Night Owl Wi-Fi NVR Security System

Thank you for being a Night Owl Customer! Secure, Protect, Connect your world!

This Quick Setup Guide (QSG) addresses the setup of your Wi-Fi NVR (Network Video Recorder) and cameras. While Night Owl makes every effort to provide accurate information, inaccuracies or errors may occur. Night Owl reserves the right to make changes, corrections, and/or improvements to the information and products at any time without notice.

DISCLAIMER: The exact components of your system, images, and quantities may vary depending on your model number. While these may vary, this QSG addresses the setup of your WNVR and cameras.

NOTE: If connecting to a TV or Monitor, it must have a minimum resolution of 1080p HD.

Use all of the included Night Owl accessories. Third-party accessories may not work correctly.

Items Not Included

• Monitor
• Router / Network Access Point
• SURGE PROTECTOR (NOT INCLUDED)

What's in the Box

• WNVR
• WNVR Power Adapter (x1)
• 6 ft. HDMI (x1)
• 6 ft. Ethernet (x1)
• USB Mouse (x1)
• WNVR Antenna (x2)

Compatible Devices

Your Wi-Fi NVR is compatible with multiple Night Owl® Wi-Fi devices. The Wi-Fi devices included with your system will vary based on your model number. Please scan the QR Code for more information on all compatible Wi-Fi devices, including setup instructions. https://scnv.io/j86E

▲ WARNING INGESTION HAZARD: This product contains a button cell or coin battery. DEATH or serious injury can occur if ingested. A swallowed button cell or coin battery can cause internal chemical burns in as little as 2 hours. Keep new and used batteries OUT OF REACH OF CHILDREN. Seek immediate medical attention if a battery is suspected to be swallowed or inserted inside any part of the body.

Caution:

• Remove and immediately recycle or dispose of used batteries according to local regulations and keep away from children. Do NOT dispose of batteries in household trash or incinerate.
• Even used batteries may cause severe injury or death. Call a local poison control center for treatment information.
• Non-rechargeable batteries are not to be recharged.
• Do not force discharge, recharge, disassemble, heat above (manufacturer's specified temperature rating) or incinerate. Doing so may result in injury due to venting, leakage or explosion resulting in chemical burns.

"The product contains non-replaceable batteries."

"Battery type: CR2032"

"Battery nominal voltage: 3V"

FCC RADIATION NORM

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Compliance Statement These limits are designed to provide reasonable protection against frequency interference in residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed or used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in television reception, which can be determined by turning the equipment off and on. The user is encouraged to try and correct the interference by or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

CAUTION!

The Federal Communications Commission warns that changes or modifications to the unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment should be installed and operated with a minimum distance of 8 inches between the radiator and your body.

iPhone, iPad, Mac and Mac OS X are registered trademarks of Apple Inc. Windows, Windows XP, Windows Vista, Windows 7, Windows 8 and Windows 10 are registered trademarks of Microsoft Corporation in the United States and/or other countries.

Step 1: Connecting Your System

NOTE: Watch our Recorder Setup Video on YouTube.

Option 1: Easy Bluetooth® Wireless Setup

With our easy Bluetooth® wireless setup, no TV / Monitor is required. Once your system is connected using the steps below, you can quickly finish the setup right from the app on your Smart Device. This is the preferred setup method for your system. Please proceed to step 1.

Option 2: Manual Setup (TV / Monitor)

While our easy Bluetooth® wireless setup is preferred, you may still want to locally view your system from a TV / Monitor. The choice is yours based on your setup needs. If you want to connect a TV / Monitor, complete the two steps below then continue to finish connecting your system.

Connect the WNVR power adapter to the Power Input on the rear of the WNVR.

Plug the WNVR power adapter into a surge protector or Uninterruptible Power Supply (UPS).

NOTE: Make sure the UPS or surge protector is switched ON.

Some systems beep upon booting up.

Step 2: Download the Night Owl App

If you're a First Time User, download the Night Owl app from the App Store or Google Play Store onto your Smart Device and verify your account. If you already have an account skip to Step 3.

NOTE: Setup is the same for Smartphone and Tablet.

Step 3: System Configuration

Now that your system's hardware is connected and you have the app setup on your Smart Device, it is time to configure your system. Based on whether you chose Option 1: Easy Bluetooth® Wireless Setup or Option 2: Manual Setup (TV / Monitor), follow the steps below.

Option 1: Easy Bluetooth® Wireless Setup

NOTE: If you have a TV / Monitor connected, you will see setup information appear on the screen as you complete the Bluetooth® setup. A TV / Monitor is not required for this setup, but can be used for viewing.

1. Log in to the app. If your device's Bluetooth® is not enabled, you will be asked to allow access.
2. The app will now use Bluetooth® to find the WNVR. Tap "Continue" to add the WNVR to your Night Owl account.
3. Take a moment to name your recorder.
4. The app will now pair to the WNVR. Once finished, complete the remainder of the Startup Wizard right from the app and begin viewing your cameras.

