AXIS P3818-PVE Installation Guide

Version M1.3 | Date: March 2021 | Part No. 2282854

Introduction

Read this Installation Guide carefully before installing the product. Keep the guide for future reference.

Legal Considerations

Video and audio surveillance is subject to laws that vary by country. Check local laws before using this product for surveillance purposes.

Licenses Included:

One (1) AAC decoder license
One (1) H.264 decoder license
One (1) H.265 decoder license
One (1) MPEG-4 Part 2 decoder license

To purchase additional licenses, contact your reseller.

Liability

Axis Communications AB is not responsible for technical or typographical errors and reserves the right to make changes without prior notice. Axis Communications AB disclaims all warranties, express or implied, including warranties of merchantability and fitness for a particular purpose. Axis Communications AB shall not be liable for incidental or consequential damages. This product is intended for its designated purpose only.

Intellectual Property Rights

Axis AB holds intellectual property rights for the technology in this product, including patents listed at axis.com/patent. The product also contains licensed third-party software; details are available in the user interface under "About". Source code copyright Apple Computer, Inc. is included under the Apple Public Source License 2.0.

Equipment Modifications

Install and use this equipment strictly according to the user documentation. The equipment contains no user-serviceable components. Unauthorized modifications will invalidate regulatory certifications and approvals.

Trademark Acknowledgements

AXIS COMMUNICATIONS, AXIS, ARTPEC, and VAPIX are registered trademarks of Axis AB. Other trademarks belong to their respective owners. This includes trademarks from Apple, Apache, Bonjour, Ethernet, Internet Explorer, Linux, Microsoft, Mozilla, Real, SMPTE, QuickTime, UNIX, Windows, WWW, Java, Oracle, and Open Connectivity Foundation. microSD, microSDHC, and microSDXC are trademarks of SD-3C LLC.

Regulatory Information

Europe

This product complies with CE marking directives and harmonized standards, including EMC Directive 2014/30/EU, Low Voltage Directive (LVD) 2014/35/EU, and RoHS Directives 2011/65/EU and 2015/863. A copy of the declaration of conformity is available from Axis Communications AB.

Electromagnetic Compatibility (EMC)

This equipment is designed and tested to meet applicable standards for radio frequency emission and immunity when installed and used as instructed.

USA

This device complies with Part 15 of the FCC Rules. Operation is subject to two conditions: (1) it must not cause harmful interference, and (2) it must accept any interference received. This equipment has been tested as a Class A digital device and complies with FCC limits for commercial environments. It may cause interference in residential areas, requiring the user to correct it at their own expense. The product must be connected using a properly grounded shielded network cable (STP).

Canada

This digital apparatus complies with CAN ICES-3 (Class A). Connection requires a properly grounded shielded network cable (STP).

Europe (RF Emission)

This digital equipment meets Class A RF emission limits of EN 55032. Connection requires a properly grounded shielded network cable (STP). Note: This is a Class A product; it may cause RF interference in domestic environments.

Australia/New Zealand

This digital equipment meets Class A RF emission limits of AS/NZS CISPR 32. Connection requires a properly grounded shielded network cable (STP). Note: This is a Class A product; it may cause RF interference in domestic environments.

Japan

This is a Class A device. Operation in a residential environment may cause radio interference, requiring the user to take adequate measures. VCCI-A compliance. Use a shielded network cable (STP) and ensure proper grounding. Connection to public telecommunication lines is not permitted; use a router for internet connection.

Korea

This is an equipment certified for business environments; it may cause radio interference in home environments. Use a properly grounded STP cable for connection.

China

This product complies with SJ/T 11364-2014 for marking the restriction of hazardous substances.

Hazardous Substances Table:

Component Name	Lead (Pb)	Mercury (Hg)	Cadmium (Cd)	Hexavalent Chromium (Cr-VI)	PBB	PBDE
Electrical mounting parts	X	0	0	0	0	0

0: Content of hazardous substance is below the GB/T 26572 limit. X: Content of hazardous substance exceeds the GB/T 26572 limit.

Safety

This product complies with IEC/EN/UL 62368-1 (audio/video and IT equipment safety) and IEC/EN/UL 60950-22 (Information Technology Equipment safety). When using Power over Ethernet (PoE), the Power Sourcing Equipment (PSE) must comply with IEEE 802.3af and Limited Power Source (LPS) requirements.

Axis recommends using Axis midspans or Axis PoE switches.

