Kidzone Ride-on Bumper Car 360 Rotation (6V)

Product Overview

This manual provides essential safety, performance, and maintenance information for the Kidzone 6V Ride-on Bumper Car 360 Rotation. It is crucial to read this manual before allowing a child to operate the toy. The vehicle is shipped with the battery disconnected and must be connected before use.

Safety Instructions

⚠️ WARNING: Failure to follow safety instructions may result in serious injury or death.

General Safety Precautions

• Protect against electrical shock: Do not immerse cord, charger, transformer, battery, or the product in water or other liquid.
• Use only the provided or manufacturer-recommended charging devices, transformer, and battery.
• Adult assembly is required for children's safety.
• This toy is not intended for children under 18 months.
• Close adult supervision is necessary when children are operating the product.
• Disconnect the battery if not used for a long time.
• Do not use this product as a traffic tool.
• Adult supervision is required to reduce the risk of injury. Never use in roadways, near motor vehicles, on or near steep inclines or steps, swimming pools, or other bodies of water. Always wear shoes. Never allow more than one rider.
• Do not use on slippery surfaces.
• Keep hands, hair, and clothing away from moving parts.
• Maximum user weight: 66 lb / 30 kg.
• Do not change, modify, or add any electrical wiring.
• Charge the battery at least once a month, even if not operating the vehicle, to maximize battery life.
• Avoid using in tight environments to prevent damage or injury.
• Do not use in the dark; operate only during daytime or in well-lit areas.
• Ensure the seat belt is securely fastened when operating.
• Personal protective equipment, such as a helmet, is recommended.

Helmet Fitting

Diagram illustrating correct helmet fitting, showing the helmet covering the forehead. Diagram illustrating incorrect helmet fitting, showing the forehead exposed, which is vulnerable to serious injury.

Friction Hazards

⚠️ WARNING: Friction Hazards! Do not operate on carpets or rugs, as it may cause burn or fire if the product overruns or overspins. The product has an automatic cut-off function for overcurrent or overload. Wait 10-15 seconds for automatic reactivation.

Fire Prevention

• Never modify the electrical system; alterations can cause fire, serious injury, or damage the system.
• Using the wrong type of battery or charger can cause fire or explosion.
• The battery must be handled by adults only. It is heavy and contains sulfuric acid (electrolyte). Dropping it can cause serious injury.
• Never allow children to charge the battery; only adults should charge it.
• Never lift or carry the battery by its wires or connector, as this can damage the battery and cause fire. Lift and carry by the case only.
• Examine the battery, charger, and connectors for wear or damage each time you charge. If damage is detected, do not use until replaced.

Corrosive Material Warnings

Battery posts, terminals, and related accessories contain lead and lead compounds (acids) which are toxic and corrosive. Never open the battery. Contact or exposure to battery leakage (lead acid) may cause serious injury. If contact occurs with skin or eyes, or if swallowed, call 911 immediately.

Flammable and Explosive Materials Warnings

• Use only the supplied rechargeable battery and charger. Using others may cause fire or explosion.
• Do not charge the battery near heat or flammable materials.
• Using the battery and charger for other products may cause overheating, fire, or explosion.
• Contact between positive and negative terminals can cause fire or explosion. Avoid direct contact. Lifting the battery by wires can damage it and cause fire; always lift by the case or handles.
• Plug the charger directly into a wall outlet. Do not use an extension cord, as it can cause a fire.

Electric Shock / Fire Warnings

• Liquids on the battery can cause fire or electric shock. Keep liquids away from the battery and keep it dry.
• Tampering with or modifying the electric circuit system can cause shock, fire, or explosion, and permanently damage the system. Exposed wiring or circuitry in the charger may cause electric shock. Always keep the charger housing closed.
• Regularly check the charger, supply cord, and connector for wear and damage (frayed wires, exposed inner wires, missing insulation). If damage is observed, do not plug in the charger or charge the battery.

