Güde GW 6/1 XL Workbench

Delivered Items

• Part 1: Screws - 22x
• Part 2: Dowels - 15x
• Part 3: Cam Lock Bolts - 6x
• Part 4: Cam Locks - 4x
• Part 5: Adjustable Feet - 2x
• Part 6: Drawer Slides (Cabinet Member) - 8x
• Part 7: Screws for Drawer Slides (Cabinet) - 6x
• Part 8: Screws for Drawer Slides (Cabinet) - 6x
• Part 9: Support Brackets - 2x
• Part 10: Back Panel - 1x
• Part 11: Left Side Panel (with drawer slides) - 1x
• Part 12: Right Side Panels (for cabinet) - 2x
• Part 13: Drawer Bottom Panel - 1x
• Part 14: Workbench Top - 1x
• Part 15: Drawer Front Panel - 1x
• Part 16: Drawer Side Panel (Left) - 1x
• Part 17: Drawer Side Panel (Right) - 1x
• Part 18: Drawer Back Panel - 1x
• Part 19: Drawer Base Supports/Runners - 2x
• Part 20: Drawer Assembly Screws - 48x
• Part 21: Drawer Assembly Screws - 52x
• Part 22: Drawer Assembly Screws - 52x
• Part 23: Drawer Side Screws - 6x
• Part 24: Drawer Front Screws - 6x
• Part 25: Drawer Back Screws - 6x

Assembly Instructions

Step 1: Prepare Base Panels and Attach Feet

• Attach the two adjustable feet (Part 5) to the bottom of the left side panel (Part 11).
• Attach the two adjustable feet (Part 5) to the bottom of the two right side panels (Part 12).

[Diagram Description: This step involves screwing the adjustable feet into the base of the main vertical panels that form the legs of the workbench. A close-up view shows a cam lock bolt being inserted and secured with a cam lock, indicated by a [lock-icon].]

Step 2: Assemble Drawer Unit Frame

• Insert dowels (Part 2, 15x) into the designated holes on the left side panel (Part 11) and the drawer front (Part 15), drawer back (Part 18), and drawer side panels (Parts 16, 17).
• Insert cam lock bolts (Part 3, 6x) into the corresponding holes on the drawer front, back, and side panels.
• Connect the drawer front (Part 15), drawer back (Part 18), and drawer side panels (Parts 16, 17) to form the drawer box. Secure these connections using cam locks (Part 4, 4x) by turning them to engage the cam lock bolts.
• Slide the drawer bottom panel (Part 13, 1x) into the grooves on the assembled drawer box.
• Attach the drawer base supports/runners (Part 19, 2x) to the bottom edges of the drawer side panels using screws (Parts 20, 48x; 21, 52x; 22, 52x).
• Mount the drawer member slides (Part 6, 8x) to the outer sides of the drawer side panels (Parts 16, 17) using screws (Parts 23, 6x; 24, 6x; 25, 6x).

[Diagram Description: This sequence details the construction of the drawer box, including attaching sides, front, back, bottom, and the drawer slides. Arrows indicate the direction of assembly.]

Step 3: Assemble Cabinet Unit Frame

• Connect the two right side panels (Part 12) to form the cabinet structure, using dowels (Part 2) and cam lock bolts (Part 3) secured with cam locks (Part 4).
• Attach support brackets (Part 9, 2x) between the side panels using screws (Part 1, 22x).
• Slide the back panel (Part 10, 1x) into the rear grooves of the cabinet structure.

[Diagram Description: This step describes the assembly of the cabinet section of the workbench, showing how the side panels are joined and the back panel is inserted.]

Step 4: Attach Drawer Slides to Cabinet Unit

• Mount the cabinet member slides (Part 6, 8x) to the inner faces of the left side panel (Part 11) using screws (Part 7, 6x).
• Mount the cabinet member slides (Part 6, 8x) to the inner faces of the right side panels (Part 12) using screws (Part 8, 6x).

[Diagram Description: This step attaches the drawer slide components to the main cabinet frame structures. Arrows indicate the insertion points for screws.]

Step 5: Connect Drawer Unit and Cabinet Unit

• Join the assembled drawer unit (left side) and the cabinet unit (right side) together. This involves aligning the panels and securing them using the previously installed fasteners.

[Diagram Description: The two leg structures are brought together to form the base of the workbench. This step shows how the completed drawer unit and cabinet unit are connected.]

Step 6: Attach Workbench Top

• Place the workbench top (Part 14, 1x) onto the assembled base structure.
• Secure the top to the leg structures using cam lock bolts (Part 3, 6x) and cam locks (Part 4, 4x) inserted from underneath or through pre-drilled holes.

[Diagram Description: The main workbench surface is attached to the completed base. A close-up view shows the cam lock mechanism used for securing the top, indicated by a [lock-icon].]

Step 7: Insert Drawers

• Carefully slide the assembled drawers onto the mounted drawer slides within the drawer unit.

[Diagram Description: The completed drawers are inserted into their respective slide mechanisms within the workbench frame. Arrows indicate the direction of insertion.]

Step 8: Final Check

• Ensure all connections are secure and the workbench is stable.

[Diagram Description: A final view of the fully assembled workbench, confirming all parts are correctly installed and the unit is stable.]