, likely for pressure equalization or system filling.

Step 5: Flush Valve Installation

Insert the flush valve mechanism into its designated slot within the mounting frame. Ensure the mechanism is correctly oriented for proper function.

Step 6: Securing the Flush Valve

Secure the flush valve mechanism within the frame. This is typically done using integrated clips or locking tabs shown in the diagram.

Step 7: Frame Depth Adjustment

Adjust the mounting frame's depth to ensure it is perfectly flush with the finished wall surface. The diagram indicates an adjustment range of '0 mm' for a flush fit.

Step 8: Final Frame Securing

Complete the frame installation by securing it with screws. The diagram emphasizes achieving a '0 mm' adjustment, meaning the frame should be perfectly level and flush with the wall.

Step 9: Operating Rods Attachment

Connect the operating rods, which link the flush plate to the flush valve, to their respective attachment points on the flush valve mechanism. Arrows show the direction of connection.

Step 10: Flush Plate Mechanism Mounting

Mount the flush plate mechanism onto the frame. Secure it using screws, ensuring a precise 90-degree angle for optimal alignment and operation. The diagram shows screws being tightened at this angle.

Step 11: Flush Plate Attachment

Attach the flush plate itself to the installed mechanism. The diagram shows the plate being pressed into place, likely engaging with clips or mounting points on the mechanism.

Step 12: Testing and Verification

Perform a final test of the flush plate functionality. The diagram shows water droplets (?) and a checkmark icon (✔️), indicating successful operation and verification of water flow.

Models: 996.653.00.0 06 Sigma 20 Flush Button For Double Flushing, 996.653.00.0 06, Sigma 20 Flush Button For Double Flushing, Flush Button For Double Flushing, Button For Double Flushing, Double Flushing, Flushing

File Info : application/pdf, 4 Pages, 2.83MB

gema 996653000 06

References

Spitzenleistungen in der Sanitärtechnik. Weltweit. | Geberit Gruppe

ST4 PDF Engine (Build 12.0.4.0) SCHEMA ST4

Related Documents

	Geberit Sigma 01 Dual Flush Plate Installation Manual Comprehensive installation guide for the Geberit Sigma 01 Dual Flush Plate (Model 996.653.00.0(06)). Provides step-by-step instructions and visual aids for proper mounting and setup.
	Geberit Sigma01 Dual Flush Plate Installation Manual Step-by-step installation guide for the Geberit Sigma01 Dual Flush Plate, providing clear instructions and diagrams for proper mounting and assembly.
	Geberit Sigma Series Installation and Cleaning Manual Comprehensive installation guide for Geberit Sigma series flush plates and cistern mechanisms, including detailed steps and cleaning instructions. Covers Sigma 12 cm and Sigma 8 cm models.
	Geberit Sigma10 Installation Manual: Step-by-Step Guide Comprehensive installation manual for the Geberit Sigma10 WC flush control system. Includes detailed instructions, diagrams, and setup guidance.
	Geberit Sigma 12 CM Installation Manual Comprehensive installation manual for the Geberit Sigma 12 CM concealed cistern system, detailing step-by-step assembly, frame mounting, valve installation, and flush plate attachment for plumbing professionals.
	Geberit Sigma10 Installation Manual Step-by-step installation guide for the Geberit Sigma10 WC flush control system, covering mounting, connections, and setup for various configurations. Includes multilingual instructions and technical details.
	Geberit Toilet Installation Guide Step-by-step installation instructions for Geberit toilet systems, including mounting the frame, connecting water supply, and attaching the toilet bowl.
	Geberit Toilet Installation Guide Step-by-step installation instructions for Geberit toilet mounting systems, detailing pipe connections and fixture placement.