Child Safety Warnings

• Adults supervising children must read and understand this entire manual before allowing a child to use the product.
• Adults must evaluate their children's maturity, strength, judgment, and ability to follow safety rules. Age guidelines are not a substitute for individual evaluation.
• Adults must teach children to think ahead while riding, as this may be their first motorized ride-on toy experience. Verbally teach them about steering and avoiding obstacles.
• Riding a motorized ride-on toy is inherently dangerous. Good choices about where and when to ride, constant adult supervision, and careful riding can minimize risk. However, loss of control, falls, or dangerous situations can still occur.
• If this inherent risk is not acceptable, adults should not allow children to ride this toy.

Safe Riding Warnings

• Not to be used by children under 18 months or over 72 months.
• Do not exceed the maximum weight capacity of 66 lb (30 kg).
• Do not allow more than one rider.

Adults and Supervisors Notes

1. Always instruct children on common sense rules and safe practices.
2. Flat, hard surfaces provide the safest experience.
3. Do not allow operation near streets, roads, sidewalks, walkways, or areas with moving vehicles.
4. Never leave children unattended. Continuous adult supervision is required.
5. If necessary, set up gates and barriers to ensure a safe riding environment.
6. Be aware that this ride-on toy has no braking capabilities. Use in areas requiring braking may cause rolls, crashes, serious injury, or death.
7. Teach children not to allow other children to use the toy.
8. Alert children that hands, legs, hair, and clothing can get caught in moving parts. Ensure they never place body parts or clothing near moving parts. Avoid loose clothing.
9. Instruct children to always wear shoes.
10. Confirm children do not have access to charging equipment or the toy while it is charging.
11. Do not mix old and new batteries.
12. Do not mix alkaline, standard (carbon-zinc), or rechargeable batteries.
13. Firmly instruct children to use the toy safely. Unsafe behaviors include: traveling at unsafe speeds, not riding in the seated position, riding at night or in low visibility, riding in wet conditions (rain, snow, ice), stunt riding (jumps, ramps, stairs, hills, sloped surfaces), off-road riding (rough terrain, dirt, mud, gravel), riding near pools or open water, pushing/pulling/shoving the driver, operating with safety covers open, or hitching to other moving toys/products.

Product Warning (California Proposition 65)

⚠️ WARNING: This product can expose you to chemicals, including Lead, known to the State of California to cause birth defects and other reproductive harm, and Di(2-ethylhexyl) phthalate(DEHP), known to cause cancer and birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov.

Assembly Warnings

• The ride-on toy must be assembled by an adult who has read and understands this manual.
• The toy contains small parts intended for adult assembly only. Keep small children away during assembly.
• Remove and dispose of all protective materials, plastic bags, and packaging before assembly.

Product Specifications

• Motor: 2x15 W
• Battery: DC 6V 4AH
• Charger: 6V 500MA
• Speed: 0.75mph (1.2km/h)
• Suitable Age: 18-72 months
• Maximum User Weight: 66 lb / 30 kg
• Dimension: 28.35" x 28.35" x 16.93" (72x72x43cm)
• Battery Charging Time: 8-12 hours
• First Charging Time: 4-5 hours
• Max Charging Time: 12 hours
• Battery Temperature Tolerance: 104°F

Parts and Features

Diagram of the Kidzone bumper car with numbered callouts pointing to different parts:

• 1. Vehicle Body
• 2. Seat Cover
• 3. Seat Belt
• 4. Control Stick
• 5. Light Button
• 6. Power Button
• 7. Charging Port

A separate diagram shows the Remote Control (8).

User Instructions

Before Activating this Vehicle

• Unscrew to detach the seat cover.
• Connect the battery terminal: Red terminal connects with Red connector, Black terminal connects with Black connector.
• Attach the seat cover and tighten the screws.

Charging the Battery

⚠️ WARNING: The battery should only be charged by adult.

