Invery DockLinQ User Manual

Contact Information

Invery is committed to customer service and focuses on customer experiences. For any issues, please contact Invery first. Cases will be assigned a ticket ID for prompt follow-up.

• Email: support@invery.com (Recommended)
• Facebook Messenger: Search "Goinvery" on Facebook.

Trust Invery! We won’t disappoint you!

1. Overview

The DockLinQ is designed to upgrade 30-pin iPod/iPhone music docking stations with Bluetooth audio streaming. It offers high-quality sound and a long Bluetooth wireless range.

Key features:

• Rechargeable Battery
• 30-pin Connector for Charging and Dock Playback
• 3.5mm AUX-out jack
• Upgrades home stereo, car stereo, or wired headphones with Bluetooth audio streaming.

LED Indicator Lights

Battery Charging Indicator Light

• Blue blinking light: Waiting for Bluetooth connection
• Blue constant light: Bluetooth connected

Battery Charging Status

• Red constant light: Battery is charging
• Red light OFF: Battery is fully charged

Battery ON/OFF Switch

Slide the switch button to the right side (OFF position) to prevent battery charging. This is recommended for playing music to prolong battery life when DockLinQ is powered by the 30-pin connector.

Slide the switch button to the left side (ON position) to activate the battery. The battery will charge when DockLinQ is plugged into a 30-Pin docking station.

3.5 mm Aux-out Jack

Use the included aux cable to plug the DockLinQ's Aux-out jack into the Aux-in jack of your home or car stereo for music streaming. It can also be used to connect wired headphones/earphones.

2. FAST SETUP

1. PLUG: Connect DockLinQ to the 30-pin connector.
2. PAIR: Open your phone's Bluetooth settings, search for "DockLinQ", and tap to pair. A constant blue light indicates a successful connection.
3. PLAY: Stream music from your phone to the docking station.

Compatibility Notes

DockLinQ is compatible with most Bose docks. If sound issues occur (no sound, low volume, poor quality), try adjusting DockLinQ's position for better contact with the 30-pin connector. If problems persist, contact support@invery.com.

DockLinQ is not compatible with some digital docks that use a USB channel, such as Bowers & Wilkins Zeppelin. For these docks, use the 3.5mm Aux cable to connect DockLinQ's Aux-out jack to the dock's Aux-in jack for Bluetooth streaming.

3. Playing Music from a Docking Station via 3.5 mm Aux-in jack

Use a 3.5mm Aux cable to connect DockLinQ's Aux-out jack to the docking station's Aux-in jack.

4. Playing Music from Home or Car Stereo with a 3.5 mm Aux-in jack

Use a 3.5mm Aux cable to input audio. Use a 30-pin-to-USB cable to supply power for DockLinQ.

(Invery recommends its Airdual series for car use.)

5. Playing Music with Wired Earphone

Use a 3.5mm Aux cable to connect your wired earphones to DockLinQ, turning them into Bluetooth earphones.

6. Streaming Music from Multi Devices (Dual Link Function)

1. Pair first mobile device: Search for "DockLinQ" in Bluetooth settings and pair.
2. Turn off first mobile device Bluetooth.
3. Pair second mobile device: Search for "DockLinQ" in Bluetooth settings and pair.
4. Re-enable first mobile device Bluetooth: Tap to pair again.

7. Amazon Echo Dot works with DockLinQ

1. Turn OFF the Bluetooth function on your iPhone, iPad, or other mobile device.
2. Connect DockLinQ to a Bose SoundDock and slide the power button to the left to turn on the battery. Place DockLinQ near the Amazon Echo Dot. The blue light will blink.
3. Open the Alexa App on your phone, tablet, or laptop. Tap the 3-line menu icon in the upper left corner.
4. Tap "Settings" on the Home Menu.
5. Tap "Echo Dot" under the Settings Menu.

Product Information

Manufacturer: Guangzhou Invery Technology Co.,Ltd.

Address: 905, A2, Golsun Plaza, Yingbin Avenue, Huadu District Guangzhou Guangdong 510000

CAUTION: RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING TO THE INSTRUCTIONS.

Extreme Temperature: 45°C max

FCC Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

Caution: Any changes or modifications to this device not explicitly approved by the manufacturer could void your authority to operate this equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.