iHome XT-54 True Wireless Earbuds

Package Contents

• XT-54 True Wireless Earbuds
• Charging Travel Case
• 8 Ear Cushions in 3 sizes (2 Small, 2 Large, 4 Medium)
• USB-A to USB-C Charging Cable
• Instruction Manual

Specifications

• Bluetooth® Version: 5.4
• Working distance: 33 ft
• Charge Connector: USB-C
• Speaker Size: 13 mm
• Frequency Response: 20Hz-20KHz
• Sensitivity: 92db±2db
• Charging Voltage: 5V/1A
• Case Battery: 230 mAh
• Case Charge time: Up to 1.5 hrs
• Earbuds Battery: 2 x 25 mAh
• Earbuds Charge time: Less than 1 hr.
• ANC Sensitivity: -26db±1db

Operation Guide

Diagram Description: The operation guide illustrates the iHome XT-54 earbuds and their charging case. An earbud is shown with callouts for the 'Microphone' and 'Control Surface'. The charging case features a 'USB-C Charge Port' and a 'Battery Display', with a digital indicator showing '188'.

Getting Started

Before using this device, fully charge it. Charging instructions can be found on page 6.

Pairing

1. Open the charging case and remove the earbuds. They will automatically pair with each other.
2. Navigate to Bluetooth® Settings on your mobile device.
3. Enable Bluetooth® on your device.
4. Select "iHome XT-54" from the list of available devices on your Bluetooth® device.

Using Siri or Google Assistant

On the left earbud, tap the control surface three times in rapid succession to activate your AI assistant. Ensure the AI assistant is enabled on your device beforehand.

ANC Functions

Active Noise Cancellation (ANC) is disabled by default.

• Tap the control surface of the right earbud 3 times to activate Transparency mode, allowing you to hear your surroundings without removing the earbuds.
• Tap the control surface of the right earbud 3 more times to enable ANC mode, which filters out ambient noise for a clearer audio experience.
• Tap the control surface of the right earbud 3 more times to disable ANC function.

Basic Functions

Right Earbud:

• Double tap the control surface to play or pause audio.
• Tap and hold for one second to skip to the next audio track.
• Single tap to increase the volume.

Left Earbud:

• Double tap the control surface to play or pause audio.
• Tap and hold for one second to skip to the previous audio track.
• Single tap to lower the volume.

Phone Calls:

Audio playback will pause automatically when a call is received. Call functions are identical for both earbuds.

• To answer an incoming call, tap the control surface of either earbud.
• To end a call, double tap the control surface.
• To reject an incoming call, tap and hold the control surface.

ENC (Environmental Noise Cancellation)

ENC is automatically engaged during phone calls or when interacting with your AI voice assistant.

Troubleshooting

Earbuds do not sync with each other:

1. Place both earbuds in the charging case, then remove them to ensure they are powered on.
2. On each earbud, press and hold the control surface for 5 seconds. The earbud will power off after its LED flashes purple 3 times.
3. Return the earbuds to the charging case.
4. Repeat the Getting Started process.

Earbuds do not pair to device:

1. Turn off the earbuds by pressing the control surface on each until the LED blinks red and then turns off.
2. Place the earbuds back in the case. Turn your device's Bluetooth® off, then turn it back on. Repeat the pairing process.

Charging

1. Place the earbuds inside the charging case.
2. Connect the USB-C charging cable to the charging port located at the bottom of the charge case.
3. Plug the cable into a standard USB power source rated at 5V/1A or higher.

When the case is connected to a charger, the LED display will show the current charge level with blinking lights, indicating it is charging.

The indicator lights on the earbuds will glow solid red while charging. These lights will turn off once the earbuds are fully charged or if the case is disconnected from the power source.

The case's LED display will show "100" and stop blinking upon full charge.

Once fully charged, promptly disconnect the charge case from the power source.

To charge the earbuds using the case's internal battery, simply place them back into the case. Charging will commence automatically from the case's battery.

Warnings

• Use this unit only for its intended purpose.
• Do not puncture, throw, drop, bend, or modify this product.
• Do not expose this product to fire or water.
• Avoid short-circuiting the battery with any metal or metallic objects.
• Do not expose this product to corrosive liquids, such as salt water.
• If the unit becomes wet or moist, do not operate it to prevent electric shock, injury, or damage to the unit.
• This product is not a toy and should not be used by children for play, as it may present a choking hazard.
• Avoid leaving your device in direct sunlight, such as on a vehicle's dashboard, console, or seat.
• Do not leave or use your device in environments where temperatures may fall below 32°F (0°C) or exceed 140°F (60°C), such as inside a closed vehicle on a hot day.
• Electrical equipment repairs should only be performed by a qualified electrician. Improper repairs can pose a serious risk to the user.
• Protect your hearing by maintaining a safe listening volume. Prolonged exposure to elevated volumes may impair hearing capacity and lead to hearing loss.
• Use the earbuds exclusively with their designated charging case.
• To prevent damage to the charging case, use only a USB 5V/1A or higher charger.
• To maintain battery health, charge the device at least once a month.

FCC Compliance

FCC ID: 2AHN6-AUBE248

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device must not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Note: This equipment has been tested and found to comply with the limits for a Class B digital device, as per part 15 of the FCC Rules. These limits are established to provide reasonable protection against harmful interference in residential installations. This equipment generates, uses, and can radiate radio frequency energy. If not installed and used according to the instructions, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a specific installation. If this equipment causes harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to attempt to correct the interference through one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for assistance.

Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

Warranty

Bytech NY INC. warrants this product to be materially free from defects and workmanship to the original purchaser for a period of 12 months from the original purchase date. Bytech's responsibility under this limited warranty is solely limited to the repair or replacement, at its discretion, of any product that fails during normal consumer use. This warranty does not cover damage or failure resulting from misuse, neglect, accident, alteration, abuse, improper installation, or maintenance. If the product fails due to defects in material or workmanship within the 12-month period following purchase, return the defective product (freight prepaid) along with proof of purchase.

Contact Information:

WWW.BYTECHINTL.COM

Bytech NY Inc

2585 West 13th Street

Brooklyn NY 11223

(718) 449-3700

©2024 BYTECH NY INC.

[Bluetooth® symbol] [BC certification mark] [CE mark] [FCC mark] MADE IN CHINA

*All trademarks and copyrights are the property of their respective companies.