AXIS TM1901 Wireless Kit Installation Guide

Legal Considerations

Video and audio surveillance can be regulated by laws that vary from country to country. Check the laws in your local region before using this product for surveillance purposes.

This product is subject to export control regulations, and you should always comply with all applicable national and international export or re-export control regulations.

Liability

Every care has been taken in the preparation of this document. Please inform your local Axis office of any inaccuracies or omissions. Axis Communications AB cannot be held responsible for any technical or typographical errors and reserves the right to make changes to the product and manuals without prior notice. Axis Communications AB makes no warranty of any kind with regard to the material contained within this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Axis Communications AB shall not be liable nor responsible for incidental or consequential damages in connection with the furnishing, performance or use of this material. This product is only to be used for its intended purpose.

Intellectual Property Rights

Axis AB has intellectual property rights relating to technology embodied in the product described in this document. In particular, and without limitation, these intellectual property rights may include one or more of the patents listed at axis.com/patent and one or more additional patents or pending patent applications in the US and other countries.

Equipment Modifications

This equipment must be installed and used in strict accordance with the instructions given in the user documentation. This equipment contains no user-serviceable components. Unauthorized equipment changes or modifications will invalidate all applicable regulatory certifications and approvals.

Trademark Acknowledgements

AXIS COMMUNICATIONS, AXIS, ARTPEC and VAPIX are registered trademarks of Axis AB in various jurisdictions. All other trademarks are the property of their respective owners.

Regulatory Information

Europe

This product is restricted to indoor use only. This product complies with the applicable CE marking directives:

• Electromagnetic Compatibility (EMC) Directive 2014/30/EU.
• Radio Equipment Directive (RED) 2014/53/EU.
• Low Voltage Directive (LVD) 2014/35/EU.
• Restriction of Hazardous Substances (RoHS) Directive 2011/65/EU and 2015/863, including any amendments, updates or replacements.

A copy of the original declaration of conformity may be obtained from Axis Communications AB. See Contact information on page 5.

Electromagnetic Compatibility (EMC)

This equipment has been designed and tested to fulfill applicable standards for:

• Radio frequency emission when installed according to the instructions and used in its intended environment.
• Immunity to electrical and electromagnetic phenomena when installed according to the instructions and used in its intended environment.

USA

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. This device may not cause harmful interference, and 2. this device must accept any interference received, including interference that may cause undesired operation.

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense. The product shall be properly grounded.

Canada

This digital apparatus complies with CAN ICES-3 (Class A). The product shall be properly grounded. Cet appareil numérique est conforme à la norme CAN NMB-3 (classe A). Le produit doit être correctement mis à la terre.

This device complies with Innovation, Science and Economic Development Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. This device complies with IC radiation exposure limits for an uncontrolled environment. This device for operation in the frequency band 5150-5250 MHz is only for indoor use to reduce the potential for harmful interference to co-channel mobile satellite systems.

Radio Transmission

This radio equipment operates at 2.4 and 5 GHz, with a maximum output power of 17 dBm. This product is restricted to indoor use only. This equipment may generate or use radio frequency energy. The user could lose the authority to operate this equipment if an unauthorized change or modification is made.

This product complies with FCC radiation exposure limits for an uncontrolled environment.

Contact Information

Axis Communications Inc.
300 Apollo Drive
Chelmsford, MA 01824
United States of America
Tel: +1 978 614 2000

Axis Communications AB
Gränden 1
223 69 Lund
Sweden
Tel: +46 46 272 18 00
Fax: +46 46 13 61 30
axis.com

Warranty Information

For information about Axis' product warranty and thereto related information, go to axis.com/warranty.

Support

Should you require any technical assistance, please contact your Axis reseller. If your questions cannot be answered immediately, your reseller will forward your queries through the appropriate channels to ensure a rapid response. If you are connected to the Internet, you can:

• Find answers to resolved problems in the FAQ database, search by product, category, or phrase.
• Report problems to Axis support staff by logging in to your private support area.
• Chat with Axis support staff.
• Visit Axis Support at axis.com/support.

Learn More!

Visit Axis learning center axis.com/learning for useful trainings, webinars, tutorials and guides.

Safety Information

Hazard Levels

⚠️ DANGER: Indicates a hazardous situation which, if not avoided, will result in death or serious injury.

❗ WARNING: Indicates a hazardous situation which, if not avoided, could result in death or serious injury.

? CAUTION: Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.

ℹ️ NOTICE: Indicates a situation which, if not avoided, could result in damage to property.

Other Message Levels

⭐ Important: Indicates significant information which is essential for the product to function correctly.

? Note: Indicates useful information which helps in getting the most out of the product.

Safety Instructions

NOTICE

• The Axis product shall be used in compliance with local laws and regulations.
• Store the Axis product in a dry and ventilated environment.
• Avoid exposing the Axis product to shocks or heavy pressure.
• Do not install the product on unstable poles, brackets, surfaces or walls.
• Use only applicable tools when installing the Axis product. Using excessive force with power tools could cause damage to the product.
• Do not use chemicals, caustic agents, or aerosol cleaners.
• Use only accessories that comply with the technical specification of your product. These can be provided by Axis or a third party. Axis recommends using Axis power source equipment compatible with your product.
• Use only spare parts provided by or recommended by Axis.
• Do not attempt to repair the product yourself. Contact Axis support or your Axis reseller for service matters.

Transportation

NOTICE

• When transporting the Axis product, use the original packaging or equivalent to prevent damage to the product.

Installation Steps

Kit Contents

The kit includes the following items:

• 1x Wireless Adapter ?
• 1x Power Adapter
• 1x Power Cable

Step 1.1: Connect Wireless Adapter

Insert the wireless adapter into the designated port on the AXIS TM1901 Wireless Kit device.

Step 1.2: Connect Power Cable

Connect the power cable to the power adapter. [Power symbol ⚡]

Step 1.3: Connect Power Adapter to Device

Connect the power adapter to the AXIS TM1901 Wireless Kit device. Ensure a secure connection. [Correct connection: ✔️] Do not use force or insert foreign objects. [Incorrect connection: ❌]

Step 1.4: Connect Network Cable and Power On

Connect the network cable to the device. An indicator light on the device will show its status. [Information icon ℹ️]

Step 1.5: Further Information

For detailed user information, refer to the AXIS M1075-L User Manual. You can find it online.

Product Information

Version: M2.3

Date: January 2023

Part No.: 2712990