Shokz OpenFit 2+ User Manual

Application

Download the Shokz app to customize your listening experience. With the Shokz app, you can change EQ modes, connect to two devices, activate Dolby Audio, personalize buttons, update firmware, and adjust volume. Download the app now to simplify your Shokz experience.

*Apple and the Apple logo are trademarks of Apple Inc., registered in the U.S. and other countries. Google Play is a trademark of Google LLC.

Download on the App Store

GET IT ON Google Play

Contents

• Box Contents
• Wearing and Using
• Earbud Diagram
• Charging Case
• Pairing
• Wearing
• Operation and Control
• Music Control
• Call Control
• Volume Control
• Single Earbud Control
• LED Indicator
• Charging Case LED Indicator
• Power Source
• Power On/Off/Standby
• Charging the Earbuds
• Charging the Charging Case
• Wireless Charging of the Charging Case
• Additional Features
• Multipoint Pairing
• Dolby Audio
• Automatic Connection
• Find My Shokz
• Reset
• Maintenance
• Cleaning
• IP Rating
• After-Sales Service
• Serial Number Location
• Warranty

Box Contents

Your Shokz OpenFit 2+ package includes:

• 2 x OpenFit 2+ Wireless Earbuds
• 1 x OpenFit 2+ Charging Case
• 1 x OpenFit 2+ Packaging Box
• 1 x USB-C Charging Cable
• 1 x User Guide
• 1 x Legal Statement
• 1 x Warranty Card

Do not use the product if any of the above items are missing or if the product is damaged. Please contact your retailer or Shokz immediately.

Wearing and Using

Earbud Diagram

The earbuds feature:

• Touch Control Area (on the raised areas of the Shokz logo)
• Physical Buttons
• Ear Hooks
• Microphone (for voice calls only)

Charging Case

The charging case includes:

• Charging Case LED Indicator
• Charging Case Button
• Wireless Charging Coil

Pairing

First-time use: Open the charging case to immediately enter Bluetooth pairing mode. The indicator light will flash orange and green.

Subsequent pairings:

1. Place both earbuds in the charging case.
2. Press and hold the button inside the charging case for 3 seconds until the indicator lights flash orange and green, indicating the earbuds have entered pairing mode.
3. Enable Bluetooth on your device and select "OpenFit 2+ by Shokz". The device will indicate successful pairing upon completion.

Wearing

1. Remove the earbuds from the case.
2. Place the earbuds over your ears.
3. Gently pivot the earbuds backward so the ear hooks wrap around your ears.
4. You are now ready to use the earbuds.

Operation and Control

Music Control

• Play/Pause Music: Press one of the physical buttons once while listening to music.
• Next Track: Double-press one of the physical buttons while listening to music.
• Previous Track: Triple-press one of the physical buttons while listening to music.

*Operating steps may vary depending on software. Consider actual usage for precision.

Call Control

• Answer/End Call: Press one of the physical buttons once.
• Reject Call: Double-press one of the physical buttons.

Volume Control

• Decrease Volume: Press and hold the left physical button.
• Increase Volume: Press and hold the right physical button.

# Continuous Volume Control: While music or calls are active, press and hold the corresponding earbud until the desired volume is reached.

Single Earbud Control

The earbuds are designed for independent use, allowing music playback in mono or taking calls. When used individually, each earbud retains its respective button functionality. Refer to page 13 for music control and page 14 for call control.

LED Indicator

Charging Case LED Indicator

Earbuds in Charging Case:

• High Battery Level: Green light turns off after 5 seconds upon opening.
• Low Battery Level: Orange light turns off after 5 seconds upon opening.

*Note: When both earbuds are in the case, the indicator displays the power status of the earbud with the lowest battery level.

Earbuds out of Charging Case:

• Charging Case with High Battery Level: Green light turns off after 5 seconds upon opening, closing, or pressing the case button.
• Charging Case with Low Battery Level: Orange light turns off after 5 seconds upon opening, closing, or pressing the case button.

Connected to External Power:

• Charging: Solid orange indicator.
• Charge Complete: Solid green indicator.

Other:

• Pairing: Orange and green indicator flashes.
• Factory Data Reset: Orange indicator flashes for 5 seconds.

Power Source

Power On/Off/Standby

Power On: When the earbuds are placed in the charging case, opening the case activates the indicator light and turns on the earbuds.

*Note: Closing the charging case after removing the earbuds helps preserve battery life and prevents debris from entering the case.

Power Off: When the charging case is closed with both earbuds inside, they automatically turn off.

Standby: If the earbuds are out of the case and disconnected for 3 minutes, they enter standby mode to conserve battery.

Charging the Earbuds

Place the earbuds in the charging case until they magnetically attach. Close the charging case once the indicator light is on.

LED Indicators:

• Green light indicates a high battery level.
• Orange light indicates a low battery level.

*Note: The charging case LED indicator shows the battery status of the earbuds. If both earbuds are in the case, the indicator shows the power status of the earbud with the lower battery level.

• The earbuds will reach full charge in approximately 60 minutes inside the charging case. Ensure the charging case has sufficient battery to charge the earbuds.

