Juniper Systems Mesa 3 Quick Start Guide
Your Office, Anywhere
Getting Started with Your Mesa 3
This guide provides essential steps to begin using your Juniper Systems Mesa 3 rugged tablet.
Step 1: Device Overview
The Juniper Systems Mesa 3 is a rugged tablet designed for demanding environments. It features a touchscreen display and various ports and buttons for functionality.
Step 2: Attaching the Hand Strap
Follow these steps to attach the hand strap for secure handling:
- Locate the compartment on the back of the device.
- Open the compartment cover.
- Insert the strap end labeled [label A] into the designated slot.
- Secure the strap by ensuring it passes through the retention mechanism.
- Close the compartment cover.
- Further secure the strap by looping it through the attachment points labeled [label B].
Visual Description: The process involves opening a rear compartment, feeding a strap through slots marked 'A' and 'B', and then closing the compartment.
Step 3: Connecting Power/Data
Connect the appropriate cable to the device's port.
Visual Description: A cable is shown being connected to a port on the side of the Mesa 3 tablet. An upward arrow indicates the connection direction.
Step 4: Device Status and Battery Life
The device screen displays important information, including battery status.
Visual Description: The Mesa 3 screen shows a battery indicator with an estimated life of "6-12 HOURS". Navigation buttons are visible below the screen.
Model Number: PN 28074-01
Support Resources: Visit www.junipersys.com/support/mesa-3 for full documentation and support.
Available in English, Español, Français, Deutsch, and Português Brasileiro.
