Introduction
This Installation Guide provides instructions for installing the AXIS Q6135-LE PTZ Network Camera. Please read it carefully before installation and keep it for future reference.
Legal and Regulatory Information
Legal Considerations
Video surveillance laws vary by country. Check your local region's laws before using this product for surveillance.
Licenses
This product includes licenses for H.264 and H.265 decoders. Additional licenses can be purchased from your reseller.
Liability
Axis Communications AB is not liable for technical or typographical errors and reserves the right to make changes without notice. No warranty is made regarding the material, including implied warranties of merchantability and fitness for a particular purpose. Axis Communications AB is not liable for incidental or consequential damages. The product must be used only for its intended purpose.
Intellectual Property Rights
Axis AB holds intellectual property rights for the product's technology, including patents listed at axis.com/patent. The product may contain licensed third-party software; details are in the user interface's "About" section. Source code is available under the Apple Public Source License 2.0 at opensource.apple.com/apsl.
Equipment Modifications
Install and use this equipment strictly according to the user documentation. It contains no user-serviceable components. Unauthorized modifications will void regulatory certifications.
Trademarks
AXIS COMMUNICATIONS, AXIS, and VAPIX are registered trademarks of Axis AB. Other company names and products are trademarks of their respective holders, including Apple, Apache, Bonjour, Ethernet, Internet Explorer, Linux, Microsoft, Mozilla, Real, SMPTE, QuickTime, UNIX, Windows, WWW, Java, UPnP, microSD, microSDHC, and microSDXC.
Regulatory Compliance
Europe: Complies with CE marking directives (EMC 2014/30/EU, LVD 2014/35/EU) and RoHS Directive (2011/65/EU, 2015/863). Declaration of conformity available from Axis Communications AB.
Electromagnetic Compatibility (EMC): Designed and tested to meet standards for radio frequency emission and immunity when installed and used as instructed.
USA: Complies with FCC Rules Part 15. Operation is subject to conditions: no harmful interference and acceptance of received interference. Tested as a Class A digital device using shielded network cable (STP), providing reasonable protection against harmful interference in commercial environments. May cause interference in residential areas. Requires a properly grounded STP cable.
Canada: Complies with CAN ICES-3 (Class A). Requires a properly grounded STP cable.
Australia/New Zealand: Complies with AS/NZS CISPR 32 Class A RF emission limits. Requires a properly grounded STP cable. May cause RF interference in domestic environments.
Japan: Class A device (VCCI-A). May cause RF interference domestically. Requires a shielded network cable (STP) and proper grounding. Internet connection must be via a router.
Korea: Intended for business environments; may cause RF interference domestically. Use a properly grounded shielded twisted pair (STP) cable.
Safety Information
Hazard Levels
DANGER: Hazardous situation, risk of death or serious injury.
WARNING: Hazardous situation, risk of death or serious injury.
CAUTION: Hazardous situation, risk of minor or moderate injury.
NOTICE: Hazardous situation, risk of property damage.
Important Information
Important: Essential information for correct product operation.
Note: Useful information for optimal product use.
Safety Instructions
WARNING: IR emitted from this product. Do not stare at the operating lamp.
- Use the product in compliance with local laws and regulations.
- Axis recommends using a shielded network cable (STP) of CAT6 category or higher.
- Store the product in a dry, ventilated environment.
- Avoid shocks, heavy pressure, or exposing the product to extreme temperatures.
- Do not install on unstable poles, brackets, surfaces, or walls.
- Use only appropriate tools. Excessive force with power tools can damage the product.
- Do not use chemicals, caustic agents, or aerosol cleaners. Use a clean cloth dampened with pure water for cleaning.
- Use only accessories that comply with technical specifications and are provided or recommended by Axis.
- Do not attempt to repair the product yourself. Contact Axis support or your reseller for service matters.
- Do not point the camera lens directly at the sun or other high-intensity radiation sources, as this can cause damage.
- Use a yellow/green grounding cable of at least 0.5 mm² or 20 AWG.
Transportation
NOTICE: Use original packaging or equivalent to prevent damage during transport.
Battery
The product uses a 3.0 V BR2032 lithium battery for its internal real-time clock (RTC), typically lasting at least five years. Low battery power can cause the RTC to reset. A log message will appear in the product's server report when the battery voltage is low. Contact Axis support if a battery change is requested. Lithium coin cells contain 1,2-dimethoxyethane; ethylene glycol dimethyl ether (EGDME).
Dome Cover
NOTICE: Be careful not to scratch, damage, or leave fingerprints on the dome cover, as this can decrease image quality. Keep the protective plastic on until installation is complete. Do not clean a seemingly clean dome cover or polish its surface. For general cleaning, use a non-abrasive, solvent-free neutral soap or detergent mixed with pure water and a soft, clean cloth. Rinse with lukewarm water and dry with a soft cloth. Avoid harsh detergents, gasoline, benzene, acetone, or similar chemicals. Do not clean in direct sunlight or at elevated temperatures.
Installation Steps
The following describes the physical installation process based on the diagrams:
- Step 1: The camera and an RJ45 Push-pull connector are shown with quantity indicators (1x each).
- Step 1.1: Insert a microSD card into the camera.
- Step 1.2: Carefully remove the outer lens/dome assembly.
- Step 1.3: Access internal connection points by releasing a latch.
- Step 1.4: Further remove the outer lens/dome assembly.
- Step 1.5: Rotate and secure the lens assembly, engaging a locking mechanism.
- Step 2.1: Attach and rotate the lens assembly into place, connecting internal components.
- Step 2.2: Secure the camera with three T30 screws, torqued to 5 Nm (3.7 lb ft). Note IR emission warning.
- Step 2.3: Connect the RJ45 network cable. Observe IR emission warning: do not stare at the lamp for more than 60 seconds at a distance of 50 cm.
- Step 2.4: Remove and dispose of the protective film from the lens. Installation complete.
Contact Information
Axis Communications AB
Emdalavägen 14
223 69 Lund
Sweden
Tel: +46 46 272 18 00
Fax: +46 46 13 61 30
axis.com
Warranty and Support
Warranty: For warranty information, visit axis.com/warranty.
Support: For technical assistance, contact your Axis reseller. Online resources include user documentation, software updates, FAQ database, and support portals at axis.com/support.
Learn More: Visit axis.com/academy for trainings, webinars, tutorials, and guides.