Disposal and Recycling

Dispose of this product according to local laws and regulations at the end of its useful life. Contact your local authority for designated collection points. In the EU, Directive 2012/19/EU (WEEE) applies. Dispose of in an approved, environmentally safe recycling process. Businesses should contact the supplier for disposal information.

This product complies with RoHS Directives 2011/65/EU and 2015/863.

Contact Information

Axis Communications AB
Gränden 1
223 69 Lund
Sweden

Tel: +46 46 272 18 00
Fax: +46 46 13 61 30
Website: axis.com

Axis Communications Inc.
300 Apollo Drive
Chelmsford, MA 01824
United States of America
Tel: +1 978 614 2000

Warranty and Support

Warranty Information

For warranty information, visit axis.com/warranty.

Support

For technical assistance, contact your Axis reseller. If your questions cannot be answered immediately, your reseller will forward them. If connected to the Internet, you can:

Download user documentation and software updates.
Find answers in the FAQ database (search by product, category, or phrase).
Report problems via your private support area.
Chat with Axis support staff.
Visit Axis Support at axis.com/support.

Learn More

Visit Axis learning center at axis.com/learning for trainings, webinars, tutorials, and guides.

Package Contents

The package contains the following items:

1x AXIS P3818-PVE camera unit
1x Mounting base
1x Hex key
1x Dome cover
2x Cable glands
2x Mounting screws/anchors

Installation

1. Preparation

1.1 Remove Dome Cover: Lift the dome cover off the camera base. This requires removing 4x TR20 screws.

1.2 Remove Mounting Bracket: Detach a mounting bracket from the camera base. This involves removing 2 screws.

1.3 Remove Component: Remove another component from the camera base, secured by 2x TR20 screws.

2. Mounting Preparation

2.1 Prepare for Mounting: Identify mounting points on the camera base. Use a pencil to mark the location, a drill to create holes, and appropriate screws/anchors. A warning symbol indicates the need to use the correct screw type and length to avoid damaging the product.

2.2 & 2.3 Attach Cover: Illustrations show a protective cover piece being attached to the camera base in two steps.

3. Camera Mounting

3.1 Mount Camera Body: Mount the camera body onto the prepared surface using screws/anchors. Icons for pencil, drill, and screws are shown, along with a warning symbol regarding screw selection.

4. Storage and Connections

4.1 Insert microSD Card: Insert a microSD, microSDHC, or microSDXC card into the designated slot labeled "microSD/-SDHC/-SDXC". An inset view shows the camera base with the microSD card slot.

5. Connections and Assembly

5.1 Connect Network Cable: Connect the RJ45 network cable to the camera's network port. Illustrations show the preparation of the network cable and its connection, with a warning symbol for proper cable management.

5.2 Connect Microphone and I/O: Connect the microphone (?) and I/O cables as shown in the diagrams. Illustrations detail the connection process and cable management.

5.3 Secure Component: Secure a component to the camera using 2x TR20 screws, torqued to 1.0 N m (0.7 lb ft).

5.4 Grounding Connection: Connect the grounding wire to the camera base using a screw, torqued to 1.0 N m (0.7 lb ft). A ground symbol (⏚) is shown.

5.5 Close Camera: Close the camera by placing the dome cover onto the base.

5.6 Software: Icons for "AXIS IP Utility" and "AXIS Camera Management" are displayed on a monitor, indicating software for configuration.

5.7 Attach Dome Cover: Attach the dome cover to the camera.

5.8 Adjust View: Adjust the camera's field of view using the internal mechanism, as indicated by arrows on the camera and a monitor display.

5.9 Adjust View: Further adjustment of the camera's internal mechanism is shown.

5.10 Final Dome Attachment: Attach the dome cover to the camera base using 4x TR20 screws, torqued to 1.0 N m (0.7 lb ft).

6. Disposal

6.1 Disassembly and Disposal: The camera can be disassembled for disposal. A recycling bin symbol (♻️) indicates proper disposal. A checkered flag symbol (?) signifies the end of the installation process.

7. Maintenance and Disposal

7.1 Dome Cover Removal for Disposal: The dome cover can be removed for disposal by unscrewing 2x TR20 screws. A recycling bin symbol (♻️) is shown.

7.2 Dome Cover Reattachment: Reattach the dome cover using 2x TR20 screws, torqued to 1.0 N m (0.7 lb ft). A recycling bin symbol (♻️) is shown.