• The vehicle must be OFF when charging.
• Plug the charger into the charging port. The charger indicator turns red when charging and green after charging is completed.
• Fully charge the battery for 8-12 hours.
• The battery is not replaceable.
• ⚠️ WARNING: Do not charge the battery for more than 20 hours.
• ⚠️ WARNING: Make sure the battery and charger are not damaged. Do not charge if any sign of wear or damage is found.
• Charge the battery at least once a month, even when not operating the vehicle, to maximize battery life.

Operating this Vehicle (Manual Control)

• Turn On: Press the power switch "I". Turn Off: Press the power switch "O".
• Lights: Press the light symbol switch.
• Forward: Push both control sticks forward simultaneously.
• Backward: Pull both control sticks backward simultaneously.
• Left Turn Forward: Push the right control stick forward.
• Right Turn Forward: Push the left control stick forward.
• Left Turn Backward: Pull the right control stick backward.
• Right Turn Backward: Pull the left control stick backward.
• Left Spin: Pull the left control stick backward and push the right control stick forward simultaneously.
• Right Spin: Push the left control stick forward and pull the right control stick backward simultaneously.
• Stop: Release both control sticks to their center position.

Using the Remote Control

The remote control should only be used by an adult. The remote control overrides the manual control from the vehicle.

Frequency Matching

To activate this vehicle, match the remote control frequency to the vehicle the first time or after changing batteries.

• Insert batteries into the remote control.
• Press the "M" button for 2-4 seconds; the red indicator will flash.
• Turn on the power of the vehicle; the indicator changes to solid red.
• If matching fails, remove and replace the batteries in the remote control and repeat the steps.
• Note: The remote control enters sleep mode after 10 seconds of idle time.

Change Battery (Remote Control]

• Remove the cover on the back of the controller and insert two AAA (LR03) batteries in correct polarity.
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc), or rechargeable batteries.

Controlling the Vehicle (Remote Control)

• For your child's safety, ensure the seat belt is securely fastened.
• Forward: Press the up arrow switch.
• Backward: Press the down arrow switch.
• Left Turn Forward: Press the up arrow switch followed by the left arrow switch.
• Right Turn Forward: Press the up arrow switch followed by the right arrow switch.
• Left Turn Backward: Press the down arrow switch followed by the left arrow switch.
• Right Turn Backward: Press the down arrow switch followed by the right arrow switch.
• Left Spin: Press the left arrow switch.
• Right Spin: Press the right arrow switch.
• Stop: Release all switches.
• Emergency Brake: Press the "P" switch; all 3 red lights flash and all switches stop working. Press the "P" switch again to activate the vehicle.
• Note: The remote control enters sleep mode after 10 seconds of idle time.

⚠️ WARNING: Closely adult supervision is needed when children are operating the vehicle.

Care and Maintenance

• Check the product regularly for missing or loose parts. Re-tighten any loose parts if necessary.
• Ensure there are no cracked or broken plastic parts.
• Keep the product away from heat and humid areas. Cover it with a tarp when not in use.
• Disconnect the battery if the product is not used for a long period.
• Clean the product with a cloth. Use furniture non-wax polish to restore shininess. Do not use abrasive cleaners.
• Do not wash the product with a hose or immerse any parts in water or other liquid.
• Occasionally use lightweight oil to lubricate moving parts.

Troubleshooting

FCC Compliance and Safety Standards

Model: TX4

FCC ID: 2AJ2H-WYTX4

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radiofrequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio or television reception. The user is encouraged to try to correct interference by one or more of the following measures: Reorient or relocate the receiving antenna; Increase the separation between the equipment and the receiver; Connect the equipment into an outlet on a circuit different from that to which the receiver is connected; Consult the dealer or an experienced radio/TV technician for help.

Caution: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This product conforms to toy safety standards CPSIA and ASTM-F963.

Importer: ONE BIG OUTLET

Importer Address: 19301 E Walnut dr. N. City of industry CA91748 united states

Importer Tel.: 800-946-6151