VE-PG3/4 to Icom Portable Radio Cable Diagram
This document provides a diagram and details for creating a cable to connect a VE-PG3 unit to an Icom portable radio.
VEPG3/VE-PG4 TRX/EXT Port Connectors
The diagram illustrates the interface between an Icom Transceiver and a VE-PG3 unit. The transceiver features connections for a microphone (Mic 2.5mm) and a speaker (Speaker 3.5mm).
The VE-PG3 unit utilizes a connector with pins designated as A and B, with specific pin numbers 1 through 4 indicated for each.
Wiring Details
- The microphone input from the transceiver is routed to specific pins on the VE-PG3 connector, including pins A1, A3, and A4.
- The speaker output from the transceiver is routed to specific pins on the VE-PG3 connector, including pins B1 and B4.
- A 33k Ohm resistor is incorporated into the cable's wiring path between certain connection points.
The specific connector used for this setup is identified by the Part Number (P/N) 6910023760.
Connector Image Description
An image displays the connector with the Part Number (P/N) 6910023760. This connector is designed for TRX/EXT ports and shows multiple wires extending from it, facilitating the connection.