NOTE: If the WNVR is not connected to the Internet, you will not be able to live view the cameras from the app.

Option 2: Manual Setup (TV / Monitor)

NOTE: Connecting your system and using the Night Owl App is preferred and offers added security benefits and convenience to your mobile lifestyle.

1. We strongly recommend you connect your WNVR to the Internet to search for the latest firmware. Keeping your firmware updated is vital for the overall health of your system. If you are NOT connecting your WNVR to the Internet, please manually upgrade the firmware and register your device.
2. If you have not already done so, connect your WNVR to a TV / Monitor using the provided HDMI cable. Follow the steps in Connecting Your System. You will now begin the Startup Wizard. When you get to the following screen, click "Manual Setup (not recommended)."
3. Proceed through the rest of the Startup Wizard to finish setup. Once complete, click on "Go to Live View" to begin viewing your cameras.

Need Help?

Why call? Our 24/7 online support site has it all!

For system manuals, troubleshooting guides, FAQs, video tutorials and more:

1. Visit Support.NightOwlSP.com
2. Enter the Series listed on the product support sticker into the search bar
3. Access the support material needed

Not Connecting to the Internet?

Night Owl strongly recommends connecting the WNVR to the Internet. If you have decided not to connect, follow the onscreen prompts within the Startup Wizard. Please note that not connecting your WNVR means:

• You must manually update the device's firmware to the latest version to receive Technical Phone Support. The latest firmware version is available on the device's support page on the Night Owl Support Site.
• The WNVR must be registered to receive Technical Phone Support.
• You cannot view your system remotely.
• Resetting your password is a much longer process to ensure security.

Night Owl Technical Support

If you require Technical Support, you should always go to Support.NightOwlSP.com first. With 24/7 access to system manuals, troubleshooting guides, FAQs, video tutorials, and more, you'll have all the support you could need.

Still need more support? Before calling Night Owl Technical Support, keep in mind we can only provide phone support if:

1. You are in front of the device with it powered on.
2. Your device is registered. To register your device, download the Night Owl app, create an account and verify your account.
3. Your device is running the latest firmware version.

For more Support Videos, go to Night Owl's YouTube page by typing www.youtube.com/nightowlsp into your web browser.

Our videos guide you through topics including:

• System Setup
• System Features
• Setting up the App
• App Features

Additional Safety Information

Warning: Even used batteries can cause serious injury or death. For treatment information, contact your local Poison Control Center. This product uses Battery type: CR2032 and has a voltage of 12V. Do not recharge non-rechargeable batteries. Never force, discharge, recharge, disassemble, expose to heat above the manufacturer's specified temperature rating, or incinerate. Doing so may cause injury due to venting, leakage, or explosion, leading to chemical burns.

Additional Safety Information

FCC RADIATION NORM

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Compliance Statement These limits are designed to provide reasonable protection against frequency interference in residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed or used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in television reception, which can be determined by turning the equipment off and on. The user is encouraged to try and correct the interference by or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

CAUTION!

The Federal Communications Commission warns that changes or modifications to the unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment should be installed and operated with a minimum distance of 8 inches between the radiator and your body.

Additional Safety Information

▲ WARNING

INGESTION HAZARD: This product contains a button cell or coin battery. DEATH or serious injury can occur if ingested. A swallowed button cell or coin battery can cause internal chemical burns in as little as 2 hours. Keep new and used batteries OUT OF REACH OF CHILDREN. Seek immediate medical attention if a battery is suspected to be swallowed or inserted inside any part of the body.

Caution:

• Remove and immediately recycle or dispose of used batteries according to local regulations and keep away from children. Do NOT dispose of batteries in household trash or incinerate.
• Even used batteries may cause severe injury or death. Call a local poison control center for treatment information.
• Non-rechargeable batteries are not to be recharged.
• Do not force discharge, recharge, disassemble, heat above (manufacturer's specified temperature rating) or incinerate. Doing so may result in injury due to venting, leakage or explosion resulting in chemical burns.

"The product contains non-replaceable batteries."

"Battery type: CR2032"

"Battery nominal voltage: 3V"

FCC Compliance

FCC RADIATION NORM

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. FCC Compliance Statement These limits are designed to provide reasonable protection against frequency interference in residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if not installed or used in accordance with the instructions, may cause harmful interference to radio communication. However, there is no guarantee that interference will not occur in television reception, which can be determined by turning the equipment off and on. The user is encouraged to try and correct the interference by or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

CAUTION!

The Federal Communications Commission warns that changes or modifications to the unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

This equipment should be installed and operated with a minimum distance of 8 inches between the radiator and your body.

Legal Information

iPhone, iPad, Mac and Mac OS X are registered trademarks of Apple Inc. Windows, Windows XP, Windows Vista, Windows 7, Windows 8 and Windows 10 are registered trademarks of Microsoft Corporation in the United States and/or other countries.