AOR 8200PC Computer Control Lead

General

The AR8200PC Computer Control Lead is designed to connect the AOR AR8200 receiver to a computer via its RS-232C serial port. This lead features built-in level shift conversion, enabling computer control of the AR8200.

To control the AR8200, a computer serial port and appropriate software are required. For IBM-PC compatible computers (with 80386 processor or higher), Microsoft Hyper-Terminal or Windows-Terminal (for Windows 3.1x) can be used with the correct serial port parameters.

For advanced capabilities, custom software is recommended. The 'AR8200 Workshop' software package, offering hands-off control, memory management, logging, and spectrum display, can be downloaded free from AOR's internet websites. Additionally, the 'AREX SYSTEM' software package (Japanese only) is available as a free download from the AOR Japan website. Third-party vendors also offer AR8200-compatible software on a commercial basis.

Download resources are available via the following websites:

• Japan: http://www.aorja.com
• UK/Europe: http://www.aoruk.com
• USA/America: http://www.aorusa.com

If internet access or suitable software is unavailable, consider purchasing the CC8200. The CC8200 includes the 8200PC lead and a CD-ROM containing the 'AR8200 Workshop' and other software files.

Connection for RS232 Operation

The option socket is located on the right-hand side of the AR8200 cabinet, beneath the 12V d.c. input socket. It is protected by a rubberised case stopper hinged towards the front of the cabinet. Gently lift the stopper from the rear edge to expose the metallic socket.

Insert one end of the 8200PC cable into the AR8200 option socket. The other end of the cable features a 9-pin D-type RS232 female plug for connection to a PC or other computer. A 9/25 way adapter may be required for some computers.

The level shift interface of the 8200PC lead is powered by the AR8200 receiver. Exercise caution to prevent dust, dirt, or liquid from entering the socket, and ensure no conductive material causes a short circuit, which could damage the receiver.

Diagram Description

The diagram illustrates the physical connection setup. It shows the AR8200PC cable connecting from a computer's serial port (labeled "To serial port (通信ポートへ接続)") to the AR8200 receiver's accessory socket (labeled "To option socket (アクセサリー端子へ接続)"). A CD-ROM package, identified as containing "AR8200 Workshop / AREX SYSTEM" software, is also displayed.

Conventions and Copyright

The term "AR8200" in this document refers to both the AR8200 Series-1 (green cabinet) and AR8200 Series-2 (black cabinet) models.

This manual has been compiled with care to ensure accuracy and currency. However, due to ongoing product development, errors or omissions may occur. This manual is protected by copyright © AOR LTD 2000. No part of this manual may be copied or transferred by any means without the prior written consent of AOR LTD.

AOR and the AOR logo are registered trademarks of AOR, LTD. All other trademarks and names are acknowledged. E&OE (Errors and Omissions Excepted).

© 2000 AOR LTD, Japan.

Company Information

AOR Co., Ltd. (株式会社エーオーアール)

Address: 111-0055 Tokyo, Taito-ku, Misuji 2-6-4

URL: http://www.aorja.com/index-j

TEL: +81-3-3865-1681

FAX: +81-3-3862-9927

e-mail: post@aorja.com

English software "AR8200 Work Shop" and Japanese software "AREX SYSTEM" CD-ROMs can be purchased directly from the company. Please visit the company website for the latest information.