UCC15NPRII: 15" Built-In Gourmet Clear Ice Maker

Dimensions and Installation Information (In Inches)

Dimensions

Height: 34-1/8" to 34-7/8"

Width: 14-7/8"

Depth: 22-3/4"

Depth including handle is approximately 25 1/2".

Note: The finished cut-out is determined by the type of installation. Before installing, consult installation instructions packed with product for current dimensional data.

Warranty Information

Limited One-Year Warranty: Covers in-home service, parts, and labor.*

Limited Five-Year Warranty: Covers parts and labor on the compressor, evaporator, and all connecting tubing.*

*See written warranty for complete details.

Installation Diagram Description

A schematic illustrates installation clearances and connection points. The unit's width is 14-7/8 inches, requiring a 15-inch minimum cut-out width. The unit's depth is 22-3/4 inches, with an additional 3/4 inch allowance for an optional stainless steel or custom door panel, resulting in a total depth of 23-1/2 inches with a panel. Water and electrical supply should enter from the back wall within a shaded area. The unit's height is adjustable from a minimum of 34-1/8 inches to a maximum of 34-7/8 inches. It also indicates a 3-5/8 inch clearance requirement above the unit and a 3-7/8 inch floor drain access hole.

Installation Information

The ice machine can be used free-standing or as a built-in, under the countertop.

It requires a 115 Volt or 110 Volt, 60 Hz., AC only power supply, with an individual, properly grounded branch circuit, protected by a 15 amp fuse or circuit breaker.

The optional Pump Kit UPK4 can be installed, which can force drain water up to a maximum of 10 feet, allowing it to be located where a gravity drain isn't available.

To achieve a custom appearance, the ice machine door accepts 3/4" custom panels to coordinate or contrast with cabinetry. Optional door panels and handle kits are available.

Panel Kits

• PK1UG150RSS (Profile)
• CK1UP150RS1/D1/W2 (Café)
• ZK1UN150RS (Monogram)

Handle Kits

• Brushed Stainless Handle Kit CXQW1H1PPSS
• Brushed Black Handle Kit CXQW1H1PPBT
• Brushed Bronze Handle Kit CXQW1H1PPBZ
• Brushed Copper Handle Kit CXQW1H1PPCU
• Brushed Brass Handle Kit CXQW1H1PPCG
• Flat Black Handle Kit CXQW1H1PPFB
• Minimalist - Brushed SS Handle Kit Monogram ZXGP1H1CPSS
• Statement - Brushed SS Handle Kit Monogram ZXGP1H1PPSS

Features and Benefits

• Ice Production: Produces Up To 50 Pounds of Ice Per Day*.
• Ice Storage Capacity: 26 lbs.
• ADA Compliant: No
• Energy Star: No
• Panel Kits Available: PK1UG150RSS (Profile), CK1UP150RS1/D1/W2 (Café), ZK1UN150RS (Monogram)
• Handle Kits Available: CXQW1H1PPSS, CXQW1H1PPBT, CXQW1H1PPBZ, CXQW1H1PPCU, ZXGP1H1CPSS, ZXGP1H1PPSS, CXQW1H1PPCG, CXQW1H1PPFB
• Drain Pump Kit: Yes
• Water Filtration: Inline (GSWF)
• Ice Type: Clear
• Indicators: Clean indicator and Filter indicator provide light on unit/app notifications for water filter changes.
• F/S or BI Capable: Yes
• Indoor/Outdoor Capable: Indoor
• Smart Capable: Yes
• Control Type: Cap Touch Electronic Control
• Ice Scoop: Soft Touch Ice Scoop
• Internal Lighting: LED light
• Optional Kits: Drain pump kit UPK4 is available; Optional door and handle kits are available.
• Model: UCC15NPRII – Panel ready

*In a 24 hour period, the icemaker produces up to 50 pounds of ice in a 70 degree ambient/50 degree water temperature, or up to 48 pounds in a 90 degree ambient/70 degree water temperature.

Contact Information

For answers to your Monogram, GE Café™, GE Profile™, or GE Appliances product questions, visit the website at geappliances.com or call GE Answer Center Service at 800.626.2000.