Charging the Charging Case

Connect the USB-C to USB-C charging cable to the charging case and plug it into a certified power adapter or wall charger. A solid orange light on the charging case indicates it is charging, while a solid green light indicates it is fully charged.

*Note:

• At 25 ± 2°C, once the earbuds have played music until they automatically turn off, place them in a fully charged case: they will recharge in approximately 60 minutes. This charging time is based on tests conducted at Shokz Lab. Actual results may vary based on environment, product characteristics, and usage habits. Consider actual usage for precision.
• It operates using the standard USB 5V±5% voltage. Shokz advises against using high-voltage power sources to charge the earbuds, as this could damage them. Additionally, using third-party charging cables may result in longer charging times.
• Before charging, ensure the charging port is dry and free of liquid residue, such as sweat. Use a soft, dry cloth to wipe away any moisture or residue from the charging port.

Wireless Charging of the Charging Case

The case is compatible with Qi-certified wireless charging. Follow these steps for correct charging:

1. Configure the Charger: Connect your Qi-certified wireless charger to a power source and ensure it is functioning correctly.
2. Position the Charging Case: Place the case centered on the wireless charger with the logo facing up, ensuring it is properly aligned with the charging contacts.
3. Check the Indicator Light: The orange light will remain on during charging. When it turns solid green, the case is fully charged.

Additional Features

Multipoint Pairing

*Please update the Shokz app to the latest version from the App Store. Follow the instructions to update the earbud firmware to the latest version. Ensure Bluetooth is enabled on your pairing device.

1. First, connect the earbuds to your phone and then select "Multipoint Pairing" in the Shokz app.
2. On the contextual page, confirm to open the Multipoint Pairing function.
3. Select "Connect to a second device" and follow the instructions to establish a connection with the second device.
4. Your earbuds are now connected to two devices. You can easily manage your Bluetooth connections via the Shokz app.

Dolby Audio

1. Enhanced Sound Quality: Dolby Audio enhances sound by producing crystal-clear audio, rich details, and an immersive surround sound experience for a captivating musical and entertainment journey. You can easily enable or disable Dolby Audio via the Shokz app.
2. Configuration: Ensure your earbuds and mobile phone are connected, then open the Shokz app.
3. Toggle to Activate: Activate the Dolby Audio button to enable or disable it.

Automatic Connection

1. Once the earbuds are powered on, they will automatically attempt to connect to the last paired device and emit a beep to indicate a successful connection.
2. During use, the earbuds may disconnect from the paired device due to connection range limitations. If they come back within range within 3 minutes, they will automatically re-establish the connection with the last paired device, emitting a sound to indicate successful reconnection.
3. If the earbuds return to the connection range after 3 minutes, press one of the physical buttons to trigger automatic reconnection.
4. With multipoint pairing enabled, simply press one of the physical buttons to reconnect to both devices.

Find My Shokz

1. Ensure your earbuds are connected to your phone. Then, open the Shokz app and select "Find My Shokz".
2. Select the earbuds you wish to locate from the displayed list.
3. Select "Ring". Your earbuds will start emitting a loud sound to help you find them.

Reset

Resetting the earbuds will erase the list of paired devices and reset all parameters.

1. Place both earbuds in the charging case.
2. Press and hold the case button for 15 seconds. The indicator will flash orange (for 5 seconds) to confirm the reset. Then, the indicator will flash orange and green, indicating the earbuds have entered pairing mode.

Maintenance

Cleaning

1. Earbuds

• Use a soft, clean, and dry cloth to wipe the earbuds.
• When cleaning the earbud mesh, gently remove dirt and earwax with a dry cotton swab, then wipe with a soft cloth.
• Note: Ensure the earbuds are powered off and disconnected from all devices before cleaning.
• Do not wash the earbuds with water or use ultrasonic cleaning.
• Prevent any liquid from entering the earbud openings.
• Do not use abrasive cleaners, high-concentration chemicals, alcohol, or acetone-based solvents, as they may cause damage, deformation, or discoloration.
• Avoid using sharp or abrasive objects.

2. Charging Case

• Use a soft, clean, and dry cloth to wipe the exterior of the charging case.
• Use a soft, clean, and dry brush to remove debris from the charging interface.
• Gently wipe the charging contact surface inside the charging case with a clean, dry cotton swab.

IP Rating

Tested under controlled laboratory conditions, the earbud components of this product are resistant to dust, sweat, and water at an IP55 level in accordance with IEC 60529.

Note:

• The IP55 rating for dust, sweat, and water resistance applies only to the earbuds and does not apply to the charging case.
• The dust, sweat, and water resistance function is subject to degradation with regular use.
• Do not immerse the product in water and avoid prolonged exposure to humid conditions.
• Do not use the product during activities such as swimming, skiing, surfing, or other water sports.
• In case of accidental exposure to water, quickly wipe the product and accessories, then let them air dry in a cool, ventilated place. Avoid any use or charging until completely dry.

After-Sales Service

Serial Number Location

The product's serial number can be found on the barcode of the packaging and the warranty card. Additionally, the charging case has a serial number printed next to the charging port.

Warranty

Your earbuds are covered by a warranty. Visit the Shokz website at https://shokz.com/pages/warranty-return for more details on the limited warranty.