UNC15NPRII

DIMENSIONS AND INSTALLATION INFORMATION (IN INCHES)

DIMENSIONS

Height: 34-1/8" to 34-7/8"

Width: 14-7/8"

Depth: 22-3/4"

Depth including handle is approximately 25 1/2".

NOTE: The finished cut-out is determined by the type of installation. Before installing, consult installation instructions packed with product for current dimensional data.

WARRANTY INFORMATION

• Limited one-year warranty, in-home service, parts and labor.
• Limited five-year warranty, parts and labor on the compressor, evaporator and all connecting tubing.
• See written warranty for complete details.

Diagram Description: The diagram illustrates the required cut-out dimensions for the ice maker installation. It shows a cabinet opening with specific measurements: a height range of 34" to 35", a width of 15", and a depth of 24" minimum. Key features indicated are a floor drain access hole and the path for water and electrical supply entry from the back wall. The ice maker unit itself is shown with its dimensions, including an adjustable height from 34-1/8" to 34-7/8" and a depth of 14-7/8". The depth of the unit is noted as 22-3/4" to an optional SS Door Front, with the 22-3/4" depth including 3/4" for an optional SS panel or custom panel.

INSTALLATION INFORMATION

The ice machine can be used free-standing or as a built-in, under the countertop.

The ice machine requires a 115 Volt or 110 Volt, 60 Hz., AC only power supply, with an individual, properly grounded branch circuit, protected by a 15 amp fuse or circuit breaker.

Pump Kit UPK4 can be installed, which can force drain water up to a maximum of 10 feet, allowing it to be located where a gravity drain isn't available.

To achieve a custom appearance, the ice machine door accepts 3/4" custom panels to coordinate or contrast with cabinetry. Optional door panels and handle kits are available. Order PK1UG150RSS for stainless steel door panel kit with Profile handle. CK1UP150RS1/D1/W2 for stainless steel, matte black and matte white door panel kits with Café handle. ZK1UN150RS for stainless steel door panel kit with Monogram Statement handle. (Monogram handles sold separately - see list of model numbers below).

PANEL AND HANDLE KITS

Panel Kits:

• PK1UG150RSS (Profile)
• CK1UP150RS1/D1/W2 (Café)
• ZK1UN150RS (Monogram)

Handle Kits:

• Brushed Stainless Handle Kit CXQW1H1PPSS
• Brushed Black Handle Kit CXQW1H1PPBT
• Brushed Bronze Handle Kit CXQW1H1PPBZ
• Brushed Copper Handle Kit CXQW1H1PPCU
• Brushed Brass Handle Kit CXQW1H1PPCG
• Flat Black Handle Kit CXQW1H1PPFB
• Minimalist - Brushed SS Handle Kit Monogram ZXGP1H1CPSS
• Statement - Brushed SS Handle Kit Monogram ZXGP1H1PPSS

For answers to your Monogram, GE Café™, GE Profile™, or GE Appliances product questions, visit our website at geappliances.com or call GE Answer Center® Service, 800.626.2000.

FEATURES AND BENEFITS

• Produces Up To 50 Pounds of Ice Per Day*
• Ice Storage Capacity: 26 lbs.
• ADA Compliant: No
• Energy Star: No
• Panel Kit Options: PK1UG150RSS (Profile), CK1UP150RS1/D1/W2 (Café), ZK1UN150RS (Monogram)
• Handle Kit Options: CXQW1H1PPSS, CXQW1H1PPBT, CXQW1H1PPBZ, CXQW1H1PPCU, ZXGP1H1CPSS, ZXGP1H1PPSS, CXQW1H1PPCG, CXQW1H1PPFB
• Drain Pump Kit: Yes (Optional UPK4 available)
• Water Filtration: Inline (GSWF)
• Ice Type: Nugget
• Clean Indicator: Light on unit/app notification alerts when it's time to change water filter
• Filter Indicator: Light on unit/app notification alerts when it's time to change water filter
• Free-standing or Built-In Capable: Yes
• Indoor/Outdoor Capable: Indoor
• Smart Capable: Yes
• Control Type: Cap Touch Electronic Control
• Internal Lighting: LED light
• Soft Touch Ice Scoop: Yes
• Optional door and handle kits available.
• Optional drain pump kit UPK4 is available.
• Model UNC15NPRII - Panel ready

*In a 24 hour period, the icemaker produces up to 50 pounds of ice in a 70 degree ambient/50 degree water temperature, or up to 48 pounds in a 90 degree ambient/70 degree water temperature.