Hoymiles Data Transfer Stick: Quick Installation Guide

1 Packing List

Each Hoymiles Data Transfer Stick package includes the following components:

DTS-WIFI-G1

• DTS-WIFI-G1 unit (x1)
• M3 Screw (x6)
• Document (x1)

DTS-Ethernet-G1

• DTS-Ethernet-G1 unit (x1)
• M3 Screw (x6)
• Document (x1)

DTS-4G-G1

• DTS-4G-G1 unit (x1)
• M3 Screw (x6)
• Document (x1)

2 Installing the Module

Follow the appropriate steps based on your DTS model and connection type.

WIFI and 4G Connection

Installation steps for WIFI and 4G enabled DTS modules:

1. Connect the DTS module to the designated communication port on the Hoymiles inverter.
2. For the DTS-4G-G1 model, attach the external antenna to the module.
3. Securely mount the DTS module using the provided M3 screws. Ensure the screws are tightened to a torque of 0.6-0.8 N·m.

Ethernet Connection

Installation steps for the Ethernet enabled DTS module:

1. Connect the DTS module to the designated communication port on the Hoymiles inverter.
2. Connect one end of an Ethernet cable to the DTS module's Ethernet port.
3. Connect the other end of the Ethernet cable to your network router.
4. Securely mount the DTS module using the provided M3 screws. Ensure the main connection is tightened to a torque of 0.8-1.5 N·m and the cable gland to 0.5-0.8 N·m.

3 Indicators

After powering on the inverter, observe the DTS indicators to check the communication status. The table below details the indicator functions:

4 DTS Online Setting

Follow these steps to connect your DTS module to the internet and the Hoymiles monitoring platform:

1. Download the App: Search for "Hoymiles" in the App Store (iOS) or Google Play Store (Android), or scan the QR code provided to download the Hoymiles Installer App.
2. Log In: Open the Hoymiles Installer App and log in using your installer account credentials. If you are a new installer, please apply for an account from your distributor in advance.
3. Connect to the DTS:
   1. On your smartphone or tablet, open the Hoymiles Installer App and log in. Navigate to the "O&M" section located at the bottom of the page, then tap on "Network Configuration".
   2. Select the DTS's wireless network (SSID). The network name typically consists of "DTS" followed by the product's serial number. Tap "Connect". The default password for the DTS Wi-Fi network is "ESS12345".
   3. You may receive a prompt on your device indicating it is not connected to the DTS Wi-Fi. Confirm the connection by tapping "OK".
4. Configure Network Settings:
   1. After successfully connecting to the DTS Wi-Fi, return to the "Network Configuration" screen within the app.
   2. Select your home or office router's Wi-Fi network from the list and enter the correct Wi-Fi password.
   3. Tap the "Send to DTU" button to transfer the network configuration to the DTS module.
5. Verify Connection: Check the indicator light on the DTS module. A solid blue light signifies a successful network connection. The network configuration process usually takes approximately one minute. If the DTS does not connect to the network, please verify your internet connection and router settings.

Once connected, the app will display a confirmation message, often showing network status as "Connection Succeeded" and providing details such as networking method, network quality, and server connection status.