Geberit Sigma Series Installation Manual

Introduction

This manual provides detailed installation instructions for Geberit Sigma series flush plates and cistern mechanisms. It also includes essential cleaning guidelines to ensure the longevity and optimal performance of your Geberit product. Please follow these instructions carefully.

Installation Instructions

The following steps detail the installation process. Refer to the diagrams for visual guidance. Note that some steps may vary slightly between Sigma 12 cm and Sigma 8 cm models.

Section A: Sigma 12 cm Installation

Step A: The diagram shows two types of flush plate mechanisms, one with two circular openings and one with a rectangular opening, alongside the corresponding cistern frames. This step likely involves identifying the correct mechanism for the Sigma 12 cm model.

Step 1: Depicts attaching a blue mounting frame to a wall grid. Arrows indicate the direction of attachment, and numbers 1 and 2 point to connection points on the frame and wall structure.

Step 2: Shows the blue frame being positioned against the wall. Arrows indicate securing the frame, with numbers 1 and 2 highlighting attachment points or clips.

Step 3: Illustrates inserting the blue frame into its final position within the wall cavity. Arrows show the frame being pushed into place, with clips or locking mechanisms indicated.

Step 4: Shows the internal cistern mechanism being connected to the frame. Components are shown being slotted or clicked into place.

Step 5: Depicts the water supply connection being made to the cistern. A hose and connector are shown being attached.

Step 6: Illustrates flushing the system. A timer shows 00:00:30, indicating a flush duration. Water is shown flowing into a basin, and a connection is being made to the water inlet pipe.

Step 7: Shows the water inlet connection being secured. A threaded connector is being tightened, with an eye icon suggesting inspection for leaks.

Step 8: Depicts the final tightening of the water inlet connection. A hand icon with a circular arrow indicates rotation for tightening.

Step 9: Illustrates adjustments to the frame or cistern. Arrows indicate upward and downward movement, and symbols show a checkmark (✓) for correct adjustment and a cross (✗) for incorrect.

Step 10: Shows the flush plate mechanism being prepared for attachment. Components are being folded or adjusted.

Step 11: Depicts the mounting plate being attached to the frame. Arrows indicate the direction of placement and securing.

Step 12: Shows precise alignment of the mounting plate. A measurement of "0 mm" is indicated, suggesting flush mounting. Arrows show horizontal and vertical adjustments.

Step 13: Details the attachment of the mounting plate. Part 1 shows a close-up of a locking mechanism. Part 2 shows the plate being angled and secured at 90 degrees.

Step 14: Illustrates attaching the flush plate to the mounting plate. Arrows show insertion and securing. A distance of "2–5 cm" is indicated, possibly for clearance. Recycling symbol and checkmark suggest proper disposal or confirmation.

Step 15: Shows the flush plate being attached. Part 1 shows a close-up of a screw or clip being engaged. Part 2 shows the plate being angled and secured.

Step 16: Depicts final adjustments to the flush plate. Part 1 shows a connection point. Part 2 shows a 90-degree rotation for securing. Part 3 shows the flush plate being attached.

Step 17: Shows the flush plate fully attached. An eye icon suggests visual inspection. A checkmark (✓) indicates successful installation.

Step 18: Illustrates checking the flush plate alignment and function. One diagram shows the plate correctly aligned. Another shows the plate with a "3 mm" gap and screws, suggesting a final adjustment or fixing method.

Step 19: Shows the flush volume settings. One diagram indicates a 6-liter flush (6 l) with an arrow pointing to the larger flush button. Another indicates a 3-liter flush (3 l) with an arrow pointing to the smaller flush button.

Section B: Sigma 8 cm Installation

Step B: Similar to Step A, this shows the flush plate mechanisms and cistern frames, likely for the Sigma 8 cm model.

Step 1: Depicts attaching a blue mounting frame to a wall grid, similar to Step 1 in Section A.

Step 2: Shows the blue frame being positioned against the wall, similar to Step 2 in Section A.

Step 3: Illustrates inserting the blue frame into its final position within the wall cavity.

Step 4: Shows the internal cistern mechanism being connected to the frame.

Step 5: Depicts the water supply connection being made to the cistern.

Step 6: Illustrates flushing the system with a timer and water flow, similar to Step 6 in Section A.

Step 7: Shows the water inlet connection being secured, similar to Step 7 in Section A.

Step 8: Depicts the final tightening of the water inlet connection, with a checkmark (✓) and cross (✗) symbols indicating correct and incorrect states.

Step 9: Shows the flush plate mechanism being prepared for attachment, similar to Step 10 in Section A.

Step 10: Shows the mounting plate being attached to the frame.

Step 11: Depicts precise alignment of the mounting plate with "0 mm" indicated.

Step 12: Details the attachment of the mounting plate, showing a 90-degree securing angle.

Step 13: Illustrates attaching the flush plate to the mounting plate, with arrows indicating movement.

Step 14: Shows the flush plate being attached, with a clearance of "2–5 cm" indicated.

Step 15: Shows the flush plate being attached, with close-ups of securing mechanisms.

Step 16: Depicts final adjustments to the flush plate, including a 90-degree rotation for securing.

Step 17: Shows the flush plate fully attached, with visual inspection indicated.

Step 18: Illustrates checking the flush plate alignment and function, showing flush volumes (6L and 3L) with corresponding button indications.

Cleaning Instructions

Geberit products feature high-quality surfaces. To ensure long-lasting satisfaction, please follow the cleaning instructions provided. These instructions are available in multiple languages throughout the document.

CAUTION: Cleaning agents containing chlorine or acids, as well as corrosive, abrasive, or scouring agents, can damage the surface. Always use only mild cleaning agents and water.

General Cleaning Steps:

1. Clean the product with a soft, damp cloth.
2. Dry the product with a soft cloth.

Specific cleaning instructions are provided in German (DE), English (EN), French (FR), Italian (IT), Dutch (NL), Spanish (ES), Portuguese (PT), Danish (DA), Norwegian (NO), Swedish (SV), Finnish (FI), Icelandic (IS), Polish (PL), Hungarian (HU), Slovak (SK), Czech (CS), Slovenian (SL), Croatian (HR), Serbian (SR), Estonian (ET), Latvian (LV), Lithuanian (LT), Bulgarian (BG), Romanian (RO), Greek (EL), Turkish (TR), Russian (RU), Kazakh (KZ), Chinese (ZH), and Arabic (AR).