Safety Information

Hazard Levels:

DANGER: Hazardous situation, if not avoided, results in death or serious injury.
WARNING: Hazardous situation, if not avoided, could result in death or serious injury.
CAUTION: Hazardous situation, if not avoided, could result in minor or moderate injury.
NOTICE: Situation, if not avoided, could result in property damage.

Other Message Levels:

Important: Essential information for correct product function.
Note: Useful information for optimal product use.

Safety Instructions:

Use the product in compliance with local laws and regulations.
Store in a dry, ventilated environment.
Avoid shocks, heavy pressure, and vibration.
Do not install on unstable or vibrating poles, brackets, surfaces, or walls.
Use only applicable tools; excessive force with power tools can cause damage.
Do not use chemicals, caustic agents, or aerosol cleaners.
Clean with a soft cloth dampened with pure water.
Use only compatible accessories and spare parts recommended by Axis.
Do not attempt self-repair; contact Axis support or reseller.
Power supply must be plugged into a nearby, accessible socket outlet.
Use a Limited Power Source (LPS) with output limited to 100 W and 5 A.

Transportation:

Keep protective packaging. Replace it in its original position when transporting. Use original or equivalent packaging to prevent damage.

Battery:

The product uses a 3.0 V BR2032 lithium battery for its internal real-time clock (RTC). Battery life is typically five years. Low battery may cause RTC resets. A log message will appear when battery voltage is low.
CAUTION: Do not replace the battery yourself. Contact Axis support if prompted.
Lithium coin cell batteries contain 1,2-dimethoxyethane; ethylene glycol dimethyl ether (EGDME).

Dome Cover:

Be careful not to scratch, damage, or leave fingerprints on the dome cover, as this can reduce image quality. Keep protective plastic on until installation is complete.
Do not clean a cover that appears clean, and never polish the surface. Excessive cleaning can cause damage.
For general cleaning, use a non-abrasive, solvent-free neutral soap or detergent mixed with pure water and a soft, clean cloth. Rinse with lukewarm water and dry with a soft cloth to prevent water spots.
Never use harsh detergents, gasoline, benzene, acetone, or similar chemicals.
Avoid cleaning in direct sunlight or at elevated temperatures.

	AXIS P3807-PVE Network Camera - Podręcznik Użytkownika i Konfiguracja Szczegółowy podręcznik użytkownika i przewodnik konfiguracji dla kamery sieciowej AXIS P3807-PVE. Dowiedz się o instalacji, ustawieniach, rozwiązywaniu problemów i specyfikacjach technicznych.
	AXIS Q1686-DLE Radar-Video Fusion Camera Installation Guide This document provides a comprehensive installation guide for the AXIS Q1686-DLE Radar-Video Fusion Camera. It covers essential safety information, legal considerations, regulatory compliance, and detailed step-by-step instructions for mounting and setting up the device.
	AXIS P47 Panoramic Camera Series Installation Guide Comprehensive installation guide for the AXIS P47 Panoramic Camera Series, including AXIS P4705-PLVE and AXIS P4707-PLVE models. Covers safety, legal considerations, installation steps, and product features.
	Axis M10 Network Camera Series Installation Guide Comprehensive installation guide for Axis M10 Network Camera Series, including models M1045-LW and M1065-LW. Covers setup, safety, regulatory compliance, and basic troubleshooting.
	AXIS Q1656-LE Box Camera User Manual This user manual provides comprehensive instructions for the AXIS Q1656-LE Box Camera, covering installation, configuration, and operational details. Learn how to set up your camera, optimize image quality, and utilize advanced features for effective surveillance.
	AXIS Camera Station 5 User Manual Comprehensive user manual for AXIS Camera Station 5, covering installation, configuration, and operation for small to medium-sized video surveillance and recording installations. Includes quick start guide, system features, video tutorials, and troubleshooting.
	AXIS P14-LE Bullet Camera Series User Manual Comprehensive user manual for AXIS P14-LE Bullet Camera Series, covering installation, configuration, image settings, streaming, storage, and troubleshooting for AXIS P1467-LE and AXIS P1468-LE models.
	AXIS Camera Station 5 Uživatelská příručka Tato uživatelská příručka poskytuje podrobné informace o softwaru AXIS Camera Station 5, včetně jeho instalace, konfigurace a správy. Zahrnuje pokyny pro nastavení systému, správu uživatelů, konfiguraci nahrávání, monitorování systému a řešení problémů.